Canon WebView Livescope Manuale utente

 

           

Thank you for purchasing the “Viewer for Pocket PC RV-P1.0” (referred to hereafter as the

viewer).

Read this manual carefully before you use this viewer to make the best use of it.

Make sure to read the Readme file provided on the supplied CD-ROM.

The latest product information is available at the following Web site:

http://www.canon.com/webview/

Notice

1. Unauthorized transfer or duplication of all or part of this manual is prohibited.

2. The content of this manual is subject to change without notice.

3. Every effort has been made to ensure that the information contained in this manual is

correct. If any error or omission is found, contact us directly or an authorized Canon

representative.

4. Canon is not responsible for any damages, direct or indirect, arising from or related to

the use of this viewer.

Copyrights

Please note that copyright laws prohibit you from using recorded videos and still pictures

for any purpose other than personal enjoyment without permission from the copyright

holder.

Trademarks

zCanon and Canon logo are registered trademarks of Canon Inc.

zMicrosoft®, Windows®, ActiveSync and Microsoft Internet Explorer are trademarks or

registered trademarks of Microsoft Corporation in the United States and/or other

countries.

zWindows is formally referred to as Microsoft Windows Operating System.

zJava and all Java-based marks are trademarks or registered trademarks of Sun

Microsystems, Inc. in the United States and/or other countries.

zOther product and company names mentioned in this manual may be the trademarks or

registered trademarks of their respective owners.

Conventions Used in this Manual

To ensure your safe and most efficient use of this viewer, the points to be paid careful

attention are provided under headings as listed below. Make sure to understand what these

headings stand for when you read this manual and observe the provisions thoroughly when

you use the viewer.

Note

Indicates restrictions and other important issues on operation of this viewer that

you should comply with. To avoid damaging the equipment and causing break

down and malfunction, read these notes carefully and observe.

Tip

Indicates tips and hints that help you to operate the viewer more efficiently and

other supplemental information.

Introduction

Terms and Definitions

Tap:

Operation to touch the liquid crystal screen once with the stylus, a writing tool

attached to the Pocket PC terminal.

Tap-and-hold:

Operation to tap the stylus on an item and hold it for a while. Use this to display a

menu.

Drag:

Operation to tap and move the stylus while the tip of the stylus still touches the screen.

Use this for operations such as shifting the scroll bar as you drag the item with a

mouse.

Navigation button:

A crosswise key on the Pocket PC terminal. It may be called the Cursor button in

some Pocket PC terminals.

iii

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1-1. Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2. Installing and Uninstalling the Viewer . . . . . . . . . . . . . . . . . . . . . 2

2-1. Installing the Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2-2. Uninstalling the Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

3. Starting and Closing the Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3-1. Starting the Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3-2. Closing the Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

4. Connecting to the Camera Server . . . . . . . . . . . . . . . . . . . . . . . . 4

4-1. Connecting to the Camera Server by Entering Address Directly . . . . . 4

4-2. Connecting to the Camera Server Already Registered . . . . . . . . . . . . . 4

5. Using the Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

5-1. Viewer Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

5-2. Operating the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5-3. Specifying Various Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

7. Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

1.Overview

This software is designed to view video distributed from the camera server on the Pocket

PC terminal through the Internet or LAN. If the VC-C4 or other cameras that can be

controlled from the viewer are connected to the camera server, you can control various

camera operations such as: panning, tilting, zooming and backlight compensation while

viewing the video on the screen.

1-1. Operating Environment

Software

• Microsoft Pocket PC 2002 Software (Windows CE 3.0)

Supported Camera Servers

• Network Camera Server VB101*

• Network Camera Server VB150

• Network Camera VB-C10/VB-C10R

* When you are using the Network Camera Server VB101, upgrade the firmware to Ver. 3.0

(free) to use the viewer. For the latest information, visit the Web site below.

http://www.canon.com/webview/

Internet

Intranet

Video Distributor Viewer

Camera Server

Distributing live video

Operating camera by

remote control PDA

The viewer requires that ActiveSync be installed on the PC. If it is not installed, be sure to

install it before installing the viewer.

2-1. Installing the Viewer

Start ActiveSync and transfer the cabinet file, Livescope_Pocket2002_ARM_E.cab from

CD-ROM to your Pocket PC.

Tap the transferred cabinet file to install the viewer.

Installation is now complete.

2-2. Uninstalling the Viewer

Select Settings from the Start menu and tap System.

Tap Remove Programs.

Select Canon Livescope from the list and tap the Remove button.

Reset your Pocket PC as there is a possibility that the application icon may remain on the

screen.

Uninstallation is now complete.

Tip

zUse ActiveSync provided with your Pocket PC.

zIf a trial version of the viewer is already installed, you need to uninstall it and reset your

Pocket PC before installing the viewer.

Tip

The viewer can be installed by the following methods as well.

• Start File Explorer in the Pocket PC, directory copy the cabinet file on the PC to your

Pocket PC, and then tap the copied cabinet file.

• Copy the cabinet file to CompactFlash, and tap the file on the Pocket PC.

2. Installing and Uninstalling the Viewer

3. Starting and Closing the Viewer

3-1. Starting the Viewer

3-1-1. To start up from the viewer

Tap the icon of the viewer in the Programs folder to start up the viewer.

No connection to the camera

server is established when the

viewer is started up

independently (ÆP. 4).

3-1-2. To start up from the Web Browser

Access the Web site that distributes live video from Pocket Internet Explorer and tap the

Using Viewer for PC button or Using Helper button. The viewer starts up and the

connection to the camera server is established.

Once connection to the camera

server is established, the server

is automatically registered in

the camera site list (ÆP. 9) o f

the viewer.

3-2. Closing the Viewer

Select Exit from the File menu to close the viewer.

4. Connecting to the Camera Server

Connection to the camera server can be established in two major methods as follows.

4-1. Connecting to the Camera Server by Entering Address Directly

Enter IP address or host name in the address box (ÆP. 5) directly and tap the Enter key.

The video port (ÆP. 10) can also be specified with “:” (a colon) separator; however, there

is no need to specify it.

To specify the video port:

4-2. Connecting to the Camera Server Already Registered

Open the address box (ÆP. 5) to display a drop-down list and select the camera site name.

For details about registering camera servers, refer to “5-3-1. Camera Site List” (ÆP. 9 ) .

Tip

Once connection to the camera server is established, the server is automatically registered in

the camera site list (ÆP. 9) of the viewer.

5. Using the Viewer

5-1. Viewer Screen

5-1-1. Normal Mode

1. Image window:

Displays image.

2. Full Screen button:

Displays image in Full Screen Mode (ÆP. 6 ) .

3. Zoom slider:

Zooms the camera in and out. Drag to the right to zoom in (telephoto view) and drag

to the left to zoom out (wide-angle view) (ÆP. 8).

4. Pause/Restart button:

Pauses image during play or starts play if currently stopped (ÆP. 8 ) .

5. Help/Status display:

Displays help message or the status of the camera (ÆP. 1 2 ) .

6. Tilt Indicator:

Indicates the tilt position of the camera head (ÆP. 8, 13).

7. Control Status panel:

Displays the camera control status. The display may differ depending on the

status (ÆP. 7 ) .

8. Pan Indicator:

Indicates the pan position of the camera head (ÆP. 8, 13).

9. Backlight Compensation button:

Switches between backlight compensation ON and OFF (ÆP. 8 ) .

10.Start Control button:

Obtains camera control privileges. The display may differ depending on the

control status (ÆP. 7).

11.Connection Time display:

Displays the period of time connected to the camera server.

12.Address box:

Displays, enters or selects the address of camera server to be connected.

2. Full Screen button

1. Image window

3. Zoom slider

5. Help/Status display

6. Tilt Indicator

7. Control Status panel

8. Pan Indicator

Compensation button

10. Start Control button

11. Connection Time

display

12. Address box

9. Backlight

4. Pause/Restart button

5-1-2. Full Screen Mode

Tap the Full Screen button (ÆP. 5) to switch to Full Screen Mode when the viewer is in

Normal Mode.

1. Image window:

Displays image.

2. Camera Control/View Settings menu:

Tap-and-hold (ÆP. ii) the stylus on the image window to display the menu. From

this menu, you can return to Normal Mode (ÆP. 5), show or hide the camera

position (ÆP. 13), obtain camera control privileges (ÆP. 7), choose preset or camera

and turn backlight compensation ON and OFF (ÆP. 8 ) .

3. Zoom Indicator:

Displays the zoom ratio of the camera. A colored bar is displayed long when the

camera zooms in and short when the camera zooms out (ÆP. 8, 13).

4. Pan Indicator:

Indicates the pan position of the camera head (ÆP. 8, 13).

5. Tilt Indicator:

Indicates the tilt position of the camera head (ÆP. 8, 13).

Tip

An error message (ÆP. 17) does not appear when the viewer is in Full Screen Mode. If an

error occurs while in this mode, an error message appears after you return the display to

Normal Mode.

1. Image Window

4. Pan Indicator

5. Tilt Indicator

2. Camera Control/

View Settings menu

3. Zoom Indicator

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Canon Software

Canon

Canon Selphy CP510 Istruzioni per il montaggio

Canon

Canon N1240U - CanoScan Flatbed Scanner Manuale utente

Canon

Canon CanoScan D1230UF Manuale utente

Canon

Canon PowerShot A200 Istruzioni per il montaggio

Canon

Canon 0286B001 - Optura S1 Camcorder Manuale utente

Canon

Canon ScanGear CS-S 4.3 Manuale utente

Canon

Canon 9320A010 - EOS Rebel XSi Starter Manuale utente

Canon

Canon 0286B001 - Optura S1 Camcorder Manuale utente

Canon

Canon N1240U - CanoScan Flatbed Scanner Manuale utente

Canon

Canon MLT (F) Manuale utente

Canon

Canon WebView LivescopeMV Manuale utente

Canon

Canon Powershot A3100 IS Guida rapida

Canon

Canon PowerShot G10 - Digital Camera - Compact Guida di sicurezza

Canon

Canon VIXIA HR10 Manuale utente

Canon

Canon HG-10 Manuale utente

Canon

Canon CanoScan FB620P Manuale utente

Canon

Canon EOS 7D Mark II (G) Manuale utente

Canon

Canon Powershot A650 IS Guida di sicurezza

Canon

Canon DC22 - 2.2MP DVD Camcorder Manuale utente

Canon

Canon HG-10 Manuale utente

Canon

Canon FS10 Manuale utente

Canon

Canon DV-PC Istruzioni per il montaggio

Canon

Canon 0744B001 - DC 10 Camcorder Manuale utente

Canon

Canon CANOSCAN D660U Manuale utente

Manuali Software popolari di altre marche

COMPRO

COMPRO COMPROFM Manuale utente

Muratec

Muratec OFFICEBRIDGE ONLINE Manuale utente

Oracle

Oracle Contact Center Anywhere 8.1 Manuale utente

Adobe

Adobe 65007312 - Photoshop Lightroom Manuale

Avaya

Avaya NULL One-X for RIM Blackberry Manuale utente

HP ProLiant BL420c Manuale utente

PS Audio

PS Audio PowerPlay Manuale del proprietario

Brady

Brady LOCKOUT PRO 3.0 Manuale di servizio

Avaya

Avaya Interaction Center Manuale utente

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuale

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuale utente

Oracle

Oracle Application 9i Manuale utente

Acer

Acer RDM Manuale utente

Samsung

Samsung Auto Backup Manuale utente

Polycom

Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuale utente

Novell

Novell SP2 - S Manuale di istruzioni

Lexmark

Lexmark Apps Manuale di servizio