Caple CR 9207 Manuale utente

Contact Caple on 0844 800 3830 or for spare parts www.4caple.co.uk
Instruction manual for range cooker
Models code: CR 1207 - CR 9207

2
Declaration of CE conformity
•
This cooker has been designed, constructed and marketed in compliance with:
- Safety requirements of Directive “Gas” 2009/142/EC;
- Safety requirements of EU Directive “Low Voltage” 2006/95/EC;
- Protection requirements of EU Directive “EMC” 2004/108/EC;
- Requirements of EU Directive 93/68/EEC.
- Requirements of EU Directive 2011/65/EU.
For Product Service or Spare Parts
please check contact details at:
www.caple.co.uk
Important information for correct disposal of the product in
accordance with EC directive 2002/96/EC.
At the end of its working life, the product must not be disposed of as
urban waste. It must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative
consequences for the environment and health deriving from inappropriate
disposal and enables the constituent materials to be recovered to obtain
significant savings in energy and resources. As a reminder of the need to
dispose of household appliances separately, the product is marked with
a crossed-out wheeled dustbin.
GB
Thank you for buying your new Caple cooker.
To ensure that you get the best results from your new Caple cooker, we strongly
suggest that you read this instruction manual thoroughly before use.
This manual contains installation advice, cleaning tips and a cooking guide, as well
as other important facts about your Caple cooker.
If treated with care, your Caple appliance should give you years of trouble-free
cooking.

3
IMPORTANT SAFETY PRECAUTIONS AND RECOMMENDATIONS
IMPORTANT: This appliance is designed and manufactured
solely for the cooking of domestic (household) food and is
not suitable for any non domestic application and therefore
should not be used in a commercial environment.
The appliance guarantee will be void if the appliance is used
within a non domestic environment i.e. a semi commercial,
commercial or communal environment.
Read the instructions carefully before installing and using
the appliance.
• After having unpacked the appliance, check to ensure that it is not
damaged and that the oven door closes correctly.
In case of doubt, do not use it and consult your supplier or a profes-
sionally qualied technician.
• Packing elements (i.e. plastic bags, polystyrene foam, nails, packing
straps, etc.) should not be left around within easy reach of children,
as these may cause serious injuries.
• Some appliances are supplied with a protective lm on steel and
aluminium parts. Thislmmustberemovedbeforeusingtheap-
pliance.
• IMPORTANT: The use of suitable protective clothing/gloves is re-
commended when handling or cleaning of this appliance.
• Do not attempt to modify the technical characteristics of the applian-
ce as this may become dangerous to use. The manufacturer declines
all responsability for any inconvenience resulting from the inobser-
vance of this condition.
• CAUTION: this appIiance must only be installed in a permanently
ventilated room in compliance with the applicable regulations.
• Do not carry out cleaning or maintenance operations on the applian-
ce without having previously disconnected it from the electric power
supply.
• WARNING: Ensure that the appliance is switched off before repla-
cing the oven lamp to avoid the possibility of electric shock.
• Do not use a steam cleaner because the moisture can get into the
appliance thus make it unsafe.

4
• Do not touch the appliance with wet or damp hands (or feet).
• Do not use the appliance whilst in bare feet.
• If you should decide not to use this appliance any longer (or decide to
substitute another model), before disposing of it, it is recommended
that it be made inoperative in an appropriate manner in accordance
to health and environmental protection regulations, ensuring in par-
ticular that all potentially hazardous parts be made harmless, espe-
cially in relation to children who could play with unused appliances.
• The various components of the appliance are recyclable. Dispose of
them in accordance with the regulations in force in your country. If the
appliance is to be scrapped, remove the power cord.
• After use, ensure that the knobs are in the off position.
• Children less than 8 years of age shall be kept away unless conti-
nuously supervised.
• This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given super-
vision or instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
• The manufacturer declines all liability for injury to persons or damage
to property caused by incorrect or improper use of the appliance.
• WARNING: During use the appliance and its accessible parts beco-
me hot; they remain hot for some time after use.
– Care should be taken to avoid touching heating elements (on the
hob and inside the oven).
– The door is hot, use the handle.
– To avoid burns and scalds, young children should be kept away.
• Make sure that electrical cables connecting other appliances in the
proximity of the cooker cannot come into contact with the hob or be-
come entrapped in the oven door.
• WARNING: Unattended cooking on a hob with fat or oil can be dan-
gerous and may result in re. NEVER try to extinguish a re with
water, but switch of the appliance and then cover ame e.g. with a lid
or a re blanket.

5
• WARNING: Danger of re: do not store items on the cooking surfa-
ces.
• WARNING: When correctly installed, your product meets all safety
requirements laid down for this type of product category. However
special care should be taken around the rear or the underneath of
the appliance as these areas are not designed or intended to be tou-
ched and may contain sharp or rough edges, that may cause injury.
• FIRST USE OF THE OVEN - it is advised to follow these instructions:
– Furnish the interior of the oven as described at chapter “CLEA-
NING AND MAINTENANCE”.
– Switch on the empty oven on max to eliminate grease from the
heating elements.
– Disconnect the appliance from the electrical power supply, let the
oven cool down and clean the interior of the oven with a cloth soa-
ked in water and neutral detergent; then dry carefully.
• CAUTION: Do not use harsh abrasive cleaners or sharp metal scra-
pers to clean the oven door glass since they can scratch the surface,
which may result in shattering of the glass.
• Do not line the oven walls with aluminium foil. Do not place baking
trays or the drip tray on the base of the oven chamber.
• FIRE RISK! Do not store ammable material in the oven or in the
storage compartment.
• Always use oven gloves when removing the shelves and food trays
from the oven whilst hot.
• Do not hang towels, dishcloths or other items on the appliance or its
handle – as this could be a re hazard.
• Clean the oven regularly and do not allow fat or oils to build up in the
oven base or tray. Remove spillages as soon as they occur.
• Do not stand on the cooker or on the open oven door.
• Always stand back from the appliance when opening the oven door
to allow steam and hot air to escape before removing the food.
• SAFE FOOD HANDLING: Leave food in the oven for as short a time
as possible before and after cooking. This is to avoid contamination
by organisms which may cause food poisoning. Take particular care
during warmer weather.
• WARNING: Taking care NOT to lift the cooker by the door handle.

6
1 - Electrical Requirements
WARNING!
ELECTRICITY CAN BE EXTREMELY DANGEROUS.
THIS APPLIANCE MUST BE EARTHED.
For your safety please read the following information:
This appliance must be installed by a qualied technician according with the current local
regulations and in compliance with the manufacturer instructions.
The appliance must be connected to the electrical network verifying above all that the
voltage corresponds to the value indicated on the specifications plate and that the cables
section of the electrical plant can bear the load which is also indicated on the plate.
The cooker must be connected directly to the mains placing an omnipolar switch with
minimum opening between the contacts of 3 mm between the appliance and the mains.
The power supply cable must not touch the hot parts and must be positioned so that
it does not exceed 75°C at any point.
Once the cooker has been installed, the switch must always be accessible.
Before effecting any intervention on the electrical parts the appliance must be
disconnected from the network.
IMPORTANT: This cooker must be connected to a suitable double pole control
unit adjacent to the cooker.
NO DIVERSITY CAN BE APPLIED TO THIS CONTROL UNIT.

7
Electrical feeder cable
connection
To connect the feeder cable to the cooker
it is necessary to:
– Remove the screw that hold shield “A”
behind the cooker (fig. 1.2).
– Insert the feeder cable of the suitable
section (as described in the next
chapter) into the cable clamp “D”.
– Connect the phase and earth cables
to the terminal block “B” according to
the diagram in figure 1.3.
– Pull the feeder cable and block it with
cable clamp “D”.
– Re-mount shield “A”.
N.B. The earth conductor must be left
about 3 cm longer than the others.
Fig. 1.2
D
B
A
230 V
PEN
L1
(L2)
Fig. 1.3
PE
Electrical Installation - Wall box connection
FEEDER CABLE SECTION
type H05RR-F
230 V 3 x 2,5 mm2
(**)
(**) – Connection with wall box connection.
PE Earth
N Neutral
L Live
This appliance must be connected to a
double pole isolating switch (fig. 1.1) and
to the terminal block in the cooker (figs.
1.2, & 1.3) using the following guide:
FUSE
DOUBLE POLE SWITCHED
FUSED SPUR OUTLET
USE A 20 AMP FUSE
ON
Fig. 1.1
1) The wire which is coloured brown
must be connected to the terminal
marked L(Live), or coloured Red.
2) The wire which is coloured blue must
be connected to the terminal marked
N(Neutral), or coloured Black.
3) The wire which is coloured green
and yellow must be connected to
the terminal marked E(Earth)
or coloured Green.
IMPORTANT: These connections must
be carried out by a qualified electrical
engineer.

8
2 - Location
FOR THE INSTALLER
500 mm
650 mm
450 mm
200 mm
650 mm
500 mm
450 mm
200 mm
The appliance is designed and
approved for domestic use only
and should not be installed in a
commercial, semi commercial or
communal environment.
Your product will not be guaranteed
if installed in any of the above
environments and could affect
any third party or public liability
insurances you may have.
If the cooker is installed adjacent
to furniture which is higher than the
gas hob cooktop, a gap of at least
200 mm must be left between the
side of the cooker and the furniture.
The furniture walls adjacent to the
cooker must be made of material
resistant to heat.
The veneered synthetic material
and the glue used must be resistant
to a temperature of 90°C in order
to avoid ungluing or deformations.
Curtains must not be fitted
immediatly behind appliance or
within 500 mm of the sides.
It is essential that the cooker is
positioned as stated in (Figs. 2.1a
- 2.1b).
This cooker has class “2/1” overheating protection so that it can be installed next
to a cabinet.
The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but
not in a room or space containing a bath or a shower.
The appliance must not be installed in a bed-sitting room of less than 20 m3.
The cooker must be installed
by a qualified technician and
in compliance with local safety
standards.
If the cooker is located on a
pedestal it is necessary to provide
safety measures to prevent falling
out. Fig. 2.1b
Fig. 2.1a
Model CR 9207
Model CR 1207

9
The adjustable feet must be fitted
to the base of the cooker before
use.
Rest the rear of the cooker on a
piece of the polystyrene packaging
exposing the base for the fitting of
the feet.
Fit the 4 legs by screwing them
tight into the support base as
shown in picture 2.3.
Levelling the cooker
The cooker may be levelled by
screwing the lower ends of the feet
IN or OUT (fig. 2.4).
Fig. 2.2
Fig. 2.3
Fig. 2.4
Fitting the adjustable feet and levelling the cooker - Model CR 9207

10
Levelling the cooker - Model CR 1207
Fig. 2.5
+ 8
mm
+ 8
0
mm
+ 35
mm
Fig. 2.6a
Fig. 2.6b
The cooker is already fitted with four
levelling feet.
Level the cooker by screwing or
unscrewing the feet (Fig. 2.5).
Make sure you follow the instructions
in Figs. 2.6a and 2.6b.
Note: bolts are supplied with the cook-
er in a separate kit.
Indice
Altri manuali Caple Fornello

Caple
Caple CR1001SS Manuale utente

Caple
Caple CR 9200 Manuale utente

Caple
Caple CR9228 Manuale utente

Caple
Caple GR1201 Gastron Manuale utente

Caple
Caple CR9209 Manuale utente

Caple
Caple C876I Manuale utente

Caple
Caple CRG 902 SS Manuale utente

Caple
Caple CR 9227 Manuale utente

Caple
Caple CR 1003 SS Manuale utente

Caple
Caple CR 7200 Manuale utente

Caple
Caple CR9111 Manuale utente

Caple
Caple CR 13400 Manuale utente

Caple
Caple CR9206 Manuale utente

Caple
Caple CR 1002 SS Manuale utente

Caple
Caple C 502 M Manuale utente

Caple
Caple CR 9110 Manuale utente

Caple
Caple CR 9100 Manuale utente

Caple
Caple C 5210 Manuale utente

Caple
Caple CR 9218 Manuale utente

Caple
Caple CR 1100 Manuale utente




















