Car-Interface CI-UCON7-JEEP Manuale utente

Version 23.06.2020 HW CAM(V98) / (V43) CI-UCON7-JEEP

r.LiNK Video-inserter

CI-UCON7-JEEP

Compatible with

Fiat und Jeep vehicles

with Uconnect 7inch infotainment

Video-inserter for front- and rear-view camera

and two additional video sources

Product features

Video-inserter for factory-infotainment systems

1 CVBS Input for rear-view camera

1 CVBS Input for front camera

2 CVBS video-inputs for after-market devices (e.g. USB-Player, DVB-T2 tuner)

Automatic switching to rear-view camera input on engagement of the reverse gear

Automatic front camera switching after reverse gear for 10 seconds

Video-in-motion (ONLY for connected video-sources)

Video-inputs NTSC and PAL compatible

Version 23.06.2020 HW CAM(V98) / (V43) CI-UCON7-JEEP

Page2

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Checking the interface compatibility of vehicle and accessories

1.3. Connectors - video interface

1.4. Connectors - daughter PCB)

1.5. Dip-switch settings

1.5.1. 8 dip –black

1.5.1.1. Activating the front camera input (dip 1)

1.5.1.2. Enabling the interface’s video inputs (dip 2-3)

1.5.1.3. Rear-view camera setting (dip 5)

1.5.1.4. Monitor size (dip 8)

1.5.2. 4 dip - red

2. Installation

2.1. Place of installation

2.2. Connection scheme

2.3. Installation - Ribbon cables into the monitor panel

2.3.1. Warning notes, concerning the installation of ribbon cables

2.4. Connection –20pin picture signal cable

2.5. Connection –10pin Power / CAN cable

2.6. Analogue power supply

2.7. Power supply output

2.8. Connection –video sources

2.8.1. Audio insertion

2.8.2. After-market front camera

2.8.3. After-market rear-view camera

2.8.3.1. Case 1: Interface receives the reverse gear signal

2.8.3.2. Case 2: Interface does not receive the reverse gear signal

2.9. Connection –external keypad

3. Interface operation by external keypad

4. Picture settings

5. Specifications

6. Frequently asked questions

Version 23.06.2020 HW CAM(V98) / (V43) CI-UCON7-JEEP

Page3

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. This product should only

be used while standing or to display fixed menus or rear-view-camera video when the

vehicle is moving, for example the MP3 menu for DVD upgrades.

Changes/updates of the vehicle’s software can cause malfunctions of the interface. We

offer free software-updates for our interfaces for one year after purchase. To receive a free

update, the interface must be sent in at own cost. Labour cost for and other expenses

involved with the software-updates will not be refunded.

1. Prior to installation

Read the manual prior to installation.

Technical knowledge is necessary for installation. The place of installation has to be free of

moisture and away from heat sources.

1.1. Delivery contents

Version 23.06.2020 HW CAM(V98) / (V43) CI-UCON7-JEEP

Page4

Requirements

Brand

Compatible vehicles

Compatible systems

Fiat

500 since 07/2016 (model year since 2017)

500L since 06/2017 (model year since 2018)

500X since 11/2017 (model year since 2018)

Uconnect LIVE HD/ Nav LIVE HD

with 7inch monitor

(VP2-312-7in + VP2 334 7in)

Jeep

Compass since model year 2018

Renegade Facelift since model year 2019

Wrangler JL since model year 2019

Uconnect Multimediasystem

with 7inch Monitor

(VP2RFP)

Limitations

Video only The interface inserts ONLY video signals into the infotainment.

For inserting Audio signals either the possibly existing factory audio-AUX-input

or a FM-modulator can be used.

In case that 2 AV sources shall be connected, a desired audio switching will

require additional electronic.

Factory rear-view camera Automatically switching-back from inserted video to factory rear-view camera

is only possible while the reverse gear is engaged. To delay the switch-back an

additional electronic part is required.

After market front camera The front camera will automatically be switched for 10 seconds after

disengaging the reverse gear. A manually front camera switching is possible by

external keypad.

1.2. Checking the compatibility of vehicle and accessories

1.3. connectors - video-interface

The video-interface (daughter PCB) converts the video signals of connected after-market

sources in a factory monitor compatible picture signal which is inserted in the factory

monitor, by using separate trigger options.

Version 23.06.2020 HW CAM(V98) / (V43) CI-UCON7-JEEP

Page5

1.4. connectors –daughter PCB

1.5. Dip-switch settings

1.5.1. 8 dip - black

Some settings have to be selected by the dip-switches on the

video interface.

Dip position down is ON and position up is OFF.

*The front camera will automatically be switched for 10 seconds after disengaging the

reverse gear.

Dip

Function

ON (down)

OFF (up)

Front camera

enabled*

disabled

Power supply

output

(red wire)

+12V (max. 3A) when reverse gear

is engaged incl. 10 seconds delay

and +12V by manual switching to

front camera by keypad

+12V (max. 3A) ACC

CVBS AV1-input

enabled

disabled

CVBS AV2-input

enabled

disabled

No function

Set to OFF

Rear-view cam type

after-market

factory or none

No function

Set to OFF

No function

Set to OFF

No function

Set to OFF

Version 23.06.2020 HW CAM(V98) / (V43) CI-UCON7-JEEP

Page6

1.5.1.1. Activating the front camera input (dip 1)

If set to ON, the interface switches for 10 seconds from the rear-view camera to the front

camera input after having disengaged the reverse gear. In addition, a manual switch-over to

the front camera input is possible via keypad (short press) from any image mode.

Description of the front camera power supply: see chapter “Power supply output”.

1.5.1.2. Enabling the interface’s video inputs (dip 2-3)

Only the enabled video inputs can be accessed when switching through the interface’s video

sources. It is recommended to enable only the required inputs, disabled inputs

will be skipped when switching through the video-interfaces inputs.

1.5.1.3. Rear-view camera setting (dip 5)

If set to OFF, the interface switches to factory picture while the reverse gear is engaged to

display factory rear-view camera.

If set to ON, the interface switches to its rear-view camera input „Camera-IN“ while the

reverse gear is engaged.

Note: Dips 4, 6, 7 and 8 are out of function and have to be set to OFF.

After each Dip-switch-change a power-reset of the Video Interface has to be performed!

1.5.2. 4 dip - red

By using the Dip-switches, the factory Head-unit or vehicle can be chosen

which the interface will be connected to.

Dip position down is ON and position up is OFF.

Set all dip switches to off

Vehicle/Navigation

Dip 1

Dip 2

Dip 3

Dip 4

All vehicles

OFF

Version 23.06.2020 HW CAM(V98) / (V43) CI-UCON7-JEEP

Page7

2. Installation

Switch off ignition and disconnect the vehicle’s battery! The interface needs a permanent

12V source. If according to factory rules disconnecting the battery is to be avoided, it is

usually sufficient to put the vehicle to “Sleep-Mode”. In case it does not succeed,

disconnect the battery with a resistor lead.

If power source is not taken directly from the battery, the connection has to be checked

for being start-up proven and permanent.

2.1. Place of installation

The video interface shell be installed behind the vehicle`s head unit, depending on offered space.

The daughter PCB shell be connected and installed inside the factory monitor.

Version 23.06.2020 HW CAM(V98) / (V43) CI-UCON7-JEEP

Page8

2.2. Connection schema

Version 23.06.2020 HW CAM(V98) / (V43) CI-UCON7-JEEP

Page9

2.3. Installation –ribbon cable into the monitor panel

Remove the factory monitor and open it`s housing. The daughter PCB is built to be installed

into the optical lead between the monitor panel and mainboard of the vehicles monitor.

Version 23.06.2020 HW CAM(V98) / (V43) CI-UCON7-JEEP

Page10

Indice

Altri manuali Car-Interface Accessori per automobili

Car-Interface

Car-Interface RL4-NAC08 Manuale utente

Car-Interface

Car-Interface CI-DAB-CAN1-SK Manuale utente

Car-Interface

Car-Interface CI-RL4-NAC12 Manuale utente

Car-Interface

Car-Interface RL4-MBN6 Manuale utente

Car-Interface

Car-Interface CI-RL4-MM-NP Manuale utente

Car-Interface

Car-Interface CI-RL3-MIB-TT Manuale utente

Car-Interface

Car-Interface TV-Free CI-TF-SC14 Manuale utente

Car-Interface

Car-Interface CI-DAB-MMI2G Guida all'installazione

Car-Interface

Car-Interface r.LiNK CI-RL2-RLINK Manuale utente

Car-Interface

Car-Interface RL4-MIB92 Manuale utente

Car-Interface

Car-Interface v.LOGiC V5-CIC-F-PNP Manuale utente

Car-Interface

Car-Interface TV-Free CI-TF-PCM30 Manuale utente

Car-Interface

Car-Interface CI-RL4-UCON12 Manuale utente

Car-Interface

Car-Interface CI-RL4-LR17 Manuale utente

Car-Interface

Car-Interface CI-RL4-NAC08 Manuale utente

Car-Interface

Car-Interface CI-VL2-CCC Manuale utente

Car-Interface

Car-Interface CI-C2-MK-AUX Manuale utente

Car-Interface

Car-Interface CI-AUX-110 Manuale utente

Car-Interface

Car-Interface TV-Free CI-TF-NTG3 Manuale utente

Car-Interface

Car-Interface CI-RL5-MIB-STD2 Manuale utente

Car-Interface

Car-Interface CI-C1-RNSE Manuale utente

Car-Interface

Car-Interface CI-RL2-MBN45 Manuale utente

Car-Interface

Car-Interface CI-VL7-SY2 Manuale utente

Car-Interface

Car-Interface CI-CARPLAY-MMI3G Manuale utente

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente