Car-Interface CI-RL4-UCON12 Manuale utente

Version 29.01.2021 HW: CAM(100)/(V11+V41) CI-RL4-UCON12

r.LiNK Video-inserter

CI-RL4-UCON12

Compatible with Chrysler, Dodge, Jeep vehicles with

Uconnect 4C NAV UAV and 8.4inch monitor

Uconnect NAV UAX und 12inch monitor

with separate head-unit

Video-inserter for front- and rear-view camera

and two additional video sources

Product features

Video-inserter for factory-infotainment systems

1 CVBS Input for rear-view camera

1 CVBS Input for front camera

2 CVBS video-inputs for after-market devices (e.g. USB-Player, DVB-T2 tuner)

Automatic switching to rear-view camera input on engagement of the reverse gear

Automatic front camera switching after reverse gear for 10 seconds

Video-in-motion (ONLY for connected video-sources)

Video-inputs NTSC and PAL compatible

Version 29.01.2021 HW: CAM(100)/(V11+V41) CI-RL4-UCON12

Page2

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Checking the compatibility of vehicle and accessories

1.3. Connectors –video interface

1.4. Dip switch settings

1.4.1. 8 dip –black

1.4.1.1. Activating the front camera input (dip 1)

1.4.1.2. Enabling the interface’s video inputs (dip 2-3)

1.4.1.3. Rear-view camera setting (dip 5)

1.4.1.4. Activating the interface PDC graphic (dip 6)

1.4.1.4. Monitor size (Dip 8)

1.4.2. 4 dip - red

2. Installation

2.1. Place of installation

2.2. Connection schema

2.3. Connection - picture signal cable

2.4. Connection –PNP Power / CAN cable

2.5. Analogue power supply

2.6. Power supply output

3. Connection –video sources

3.1. Audio insertion

3.2. After market front camera

3.3. After-market rear-view camera

3.3.1. Case 1: Interface receives the reverse gear signal

3.3.2. Case 2: Interface does not receive the reverse gear signal

3.4. Connection video-interface and keypad

3.5. Picture settings

4. Interface operation

5. Specifications

6. FAQ –Trouble Shooting-Interface functions

Version 29.01.2021 HW: CAM(100)/(V11+V41) CI-RL4-UCON12

Page3

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. Apart from using this

product in an unmoved vehicle, it should only be used to display fixed menus or rear-view-

camera video when the vehicle is moving (for example the MP3 menu for DVD upgrades).

Changes/updates of the vehicle’s software can cause malfunctions of the interface. Up to

one year after purchase we offer free software-updates for our interfaces. To receive a free

update, the interface has to be sent in at own cost. Wages for de-and reinstallation and

other expenditures involved with the software-updates will not be refunded.

1. Prior to installation

Please read the manual thoroughly BEFORE starting the installation. Technical knowledge is

imperatively required. The place of installation has to be free of moisture and away from

heat sources.

1.1. Delivery contents

Take down the serial number of the interface and store this manual for support

purposes: ____________________

Version 29.01.2021 HW: CAM(100)/(V11+V41) CI-RL4-UCON12

Page4

Compatibility

Brand

Compatible vehicles

Infotainment systems

Chrysler

Pacifica since model year 2018

Uconnect 4C NAV UAV infotainment

with 8.4inch monitor and separate

head-unit

Dodge

RAM since model year2019

Uconnect NAV UAX infotainment

with 12inch monitor

and separate head-unit

Jeep

Grand Cherokee since model year 2019

Uconnect 4C NAV UAV infotainment

with 8.4inch monitor and separate

head-unit

Limitations

Video only The interface inserts ONLY video signals into the infotainment.

For inserting Audio signals either the possibly existing factory

audio-AUX-input or a FM-modulator can be used.

In case that 2 AV sources shall be connected, a desired audio

switching will require additional electronic.

Factory rear-view camera Automatically switching-back from inserted video to factory rear-

view camera is only possible while the reverse gear is engaged. To

delay the switch-back an additional electronic part is required.

After market front camera The front camera will automatically be switched for 10 seconds

after disengaging the reverse gear. A manually front camera

switching is possible by external keypad.

PDC If the video interface does not receive the required information

from the vehicle CAN-bus, the optical PDC display will not be

supported.

1.2. Checking the compatibility of vehicle and accessories

Version 29.01.2021 HW: CAM(100)/(V11+V41) CI-RL4-UCON12

Page5

1.3. Connectors –video interface

The video-interface converts the video signals of connected after-market sources in a factory

monitor compatible picture signal which is inserted in the factory monitor, by using separate

trigger options. Further it reads the vehicle’s digital signals out of the vehicle’s CAN-bus and

converts them for the video interface.

Version 29.01.2021 HW: CAM(100)/(V11+V41) CI-RL4-UCON12

Page6

1.4. Dip-switch settings

1.4.1. 8 dip - black

Some settings have to be selected by the dip-switches on the

video interface.

Dip position down is ON and position up is OFF.

*The front camera will automatically be switched for 10 seconds after disengaging the

reverse gear.

After each Dip-switch-change a power-reset of the Video Interface has to be performed!

See the following chapters for detailed information.

Dip

Function

ON (down)

OFF (up)

Front camera

enabled*

disabled

Power supply

output

(red wire)

+12V (max. 3A) when reverse gear

is engaged incl. 10 seconds delay

and +12V by manual switching to

front camera by keypad

+12V (max. 3A) ACC

CVBS AV1-input

enabled

disabled

CVBS AV2-input

enabled

disabled

No function

set to OFF

Rear-view cam type

after-market

factory or none

PDC

enabled

disabled

No function

set to OFF

Monitor size

12inch monitor

8.4inch monitor

Version 29.01.2021 HW: CAM(100)/(V11+V41) CI-RL4-UCON12

Page7

1.4.1.1. Activating the front camera input (dip 1)

If set to ON, the interface switches for 10 seconds from the rear-view camera to the front

camera input after having disengaged the reverse gear. In addition, a manual switch-over to

the front camera input is possible via keypad (short press) from any image mode.

Description of the power supply output: see chapter “Power supply output”.

1.4.1.2. Enabling the interface’s video inputs V1 Left und V2 Right (dip 2-3)

Only the enabled video inputs can be accessed when switching through the interface’s video

sources. It is recommended to enable only the required inputs, disabled inputs

will be skipped when switching through the video-interfaces inputs.

1.4.1.3. Rear-view camera setting (dip 5)

If set to OFF, the interface switches to factory picture while the reverse gear is engaged to

display factory rear-view camera.

If set to ON, the interface switches to its rear-view camera input „V4 Reverse“ while the

reverse gear is engaged.

1.4.1.4. Activating the interface PDC graphic (Dip 6)

Dip 6 is used to display the interface PDC graphic as „picture in picture“ in combination with

the camera image.

1.4.1.5. Monitor selection (Dip 8)

Dip 8 is used to adjust the corresponding monitor size.

If set to ON, 12inch monitors are selected on the interface.

If set to OFF, 9inch monitors are selected on the interface.

Note: Dip4, 6 and 7 are out of function and have to be set to OFF.

After each Dip-switch-change a power-reset of the Video Interface has to be performed!

Version 29.01.2021 HW: CAM(100)/(V11+V41) CI-RL4-UCON12

Page8

1.4.2. 4 dip - red

By using the Dip-switches, the vehicle can be chosen which the interface

will be connected to.

For all vehicles, all 4 dip switches must be set to OFF.

After each Dip-switch-change a power-reset of the Video Interface has to be performed!

2. Installation

To install the interface, first switch off the ignition and disconnect the vehicle’s battery.

Please read the owner`s manual of the car, regarding the battery`s disconnection! If

required, enable the car`s Sleep-mode (hibernation mode)

In case the sleep-mode does not succeed, the disconnection of the battery can be done

with a resistor lead.

If the necessary stabilized power supply for the interface is not taken directly from the

battery, the chosen connection has to be checked for being constantly stabile.

The interface needs a permanent 12V source!

2.1. Place of installation

The interface is designated to be connected behind the vehicle`s head-unit.

Version 29.01.2021 HW: CAM(100)/(V11+V41) CI-RL4-UCON12

Page9

2.2. Connection schema

Version 29.01.2021 HW: CAM(100)/(V11+V41) CI-RL4-UCON12

Page10

2.3. Connection –picture signal cable

Connect the female picture signal cable’s WATERBLUE coloured HSD+2 connector to

the male WATERBLUE coloured HSD+2 connector of the video interface.

Disconnect the female 4pin HSD connector of the factory harness at the rear side of

the head-unit and connect it to the male PURPLE coloured HSD connector of the

enclosed picture cable.

Connect the female WATERBLUE coloured HSD connector of the enclosed picture

signal cable to the previously become free male HSD connector at the head-unit’s

rear side.

Caution: The picture signal cable has to be connected to the head-unit.

Connection to the head unit may cause damage to the system!

Note: No liability for vehicle wire colours and pin definition!

Changes by the vehicle manufacturer are possible. The given information has to be verified

by the installer.

Indice

Altri manuali Car-Interface Accessori per automobili

Car-Interface

Car-Interface CI-RL3-CIC Manuale utente

Car-Interface

Car-Interface CI-RL3-LR16-8 Manuale utente

Car-Interface

Car-Interface CI-RL4-SY3-R5 Manuale utente

Car-Interface

Car-Interface CI-RL4-UCON8-CP Manuale utente

Car-Interface

Car-Interface TV-Free CI-TF-PCM21 Manuale utente

Car-Interface

Car-Interface v.LiNK CI-VL2-CIC-F Manuale utente

Car-Interface

Car-Interface CI-CARPLAY-CIC Manuale utente

Car-Interface

Car-Interface CI-RL2-MBN45 Manuale utente

Car-Interface

Car-Interface r.LiNK CI-RL2-N900 Manuale utente

Car-Interface

Car-Interface v.LiNK CI-VL2-LR14-OPS Manuale utente

Car-Interface

Car-Interface TV-Free Manuale utente

Car-Interface

Car-Interface CI-VL2-124SPY Manuale utente

Car-Interface

Car-Interface CI-CARPLAY-NTG5 Manuale utente

Car-Interface

Car-Interface v.LINK VL2-MIB-3 Manuale utente

Car-Interface

Car-Interface CI-RL4-NAC08 Manuale utente

Car-Interface

Car-Interface TV-Free CI-TF-UCON22 Manuale utente

Car-Interface

Car-Interface CI-CARPLAY-NTG45 Manuale utente

Car-Interface

Car-Interface CI-AUX-110 Manuale utente

Car-Interface

Car-Interface CI-RL4-R40-E Manuale utente

Car-Interface

Car-Interface CI-UCON7-500 Manuale utente

Car-Interface

Car-Interface CI-VL2-CCC Manuale utente

Car-Interface

Car-Interface CI-RL4-MBN6 Manuale utente

Car-Interface

Car-Interface CI-VL7-SY2 Manuale utente

Car-Interface

Car-Interface TV-Free CI-TF-C20 Manuale utente

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente