Car-Interface CI-UCON5-JEEP Manuale utente
Version 26.10.2020 HW CAM(V98)/(V21)GD CI-UCON5-JEEP
r.LiNK Video-inserter
CI-UCON5-JEEP
Compatible with
Jeep vehicles
with Uconnect V2FRP infotainment
and 5inch monitor
Video-inserter for front- and rear-view camera
and two additional video sources
Product features
Video-inserter for factory-infotainment systems
1 CVBS Input for rear-view camera
1 CVBS Input for front camera
2 CVBS video-inputs for after-market devices (e.g. USB-Player, DVB-T2 tuner)
Automatic switching to rear-view camera input on engagement of the reverse gear
Automatic front camera switching after reverse gear for 10 seconds
Video-in-motion (ONLY for connected video-sources)
Video-inputs NTSC compatible
Version 26.10.2020 HW CAM(V98)/(V21)GD CI-UCON5-JEEP
Page2
Contents
1. Prior to installation
1.1. Delivery contents
1.2. Checking the interface compatibility of vehicle and accessories
1.3. Connectors
1.3.1. Connectors –video interface
1.3.2. Connectors - daughter PCB)
1.4. Dip-switch settings
1.4.1. 8 dip –black
1.4.1.1. Activating the front camera input (dip 1)
1.4.1.2. Enabling the interface’s video inputs (dip 2-3)
1.4.1.3. Rear-view camera setting (dip 5)
1.4.2. 4 dip - red
2. Installation
2.1. Place of installation
2.2. Connection scheme
2.3. Installation - Ribbon cables into the monitor panel
2.3.1. Warning notes, concerning the installation of ribbon cables
2.4. Installation –daughter PCB
2.5. Connection - picture signal cable
2.6. Connection –10pin Power cable
2.7. Power supply
2.8. Power supply output
2.9. Connection –video inputs
2.9.1. Audio insertion
2.9.2. After-market front camera
2.9.3. After-market rear-view camera
2.10. Connection –external keypad
3. Interface operation by external keypad
4. Picture settings
5. Specifications
6. Frequently asked questions
Version 26.10.2020 HW CAM(V98)/(V21)GD CI-UCON5-JEEP
Page3
Legal Information
By law, watching moving pictures while driving is prohibited, the driver must not be
distracted. We do not accept any liability for material damage or personal injury resulting,
directly or indirectly, from installation or operation of this product. This product should only
be used while standing or to display fixed menus or rear-view-camera video when the
vehicle is moving, for example the MP3 menu for DVD upgrades.
Changes/updates of the vehicle’s software can cause malfunctions of the interface. We
offer free software-updates for our interfaces for one year after purchase. To receive a free
update, the interface must be sent in at own cost. Labour cost for and other expenses
involved with the software-updates will not be refunded.
1. Prior to installation
Read the manual prior to installation.
Technical knowledge is necessary for installation. The place of installation must be free of
moisture and away from heat sources.
1.1. Delivery contents
Version 26.10.2020 HW CAM(V98)/(V21)GD CI-UCON5-JEEP
Page4
Requirements
Brand
Compatible vehicles
Compatible systems
Jeep
Compass since model year 2017
Uconnect V2RFP with 5inch Monitor
without DIN-shell behind front-panel
Limitations
Video only The interface inserts ONLY video signals into the infotainment.
For inserting Audio signals either the possibly existing factory audio-AUX-
input or a FM-modulator can be used.
In case that 2 AV sources shall be connected, a desired audio switching will
require additional electronic.
Factory rear-view camera Automatically switching-back from inserted video to factory rear-view camera
is only possible while the reverse gear is engaged. To delay the switch-back an
additional electronic part is required.
After market front camera The front camera will automatically be switched for 10 seconds after
disengaging the reverse gear. A manually front camera switching is possible
by external keypad.
Video input signal Only compatible to NTSC video sources.
1.2. Checking the compatibility of vehicle and accessories
1.3. Connectors
1.3.1. Connectors - video-interface
The video-interface converts the video signals of connected after-market sources in a factory
monitor compatible picture signal which is inserted in the factory monitor, by using separate
trigger options.
Version 26.10.2020 HW CAM(V98)/(V21)GD CI-UCON5-JEEP
Page5
1.3.2. connectors –daughter PCB
Version 26.10.2020 HW CAM(V98)/(V21)GD CI-UCON5-JEEP
Page6
1.4. Dip-switch settings
1.4.1. 8 dip - black
Some settings have to be selected by the dip-switches on the
video interface.
Dip position down is ON and position up is OFF.
*The front camera will automatically be switched for 10 seconds after disengaging the
reverse gear.
See the following chapters for detailed information.
Dip
Function
ON (down)
OFF (up)
1
Front camera
enabled*
disabled
Power supply
output
(red wire)
+12V (max. 3A) when reverse gear
is engaged incl. 10 seconds delay
and +12V by manual switching to
front camera by keypad
+12V (max. 3A) ACC
2
CVBS AV1-input
enabled
disabled
3
CVBS AV2-input
enabled
disabled
4
No function
Set to OFF
5
Rear-view cam type
after-market
factory or none
6
No function
Set to OFF
7
No function
Set to OFF
8
No function
Set to OFF
Version 26.10.2020 HW CAM(V98)/(V21)GD CI-UCON5-JEEP
Page7
1.4.1.1. Activating the front camera input (dip 1)
If set to ON, the interface switches for 10 seconds from the rear-view camera to the front
camera input after having disengaged the reverse gear. In addition, a manual switch-over to
the front camera input is possible via keypad (short press) from any image mode.
Description of the power supply output: see chapter “Power supply output”.
1.4.1.2. Enabling the interface’s video inputs (dip 2-3)
Only the enabled video inputs can be accessed when switching through the interface’s video
sources. It is recommended to enable only the required inputs, disabled inputs
will be skipped when switching through the video-interfaces inputs.
1.4.1.3. Rear-view camera setting (dip 5)
If set to OFF, the interface switches to factory picture while the reverse gear is engaged to
display factory rear-view camera.
If set to ON, the interface switches to its rear-view camera input „Camera-IN“ while the
reverse gear is engaged.
Note: Dips 4, 6, 7 and 8 are out of function and have to be set to OFF.
After each Dip-switch-change a power-reset of the Video Interface has to be performed!
1.4.2. 4 dip - red
By using the Dip-switches, the factory Head-unit or vehicle can be
chosen which the interface will be connected to.
Dip position down is ON and position up is OFF.
Set all dip switches to off
Vehicle/Navigation
Dip 1
Dip 2
Dip 3
Dip 4
All vehicles
OFF
OFF
OFF
OFF
Version 26.10.2020 HW CAM(V98)/(V21)GD CI-UCON5-JEEP
Page8
2. Installation
To install the interface, first switch off the ignition and disconnect the vehicle’s battery.
Please read the owner`s manual of the car, regarding the battery`s disconnection! If
required, enable the car`s Sleep-mode (hibernation mode)
In case the sleep-mode does not succeed, the disconnection of the battery can be done
with a resistor lead.
If the necessary stabilized power supply for the interface is not taken directly from the
battery, the chosen connection has to be checked for being constantly stabile.
The interface needs a permanent 12V source!
2.1. Place of installation
The video interface is designated to be connected behind the vehicle`s head unit.
The daughter PCB shell be installed and connected inside the factory head unit behind the
monitor panel.
Version 26.10.2020 HW CAM(V98)/(V21)GD CI-UCON5-JEEP
Page9
2.2. Connection Scheme
Version 26.10.2020 HW CAM(V98)/(V21)GD CI-UCON5-JEEP
Page10
2.3. Installation - ribbon cables into the monitor panel
Remove the factory monitor and open it`s housing. The daughter PCB is built to be installed into the
optical lead between the monitor panel and mainboard of the vehicles monitor.
Unscrew the housing screws shown in the picture and remove the back of the housing.
Remove the board underneath and put it aside.
Unscrew the 5 screws and remove the sheet metal part underneath.
Attention: It may be necessary to disconnect a small antenna cable from the board!
Indice
Altri manuali Car-Interface Accessori per automobili
Car-Interface
Car-Interface CI-CARPLAY-MMI3G Manuale utente
Car-Interface
Car-Interface CI-C2-MK-AUX Manuale utente
Car-Interface
Car-Interface CI-VL2-MIB-3 Manuale utente
Car-Interface
Car-Interface CI-CARPLAY-NTG5 Manuale utente
Car-Interface
Car-Interface CI-CARPLAY-CIC Manuale utente
Car-Interface
Car-Interface RL4-MM-NP Manuale utente
Car-Interface
Car-Interface v.LiNK CI-VL2-CIC-F Manuale utente
Car-Interface
Car-Interface CI-RL2-MZD Manuale utente
Car-Interface
Car-Interface CI-VL2-CCC Manuale utente
Car-Interface
Car-Interface TV-Free CI-TF-PCM30 Manuale utente
Car-Interface
Car-Interface CI-UCON7-500 Manuale utente
Car-Interface
Car-Interface CI-CARPLAY-NTG45 Manuale utente
Car-Interface
Car-Interface CI-RL4-MIB100 Manuale utente
Car-Interface
Car-Interface CI-RL4-LR17 Manuale utente
Car-Interface
Car-Interface CI-RL4-NAC12 Manuale utente
Car-Interface
Car-Interface c.LOGiC lite CI-C1-CCC Manuale utente
Car-Interface
Car-Interface CI-VL2-124SPY Manuale utente
Car-Interface
Car-Interface v.LiNK CI-VL2-PC-HSD Manuale utente
Car-Interface
Car-Interface RL4-MBN6 Manuale utente
Car-Interface
Car-Interface CI-RL3-MIB-TT Manuale utente
