Car-Interface CI-C2-MK-AUX Manuale utente
Version 20.09.2017 CI-C2-MK-AUX
c.LOGiC Interface
CI-C2-MK-AUX
Compatible with BMW Professional navigation
systems
without iDrive (MK2-MK4)
Product features
• Full plug and play multimedia interface
• 2 AV-inputs with separate IR-control channels
• control of after-market devices, e.g. DVB-T tuner, DVD-player, DVD-changer, …
• after-market rear-view camera input (optional adapter is necessary)
• automatic switching to after-market rear-view camera input
• rear-view camera power (+12V max. 1A)
• Rear-seat-entertainment video-output for Video-sources connected to the c.LOGiC
• power-on remote-out trigger-signal (+12V max. 1A) to switch on connected devices
• video-in-motion
Version 20.09.2017 CI-C2-MK-AUX
Page1
Contents
1. Prior to Installation
1.1. Delivery contents
1.2. Check compatibility of vehicle and accessories
2. Connection schema
3. Installation
3.1. Interconnecting interface-box and harnesses
3.2. Connections to the navigation computer or –if existing –to the TV-tuner
3.3. Connections to radio module
3.4. Connecting peripheral devices
3.4.1. AV-source(s)
3.4.2. Installing AV-source’s IR-sensor additionally
3.4.3. After-market rear-view camera
3.4.4. After-market rear-seat-entertainment
3.5. System settings/VI SETTINGS
3.5.1. Audio settings
3.5.2. Assigning device control for connected AV-source
3.5.3. Rear-view camera function
3.6. DIP switch settings
4. Operation
4.1. Activation of the video-in-motion function
4.2. Selecting the c.LOGiC as current AV-source
4.3. Switching to AV1 and AV2
4.4. Picture settings
4.5. Button assignment table
5. Specifications
Appendix A –Device control table
Version 20.09.2017 CI-C2-MK-AUX
Page2
Legal Information
By law, watching moving pictures while driving is prohibited, the driver must not be
distracted. We do not accept any liability for material damage or personal injury resulting,
directly or indirectly, from installation or operation of this product. This product should only
be used while standing or to display fixed menus or rear-view-camera video when the
vehicle is moving, for example the MP3 menu for DVD upgrades.
Changes/updates of the vehicle’s software can cause malfunctions of the interface. We
offer free software-updates for our interfaces for one year after purchase. To receive a free
update, the interface must be sent in at own cost. Labor cost for and other expenses
involved with the software-updates will not be refunded.
1. Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for installation. The
place of installation must be free of moisture and away from heat sources.
1.1. Delivery contents
If remote function for a peripheral device shall be used, additional an IR-
Remote cable and Y-adapter are needed, see chapter AV-source(s) .
Take down the SW-version and HW-version of the interface boxes, and store this
manual for support purposes.
Interface-box
C2C-M700
HW_____ SW_____
Harness
C3C-BM700
Version 20.09.2017 CI-C2-MK-AUX
Page3
1.2. Check compatibility of vehicle and accessories
Requirements
Vehicle 3series (E46), 5series (E39), 7series (E38), X5 (E53), X3 (E83), Z4
(E85/86)
with AUX-input at the radio module (from approx 10/2002)
Navigation Navigation system Professional without iDrive
(MK2-MK4)
Limitations
Factory-audio-AUX-input The factory audio-AUX-input is used for audio-insertion by the
c.LOGiC. Alternative use of the AUX-input is only possible by
additional switch-box integration.
After-market rear-view Compatible with NTSC-cameras only.
camera
Version 20.09.2017 CI-C2-MK-AUX
Page4
2. Connection schema
Version 20.09.2017 CI-C2-MK-AUX
Page5
3. Installation
Switch off ignition and disconnect the vehicle’s battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
Place of installation is at the navigation computer or the factory TV-tuner (if existing and not
removed) and at the radio module.
If there is a factory TV-tuner inside the car, you have to connect the harness C3C-BM700 to
the TV-tuner and not to the navigation computer!
The radio module and navigation computer are located at the rear end for the 3series (E46),
5series (E39) and 7series (E38) on the left hand side the radio module of the 7series is
located behind lining in the car wing).
The X5 (E53) radio module is located underneath the
boot lining, next to the battery.
The navigation computer is located on the left hand side
behind the boot lining.
Version 20.09.2017 CI-C2-MK-AUX
Page6
3.1. Interconnecting interface-box and harnesses
Plug harness C3C-BM700 into 14pin of interface-box C2C-M700.
Plug female 18pin AMP connector of C3C-BM700 into male 18pin AMP connector of
interface-box C2C-M700.
Version 20.09.2017 CI-C2-MK-AUX
Page7
3.2. Connections to the navigation computer or –if existing –to the TV-tuner
If there is a factory TV-tuner inside the car, you have to connect the harness C3C-BM700 to
the TV-tuner and not to the navigation computer!
Disconnect blue female 18pin connector of vehicle harness from the back of the
navigation computer or the factory TV-tuner (if existing and not removed).
Plug blue male 18pin AMP connector of harness C3C-BM700 into blue female 18pin
AMP connector of vehicle harness.
Plug blue female 18pin AMP connector of harness C3C-BM700 into blue male 18pin
AMP connector of navigation computer or of the factory TV-tuner (if existing and not
removed).
Note: If an existing factory TV-tuner will be removed the optionally available harness CAB-
BMW200 is necessary!
Version 20.09.2017 CI-C2-MK-AUX
Page8
3.3. Connections to radio module
Loosen the female Quadlock connector to the radio module.
Loosen the black female 12pin connector from chamber B
of the female Quadlock connector.
Push the insert from female 12pin connector’s plastic cab
from the side.
Pin the audio cables of harness C3C-BM700 to the
dissambled vehicle’s female 12pin connector:
Yellow cable Pin 3
Blue cable Pin 4
Black cable Pin 10
If the chambers of the female 12pin connector are occupied,
isolate and remove the existing pins.
Push the black plastic cap onto the female 12pin connector
and insert it into the female Quadlock connector. Reconnect
the female Quadlock connector to the radio module.
Vehicle female
12pin connector
Vehicle female
12pin connector
Vehicle female
12pin connector
Quadlock Steckplatz
Radiomodul
Version 20.09.2017 CI-C2-MK-AUX
Page9
3.4. Connecting peripheral devices
It is possible to connect up to 2 after-market AV-sources, after-market rear-view camera and
rear-seat-entertainment to the c.LOGiC.
Before final installation of the peripheral devices, we recommend to test-run the c.LOGiC
functions to detect incompatibility of vehicle, navigation, factory accessories or peripheral
devices as soon as possible.
3.4.1. AV-source(s)
The c.LOGiC interface has the possibility to connect and remotely control by navigation
buttons up to 2 pre-programmed devices. The device list in the device control table shows
the pre-programmed remote channels and the related IR-remote cables STA-xxx which must
be ordered separately for the control of the device.
Indice
Altri manuali Car-Interface Accessori per automobili
Car-Interface
Car-Interface TV-Free CI-TF-SC14 Manuale utente
Car-Interface
Car-Interface CI-VL3-MBN51 Manuale utente
Car-Interface
Car-Interface CI-RL4-MZD88 Manuale utente
Car-Interface
Car-Interface CI-VL7-SY2 Manuale utente
Car-Interface
Car-Interface TV-Free CI-TF-NTG3 Manuale utente
Car-Interface
Car-Interface CI-RL3-C3D Manuale utente
Car-Interface
Car-Interface CI-CARPLAY-CIC Manuale utente
Car-Interface
Car-Interface CI-RL3-LR16-8 Manuale utente
Car-Interface
Car-Interface CI-CARPLAY-NTG45 Manuale utente
Car-Interface
Car-Interface TV-Free TF-NTG1 Manuale utente
Car-Interface
Car-Interface CI-RL2-SC14 Manuale utente
Car-Interface
Car-Interface v.LOGiC V5-CIC-F-PNP Manuale utente
Car-Interface
Car-Interface CI-DAB-MMI2G Guida all'installazione
Car-Interface
Car-Interface TV-Free CI-TF-FSYNC54 Manuale utente
Car-Interface
Car-Interface TV-Free CI-TF-PCM30 Manuale utente
Car-Interface
Car-Interface CI-VL2-MIB-3 Manuale utente
Car-Interface
Car-Interface TV-Free CI-TF-PCM21 Manuale utente
Car-Interface
Car-Interface CI-RL3-CIC Manuale utente
Car-Interface
Car-Interface CI-RL4-MIB92 Manuale utente
Car-Interface
Car-Interface CI-C1-RNSE Manuale utente
