Car-Interface CI-RL2-MZD Manuale utente

Version 03.05.2019 HW: CAM(V31)/(V22) CI-RL2-MTC

v.LiNK Video-inserter

CI-RL2-MZD

Compatible with

MAZDA vehicles

with MZD Connect infotainment and 7inch monitor

Video-inserter for rear-view camera

and two additional video sources

Product features

Video-inserter for factory-infotainment systems

2 CVBS video-inputs for after-market devices (e.g. USB-player, DVB-T2 tuner)

Rear-view camera CVBS video-input

Automatic switching to rear-view camera input on engagement of the reverse gear

Video-in-motion (ONLY for connected video-sources)

Video-inputs PAL/NTSC compatible

Version 03.05.2019 HW: CAM(V31)/(V22) CI-RL2-MTC

Page2

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Checking the compatibility of vehicle and accessories

1.3. Boxes and connectors

1.3.1. Video-Interface

1.3.2. Dip-switch settings –interface

1.3.2.1. Enabling the interface’s video inputs (dip 2-3)

1.3.2.2. Rear-view camera setting (dip 5)

2. Installation

2.1. Place of installation

2.2. Connection schema

2.3. Connection - video-interface and Power/CAN

2.4. Connection –picture signal cable

2.5. Connection –Filter and fuse box

2.6. Connection –video sources

2.7. After-market rear-view camera

2.8. Connection –video interface and external keypad

2.9. Picture settings

3. Video interface operation

3.1. By infotainment button

3.2. By external keypad

3.3. By white wire of the 6pin cable

4. Specifications

5. FAQ –Trouble Shooting-Interface functions

Version 03.05.2019 HW: CAM(V31)/(V22) CI-RL2-MTC

Page3

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. Apart from using this

product in an unmoved vehicle, it should only be used to display fixed menus or rear-view-

camera video when the vehicle is moving (for example the MP3 menu for DVD upgrades).

Changes/updates of the vehicle’s software can cause malfunctions of the interface. Up to

one year after purchase we offer free software-updates for our interfaces. To receive a free

update, the interface has to be sent in at own cost. Wages for de-and reinstallation and

other expenditures involved with the software-updates will not be refunded.

No liability for vehicle wire colours and pin definition!

Changes by the vehicle manufacturer are possible. The given information has to be verified

by the installer.

1. Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The

place of installation must be free of moisture and away from heat sources.

1.1. Delivery contents

Take down the serial number of the interface and store this manual for support

purposes: ____________________

Version 03.05.2019 HW: CAM(V31)/(V22) CI-RL2-MTC

Page4

Requirements

Brand

Compatible vehicles

Compatible systems

Mazda

2,3,5,6,8

Biante

CX-5

CX-9

MX-5

MZD Connect infotainment

with 7inch monitor

Limitations:

Video only The interface inserts ONLY video signals into the infotainment. For inserting

Audio signals either the possibly existing factory audio-AUX-input or a FM-

modulator can be used. If 2 audio sources shall be connected to the infotainment,

an additional electronic is necessary to switch them.

Factory rear-view camera Automatically switching-back from inserted video to factory rear-view camera is

only possible while the reverse gear is engaged. To delay the switch-back an

additional electronic part is required.

1.2. Checking the compatibility of vehicle and accessories

1.3. Boxes and connectors

1.3.1. Video Interface

The video-interface converts the video signals of connected after-market sources in a factory

monitor compatible picture signal which is inserted in the factory monitor, by using separate

trigger options. Further it reads the vehicle’s digital signals out of the vehicle’s CAN-bus and

converts them for the video interface.

Version 03.05.2019 HW: CAM(V31)/(V22) CI-RL2-MTC

Page5

1.3.2. Dip-switch settings –interface

Some settings have to be selected by the dip-switches on the

video interface. Dip position down is ON and position up is OFF.

In case of a non-optimal displayed picture with the mentioned dip setting of dip8, we

recommend to try the other dip switch position.

After each Dip-switch-change a power-reset of the Can-box has to be performed!

See the following chapters for detailed information.

1.3.2.1. Enabling the interface’s video inputs (dip 2-3)

Only the enabled video inputs can be accessed by switching through the interface’s video

sources. It is recommended to enable only the required inputs, because the disabled inputs

will be skipped while switching through the video interfaces inputs.

1.3.2.2. Rear-view camera setting (dip 5)

If set to OFF, the interface switches to factory LVDS picture while the reverse gear is engaged

to display factory rear-view camera or factory optical park system picture.

If set to ON, the interface switches to its rear-view camera input while the reverse gear is

engaged.

Note: Dip 1, 4, 6, 7 and 8 are out of function and have to be set to OFF.

Dip

Function

ON (down)

OFF (up)

No function

set to OFF

CVBS AV1-input

enabled

disabled

CVBS AV2-input

enabled

disabled

No function

set to OFF

Rear-view cam type

after-market

factory or none

No function

set to OFF

No function

set to OFF

No function

set to OFF

Version 03.05.2019 HW: CAM(V31)/(V22) CI-RL2-MTC

Page6

2. Installation

To install the interface, first switch off the ignition and disconnect the vehicle’s battery.

Please read the owner`s manual of the car, regarding the battery`s disconnection! If

required, enable the car`s Sleep-mode (hibernation mode)

In case the sleep-mode does not succeed, the disconnection of the battery can be done

with a resistor lead.

If the necessary stabilized power supply for the interface is not taken directly from the

battery, the chosen connection has to be checked for being constantly stabile.

The interface needs a permanent 12V source!

2.1. Place of installation

The interface box is prepared to be connected behind the vehicle`s monitor and head-unit.

Both parts have to be removed for the installation

Version 03.05.2019 HW: CAM(V31)/(V22) CI-RL2-MTC

Page7

2.2. Connection schema

Version 03.05.2019 HW: CAM(V31)/(V22) CI-RL2-MTC

Page8

2.3. Connection - video-interface and Power / CAN

Connect the 6pin cable’s white female 6pin pin connector to the male 6pin connector

of the video interface.

Connect the 6pin cable’s yellow coloured wire “TO ACC” to ACC terminal15 or

S-contact terminal 86s.

Disconnect the female 28pin connector of the factory harness at the rear-side of the

head unit and connect it to the 28pin PNP cable’s male 28pin connector.

Connect the 28pin PNP cable’s opposite female 28pin connector to the previously

become free male 28pin connector at the rear-side of the head unit.

Version 03.05.2019 HW: CAM(V31)/(V22) CI-RL2-MTC

Page9

2.4. Connection - picture signal cable

Connect the enclosed picture signal cable’s female waterblue coloured HSD+2

connector to the male waterblue coloured HSD+2 connector of the video interface.

Disconnect the factory picture signal cable’s female 4pin connector at the rear side of

the factory monitor and connect it to the black male 4pin connector of the enclosed

picture signal cable.

Connect the picture signal cable’s darkgrey coloured female 4pin connector to the

previously become free male 4pin connector at the rear side of the factory monitor.

Version 03.05.2019 HW: CAM(V31)/(V22) CI-RL2-MTC

Page10

2.5. Connection –Filter and fuse box

Connect the filter and fuse box cable’s small female 8pin connector to the male 8pin

connector of the video interface.

Disconnect the factory cable’s female 8pin connector at the rear-side of the factory

monitor and connect it to the filter and fuse box cable’s male 8pin connector.

Connect the filter and fuse box cable’s opposite female 8pin connector to the previously

become free male 8pin connector at the rear-side of the factory monitor.

Indice

Altri manuali Car-Interface Accessori per automobili

Car-Interface

Car-Interface CI-RL3-C3D Manuale utente

Car-Interface

Car-Interface TV-Free CI-TF-C25 Manuale utente

Car-Interface

Car-Interface CI-RL-PCM3-TF Manuale utente

Car-Interface

Car-Interface CI-RL4-R40-E Manuale utente

Car-Interface

Car-Interface TV-Free CI-TF-C20 Manuale utente

Car-Interface

Car-Interface CI-RL4-UCON8-CP Manuale utente

Car-Interface

Car-Interface CI-AUX-110 Manuale utente

Car-Interface

Car-Interface CI-RL3-CIC Manuale utente

Car-Interface

Car-Interface CI-RL2-MTC Manuale utente

Car-Interface

Car-Interface CI-RL2-SC14 Manuale utente

Car-Interface

Car-Interface CI-VL7-SY2 Manuale utente

Car-Interface

Car-Interface CI-RL4-MM-NP Manuale utente

Car-Interface

Car-Interface CI-CARPLAY-NTG45 Manuale utente

Car-Interface

Car-Interface CI-VL2-124SPY Manuale utente

Car-Interface

Car-Interface v.LiNK CI-VL2-CIC-F Manuale utente

Car-Interface

Car-Interface CI-RL4-LR17 Manuale utente

Car-Interface

Car-Interface r.LiNK CI-RL2-RLINK Manuale utente

Car-Interface

Car-Interface CI-RL3-MIB-TT-LA Manuale utente

Car-Interface

Car-Interface CI-RL4-NAC08 Manuale utente

Car-Interface

Car-Interface TV-Free CI-TF-UCON22 Manuale utente

Car-Interface

Car-Interface TV-Free Manuale utente

Car-Interface

Car-Interface RL4-MM-R Manuale utente

Car-Interface

Car-Interface v.LOGiC V5-CIC-F-PNP Manuale utente

Car-Interface

Car-Interface CI-RL4-MBN6 Manuale utente

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente