Car-Interface CI-AUX-110 Manuale utente

Version 07.12.2015

AUX-In Interface

CI-AUX-110

Compatible with:

Audi MMI3G basic/high

BMW Professional radio, Business and

Professional navigation systems (CCC, CIC)

with iDrive,

Mercedes Benz Audio5, Audio20, APS50,

Comand APS NTG1/NTG2,

Porsche PCM 2.0 and 2.1

Version 07.12.2015 CI-AUX-110

Page1

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Check compatibility of vehicle and accessories

2. Installation

2.1. Selection of vehicle (blue wire)

2.2. Installation example Audi MMI 2G

2.3. Installation example Porsche Cayenne PCM2.1

2.4. Exception: Vehicles without optical lead components BMW

2.5. Exception: Vehicles without optical lead components Mercedes/Porsche

3. Operation

4. Specifications

Information

Changes/updates of the vehicle’s software can cause malfunctions of the interface. We

offer free software-updates for our interfaces for one year after purchase. To receive a free

update, the interface must be sent in at own cost. Labor cost for and other expenses

involved with the software-updates will not be refunded.

Version 07.12.2015 CI-AUX-110

Page2

Requirements

Navigation/Radio Audi MMI 3G basic/high (not A1!)

BMW Professional radio, Business and Professional navigation

systems (CCC, CIC) with iDrive

Mercedes Audio5, Audio20, APS50, Comand APS NTG1/NTG2

Porsche PCM2.0, PCM2.1

Limitations

Factory CD-changer A existing factory CD-changers must be removed.

BMW without If factory CD-changer has never been installed, the head-unit

MOST®-components needs to be coded to CD-changer by diagnosis computer or

OBD-xxx-CD-xx activator.

Mercedes/Porsche without MOST®-ring needs to be activated by diagnosis computer

MOST®-components

1. Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The

place of installation must be free of moisture and away from heat sources.

1.1. Delivery contents

1.2. Check compatibility of vehicle and accessories

AUX-110 HW_____ SW_____

Take down the SW-version and HW-version of the interface boxes,

and store this manual for support purposes.

Version 07.12.2015 CI-AUX-110

Page3

2. Installation

Switch off ignition and disconnect the vehicle’s battery!

The interface needs a permanent 12V source. If power source is not taken directly from

the battery, the connection has to be checked for being start-up proven and permanent.

Installation on BMW or Mercedes analogue to installation examples of Audi and Porsche.

2.1. Vehicle selection (blue wire)

For installation on Audi, Mercedes or Porsche, blue wire is not connected and needs to be

isolated.

For installation on BMW connect blue wire constantly to ground (GND).

2.2. Installation example Audi MMI 3G

Remove MOST®-connector and integrate Interface

according to schema. Obey arrows one the MOST®

-connectors as well as the order of components.

Connect black wire to ground and red wire to

permanent +12V. Isolate blue wire.

2.3. Installation example Porsche Cayenne PCM 2.1

Black wire Red wire

GND +12V permanent

Version 07.12.2015 CI-AUX-110

Page4

Remove plastic cover.

Remove 4 torx screws and pull out head-unit from the

dash-board.

Remove MOST®-connector from the rear of the

factory CD changer and integrate Interface according

to schema. Obey arrows one the MOST®-connectors.

Connect black wire to ground and red wire to

permanent +12V. Isolate blue wire.

2.4. Exception: Vehicles without optical lead components BMW

Vehicles without MOST®-components, which means without factory CDC, without factory

phone or other MOST®-components have optical leads at the navigation computer, but it

can be possible that the optical ring is not closed at the diagnostic connector in the glove

compartment. In this case a connector bridge for optical wires is necessary.

2.5. Exception: Vehicles without optical lead components Mercedes/Porsche

The MOST®-ring (optical) needs to be opened/activated by diagnosis computer.

3. Operation

Version 07.12.2015 CI-AUX-110

Page5

The AUX-110 emulates a factory CD-changer and is recognized as such by the head-unit. The

AUX-input is activated by playing CD1 on the head-unit.

4. Specifications

Operation voltage 10.5 –14.8V

Stand-by power drain <1mA

Operation power drain 120mA

Power consumption 1.8W

Temperature range -30°C bis +80°C

Weight 95g

Measurements (box only) B x H x T 106 x 30 x 71 mm

Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered

trademarks ® of their corresponding legal owners.

Indice

Altri manuali Car-Interface Accessori per automobili

Car-Interface

Car-Interface CI-CARPLAY-MMI3G Manuale utente

Car-Interface

Car-Interface CI-UCON5N Manuale utente

Car-Interface

Car-Interface CI-RL2-MZD Manuale utente

Car-Interface

Car-Interface RL4-MIB92 Manuale utente

Car-Interface

Car-Interface r.LiNK CI-RL2-RLINK Manuale utente

Car-Interface

Car-Interface CI-VL2-124SPY Manuale utente

Car-Interface

Car-Interface CI-RL4-NAC08 Manuale utente

Car-Interface

Car-Interface CI-RL3-C3D Manuale utente

Car-Interface

Car-Interface CI-CARPLAY-CIC Manuale utente

Car-Interface

Car-Interface TV-Free Manuale utente

Car-Interface

Car-Interface CI-RL2-MBN45 Manuale utente

Car-Interface

Car-Interface c.LOGiC CI-C2-MK-CD Manuale utente

Car-Interface

Car-Interface CI-RL4-MIB92 Manuale utente

Car-Interface

Car-Interface CI-RL5-MIB-STD2 Manuale utente

Car-Interface

Car-Interface v.LiNK CI-VL2-CIC-F Manuale utente

Car-Interface

Car-Interface CI-UCON5-JEEP Manuale utente

Car-Interface

Car-Interface CI-V5-CIC-F-PNP Manuale utente

Car-Interface

Car-Interface TV-Free TF-NTG1 Manuale utente

Car-Interface

Car-Interface CI-RL3-MIB-TT Manuale utente

Car-Interface

Car-Interface CI-VL7-SY2 Manuale utente

Car-Interface

Car-Interface CI-RL4-MZD88 Manuale utente

Car-Interface

Car-Interface CI-RL3-MIB-TT-LA Manuale utente

Car-Interface

Car-Interface CI-C2-MK-AUX Manuale utente

Car-Interface

Car-Interface v.LINK VL2-MIB-3 Manuale utente

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente