Caraudio-Systems V5-CIC-E Manuale utente

Version 01.12.2015 V5-CIC-E

v.LOGiC Intelligent Solution

Interface

V5-CIC-E

compatible with the E-series BMW and Mini with

navigation system or radio and 6.5” or 8.8”

monitor with 4pin HSD LVDS connector

Version 01.12.2015 V5-CIC-E

Page1

Product features

Own on-screen display and setup

Rear-view camera input

Automatic switching to rear-view camera input on engagement of reverse gear from

all operation modes

Front camera input

Manual switching to rear-view camera (only for vehicles with PDC button)

Manual return from rear-view and front camera (cancellation of automatic switching)

2 trigger outputs (+12V max. 1A), separately adjustable switching events (CAN, ACC,

camera, reverse gear)

Picture-in-picture mode combining after-market rear-view and front camera

picture(s) with factory parking sensor graphics

Compatible with all factory video accessories (e.g. rear-view camera, Top-View,

nightvison, DVD-changer, TV-tuner)

USB update-port for software-updates by consumer

Version 01.12.2015 V5-CIC-E

Page2

Contents

1. Prior to Installation

1.1. Delivery contents

1.2. Check compatibility of vehicle and accessories

1.3. Setting the dip switches of the interface-box V5C-M636

1.4. LED’s of the interface-box V5C-M636

2. Connection schema

3. Installation

3.1. Connecting interface-box and harnesses

3.2. LVDS connection

3.2.1. After-market front camera

3.2.1.1. Connection to the after-market front camera

3.2.1.2. Settings for connecting an after-market front camera

3.2.2. After-market rear-view camera

3.2.2.1. Connection to the after-market rear-view camera

3.2.2.2. Settings for connecting an after-market rear-view camera

3.2.3. After-market navigation

3.2.4. Configurable trigger outputs

3.3. Picture settings

4. Operation

4.1. OSD –On-screen display

4.1.1. OSD –Operation

4.1.1.1. 8-button iDrive

4.1.1.2. 2-button iDrive in Mini

4.1.2. OSD –Additional setting options

4.2. Video-in-motion function

4.3. Selecting the interface as current video source

5. Specifications

6. Connections (interface-box)

7. Technical support

Version 01.12.2015 V5-CIC-E

Page3

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. This product should only

be used while standing or to display fixed menus or rear-view-camera video when the

vehicle is moving, for example the MP3 menu for DVD upgrades.

Changes/updates of the vehicle’s software can cause malfunctions of the interface. We

offer free software-updates for our interfaces for one year after purchase. To receive a free

update, the interface must be sent in at own cost. Labor cost for and other expenses

involved with the software-updates will not be refunded.

Version 01.12.2015 V5-CIC-E

Page4

1. Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The

place of installation must be free of moisture and away from heat sources.

1.1. Delivery contents

1.1. Check compatibility of vehicle and accessories

Interface-box

V5C-M636

HW_____ SW_____

Take down the SW-version and HW-version of the interface boxes, and store this

manual for support purposes.

Requirements

Navigation E-series and Mini with navigation system or radio with 6.5” or 8.8“

monitor (E-series) with 4pin HSD LVDS connector

V5C-UNI01

harness

LVDS cable

CAB-HSD-MR-060-OZ

LVDS cable

CAB-HSD-DD075-O

Version 01.12.2015 V5-CIC-E

Page5

1.2. Setting the dip switches of the interface-box V5C-M636

Dip 1 and 2 on the back of the interface-box V5C-M636 are used to set the monitor type. The

default setting is:

Vehicle/ navigation

Dip 1

Dip 2

Dip 3

CIC-E (E-series), 6.5“ monitor.

OFF

No function

CIC-E (E-series), 8.8“ monitor

OFF

No function

After each change of the dip switch settings you have to execute a power reset of the

interface-box!

1.3. LED‘s of the interface-box V5C-M636

Validinput source

CAN ok

Power

Version 01.12.2015 V5-CIC-E

Page6

2. Connection schema

Rear-view

camera

Backof

head unit

4-PinHSD

LVDSfemale

vehicle harness

LVDScable

CAB-HSD-MR-060-OZ

Interface-box

V5C-M636

FRONT

Frontcamera

Interface-box

V5C-M636

REAR

LVDScable

CAB-HSD-DD075-O

Quadlock female

vehicle harness

Masse

+12V

CAN(2)

+12Vswitching

outputs

Rear gear signal

input (+12V)

V5C-UNI01

harness

CAN(1)

Version 01.12.2015 V5-CIC-E

Page7

3. Installation

Switch off ignition and disconnect the vehicle’s battery! The interface needs a permanent

12V source. If according to factory rules disconnecting the battery is to be avoided, it is

usually sufficient to put the vehicle is sleep-mode. In case the sleep-mode does not show

success, disconnect the battery with a resistor lead.

If power source is not taken directly from the battery, the connection has to be checked

for being start-up proven and permanent.

Prior to wire and device installation we suggest to connect and test correct function of all

after-market and factory infotainment equipment!

The interface is installed on the backside of the head unit.

3.1. Connecting interface-box and harnesses

CAN-LOW(2)

Interface-box

V5C-M631

FRONT

Quadlock female

vehicle harness

Ground

+12V

CAN-HI(2)

V5C-UNI01

harness

CAN-HI(1)

CAN-LOW(1)

Quadlock maleon

rear side of the

HeadUnit

Cut off the 8 pin Molex connector from V5C-UNI01

harness (is not needed).

Version 01.12.2015 V5-CIC-E

Page8

Cut the CAN bus wires of the vehicle harness and connect them in series according to

the pin assignment (see below) with the CAN bus wires from the V5C-UNI01 harness.

Connect red wire with +12V (pin 15) and black wire with ground (pin 12).

Connect female 12pin AMP connector of the harness V5C-UNI01 to the

front site of the V5C-M631 interface box.

Connect the female Quadlock connector of the vehicle harness on the rear side of the

head unit.

Pin assignment:

Cable colour

Assignment

●Red

+12V permanent input - Pin15

●Black

Ground - Pin 12

●●Yellow/Black

CAN HIGH Pin 11 - to the vehicle side

●●Blue/Black

CAN LOW Pin 9 - to the vehicle side

● Yellow

CAN HIGH Pin 11 - to the head-unit side

●Blue

CAN LOW Pin 9 - to the head-unit side

●Green

+12V power output

●Pink

+12V power output

●White

Rear gear signal input (+12V)

Quadlock

Version 01.12.2015 V5-CIC-E

Page9

3.2. LVDS connection

Connect the female 4pin HSD LVDS connector of the LVDS cable CAB-HSD-DD075-O

to the male 4pin HSD LVDS connector (LVDS-IN) on the rear of the

interface-box V5C-M636.

Remove the pink female 4pin HSD LVDS connector of the vehicle harness at the back

of the head unit and connect it to the male 4pin HSD LVDS of the

CAB-HSD-MR-060-OZ LVDS cable.

Connect the female 4pin HSD LVDS connector of the LVDS cable CAB-HSD-MR-060-OZ

to the male 4pin HSD LVDS connector (LVDS-OUT) on the rear of the

interface-box V5C-M636.

Connect the female 4pin HSD LVDS connector of the LVDS cable CAB-HSD-DD075-O

to the pink male 4pin HSD LVDS connector on the rear of the head unit.

Interface-box

V5C-M636

REAR

LVDScable

CAB-HSD-DD075-O

Backof

head unit 4-PinHSD

LVDSfemale

vehicle harness

LVDScable

CAB-HSD-MR-060-OZ

Indice

Altri manuali Caraudio-Systems Accessori per automobili

Caraudio-Systems

Caraudio-Systems r.LiNK RL-PCM3-TF Manuale utente

Caraudio-Systems

Caraudio-Systems C2-MK-CD Manuale utente

Caraudio-Systems

Caraudio-Systems OBD-ASK-CDC Series Manuale utente

Caraudio-Systems

Caraudio-Systems OBD-CIC-CDC Series Manuale utente

Caraudio-Systems

Caraudio-Systems TV-Free TF-E65 Manuale utente

Caraudio-Systems

Caraudio-Systems OBD-E65-CDC Series Manuale utente

Caraudio-Systems

Caraudio-Systems CI-RL4-MIB101 Manuale utente

Caraudio-Systems

Caraudio-Systems TF-UCON52 Manuale utente

Caraudio-Systems

Caraudio-Systems V5-CIC-F Manuale utente

Caraudio-Systems

Caraudio-Systems MD-VW01 Manuale utente

Caraudio-Systems

Caraudio-Systems TV-Free TF-MFD2 Manuale utente

Caraudio-Systems

Caraudio-Systems z.LiNK ZL-MFD2 Manuale utente

Caraudio-Systems

Caraudio-Systems AC-AUX-FM Manuale utente

Caraudio-Systems

Caraudio-Systems c.LOGiC lite C1-C25 Manuale utente

Caraudio-Systems

Caraudio-Systems RL-MZ72D Manuale utente

Caraudio-Systems

Caraudio-Systems TF-MMI Manuale utente

Caraudio-Systems

Caraudio-Systems c.LOGiC C4-LR12-NC Manuale utente

Caraudio-Systems

Caraudio-Systems v.LOGiC Intelligent Solution V5-NTG46 Manuale utente

Caraudio-Systems

Caraudio-Systems dvbLOGiC DVB-E65-TV Manuale utente

Caraudio-Systems

Caraudio-Systems usbLOGiC USB-NTG1 Manuale utente

Caraudio-Systems

Caraudio-Systems TV-Free TF-NTG5 Manuale utente

Caraudio-Systems

Caraudio-Systems MD-VW03 Manuale utente

Caraudio-Systems

Caraudio-Systems c.LOGiC C2-E65-TV Manuale utente

Caraudio-Systems

Caraudio-Systems L3-LR17 Manuale utente

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente