CareCo Tuni Spectra Guida utente
Spectra
Rollator
OWNERS HANDBOOK
Product Code: WA01064
Your Tuni Spectra Rollator
1. The Tuni Spectra Rollator folds to a
compact size for easy storage.
2. Height-adjustable handles for the user’s
safety and comfort are included.
3. Swivel front wheels offer easy control.
4. The curb climber design manoeuvres easily
over obstructions.
5. There is a brake system for parking
and stopping.
6. Reflectors on the handgrips and front and
back wheels are included for the
user’s safety.
Product Features
Thank you for purchasing the Tuni Spectra
Rollator. The Spectra Rollator has been
designed and manufactured to meet our own
high level of specifications and we hope you
will be delighted with your purchase.
The Spectra Rollator is a lightweight and
portable rollator designed to aid the user to
walk and offer stability and security to the user.
The Spectra is designed for use indoors and
outdoors and will take a maximum user weight
of 136kg.
NOTE: Check all parts for shipping damage. In
case of shipping damage, DO NOT use –
contact the dealer/carrier for further instruction.
Rollator Dimensions: 68cm (Length) x
64cm (Width) x 81.5 - 94.5cm (Height)
Seat Dimensions: 22cm (Depth) x 45cm (Width)
Folded Dimensions: 87cm (Length) x
25.5cm (Width) x 35cm (Height)
Brake Method: Handle Brake
Max User Weight: 136kg
Introduction
Specification
Ensure rollator is level to the ground before
using. All screws must be tightened, ensuring
there is no movement.
DO NOT hang anything on either side frame. This
will: (A) cause side tube to bend, and make the
rollator unstable, and/or (B) cause rollator to tip,
resulting in injury or damage.
Remove the rollator from the box. Lay the
rollator down on the floor with the handle tubes
on top. Unhook the red levers from the inside of
the leg tubes. Push the handle tubes forward so
that they are standing upright at a right angle to
the leg tubes, as shown in figure 1:
Pull the black metal levers on each side
backwards to push the washer inwards. Clasp
into the plastic slot on the leg tubes - this will
“snap” into position as in figure 2:
Read Before Use
Opening
Figure 1
To open the rollator, open the handles away
from each other as shown in figure 3. Press the
seat downwards. Continue pushing the seat
downwards until it clicks into the plastic slots
on each side. The rollator will remain open as
shown in figure 4:
Figure 3
Figure 2
Figure 4
To fold the rollator pull the handle in the centre
of the seat upwards to unclip the seat. Continue
pulling the seat upwards. Push the handles to-
wards each other to close the rollator as shown
in figure 5:
Folding
Figure 5
To completely fold the rollator, unlock the left
and right black metal levers from the slots on
the leg tubes. Rotate by 90 degrees and place
towards the front wheel. Pull the handle tubes
carefully down towards the back wheels. The
red levers will engage and click into place when
this is fully folded. The rollator can now be
stored or transported as necessary.
Assembly: Insert the wheel axle into the hole
inside the wheel support. When a “click” is
heard, the wheel is fixed into the correct
position - see figure 6.
Disassembly: Press the red button with one
hand. Take the wheel kit out of the wheel
support with the other hand as per figure 7:
Assembling and Disassembling the
Quick Release Kit
The rollator height should be adjusted so that
when the user’s arm is down by their side, the
handgrip is at wrist height. This will ensure the
arms are at an approximate 20°-30° bend when
using the rollator.
Push the metal button on
the handle tube in. Slide
the handle tube up or down
to the desired height.
Ensure the metal button
protrudes through the
appropriate adjustment
hole on the handle tube as
in figure 8:
Note: DO NOT remove the brake cable from the
handle tube or the brakes will not work.
For the brakes to function properly, the brake
cable should be flush alongside the frame and
correctly hidden inside the tube.
Adjusting the Handle Tube
Adjusting the Handle Tube
Figure 6 Figure 7
Figure 8
To release the brake system, loosen the brake
nut on the inside of the leg tube in a clockwise
direction as shown in figure 9:
Figure 9
Figure 10 Figure 11
Note: To loosen the
brake, rotate the nut
anti-clockwise.
Pull the top of the brake handles up towards the
hand grips to activate the hand brake.
To remain stationary, continue to hold the brake
handles up.
To continue mobility, release the brake handles.
To lock the hand brake, push down on the
bottom portion of the brake handle as shown in
figure 10 until an audible “click” is heard:
To release, pull up on the top part of the brake
handle as in figure 11:
Using the Hand Brake
To ensure the safe operation of the rollator,
these instructions MUST be followed:
DO NOT install or use this equipment before
reading and understanding this instruction
sheet. Please keep this manual properly for
future reference. If you are unable to
understand the warnings, cautions or
instructions, contact a healthcare professional,
dealer or technical personnel before attempting
to install this equipment – otherwise, injury or
damage may occur.
Each individual should consult with their
physician or therapist to determine proper
adjustment and usage.
Rollators are NOT intended to be self-propelled
while seated. DO NOT use the rollator on the
stairs or on elevators/escalators, please be
careful when using on slope.
It is recommended that a physical/occupational
therapist should assist in the height adjustment
of the rollator for maximum support and correct
brake activation, the fixture of the screw, the
position of the quick release/assembly kits.
Always ensure screws are fastened to the
connector, so that the connector cannot move
when forced. Ensure all copper balls fully
protrude through adjustment holes.
Safety Summary
Failure to follow these warnings can result in
personal injury. Care should be taken to ensure
that ALL hand and height adjustment are secure
and that moving parts are in good working
order before using this or any mobility aid. In
the process of using, all wheels must always be
in contact with the ground. This will ensure the
rollator is properly balanced. Before using the
seat, the brake must be in the locking position.
When using a rollator in the stationary state,
the hand brake must be locked.
After unfolding or assembling the rollator,
ensure that the seat support tube is securely
locked in the side slot and the quick release/
assembly kits are in their correct position and
locked. Ensure the rollator is level to the ground
before using. All screws must be tightened,
ensuring there is no movement.
DO NOT: hang anything on either side frame. This
will: (A) cause the side tube to bend, and make the
rollator unstable, and/or (B) cause the rollator to
tip, resulting in injury or damage.
• Ensure that every part of the rollator is
secure at ALL times.
• Check all screws regularly and make sure
the seat tubes are fixed into the side slot
properly - if not, press it again to secure.
• Ensure the quick release wheels are
assembled correctly.
Care and Maintenance
Questo manuale è adatto per i seguenti modelli
1
Altri manuali CareCo Ausilio alla mobilità
CareCo
CareCo ProLite Carbon X Manuale utente
CareCo
CareCo DL06107 Manuale utente
CareCo
CareCo XPEDITION Transport Chair Guida utente
CareCo
CareCo WA01055 Guida utente
CareCo
CareCo ALPINE Manuale utente
CareCo
CareCo Comet Manuale utente
CareCo
CareCo WA01057 Guida utente
CareCo
CareCo Pano Walker Manuale di programmazione
CareCo
CareCo Aluminium Glider 2.0 Manuale utente
CareCo
CareCo Breeze 8 II Manuale utente
CareCo
CareCo Breeze 8 Manuale utente
CareCo
CareCo BA09023 Manuale utente
CareCo
CareCo MS09132 Manuale utente
CareCo
CareCo Evo Guida utente
CareCo
CareCo FRONTIER MS01010033.TIM Manuale utente
CareCo
CareCo Deluxe Duo Manuale di programmazione
CareCo
CareCo Burly Manuale utente
CareCo
CareCo MS05016 Manuale utente
CareCo
CareCo Orbit WA01060 Guida utente
CareCo
CareCo iCONNECT STEALTH Manuale utente
