caron 7540-3 Specifiche tecniche
MODEL 7540-3
INST-PM-7540-3-VIS
Revision Log
Revisions
Description
Letter
Date
A
04-16-2018
Initial release.
INST-PM-7540-3-VIS Rev A 04/16/2018
Parts Required: (1) Air Filter, (4) Velcro Discs, (14) Lamps
Tools Required: Drill, Phillips Screwdriver Bit
Parts included in Preventative Maintenance Kit for Model 7540-3-VIS are shown below.
Note: Photos may have a different appearance depending on chamber options.
1. Turn off chamber and unplug power cord.
INSTRUCTIONS FOR REPLACING AIR FILTER AND VIS LAMPS IN
MODEL 7540-3
REPLACING AIR FILTER
Disconnect electrical power before opening lower grill assembly.
Lamps
Air Filter
Velcro Discs
INST-PM-7540-3-VIS Rev A 04/16/2018
2. Remove (2) screws on both sides of lower grill assembly using Phillips screwdriver
bit as shown below. Note: Retain screws.
3. Remove lower grill assembly by pulling away from chamber to release (2) bottom
latches as shown below.
4. Unfasten (4) Velcro connections on air filter and discard filter as shown below.
Note: Remove and discard any Velcro discs with loops that may still be attached
to hook discs located on condenser and replace hook discs as needed.
Lower Grill Assembly Screws
Lower Grill Assembly Latches
Air Filter
Velcro Connection Locations
INST-PM-7540-3-VIS Rev A 04/16/2018
5. Attach new Velcro discs with loops to hook discs on condenser corners with
adhesive facing outwards as shown below.
6. Center new air filter with condenser edges as shown below and press into place
with cardboard side towards condenser. Note: Once adhesive has touched air
filter it cannot be adjusted.
7. Reinstall lower grill assembly by engaging (2) bottom latches.
8. Secure lower grill assembly with retained (2) screws using Phillips screwdriver bit.
Velcro Disc Locations
Air Filter
INST-PM-7540-3-VIS Rev A 04/16/2018
Note: Photos may have a different appearance depending on chamber options.
1. Slide bottom light bank shelf out of chamber as shown below.
2. Remove light bank shelf and place lamp side up on flat surface as shown below.
REPLACING LAMPS
Bottom Light Bank Shelf
Bottom Light Bank Shelf
INST-PM-7540-3-VIS Rev A 04/16/2018
3. Remove and discard old lamp by rotating lamp ¼ turn and lifting out of lamp
sockets as shown below. Repeat for each lamp to be replaced.
4. Insert new lamp ends into lamp sockets and rotate ¼ turn. Repeat for each lamp
to be replaced.
5. Slide light bank shelf into chamber and press firmly to seat rear connector as
shown below.
6. Continue to instructions for replacing additional accessory preventative
maintenance items if applicable or plug in power cord and turn on chamber.
Lamp Socket
Light Bank Shelf
Press Here
INST-PM-7540-3-VIS Rev A 04/16/2018
7. Reset air filter and lamp alerts by pressing Settings button on right side of Home
screen as shown below.
8. Press Maint. button as shown below.
9. Press Reset buttons for Replace air filter and Replace VIS lamps as shown below.
10.Press Home button as shown below.
Settings Button
Reset Buttons
Home Button
Maint. Button
Indice
Altri manuali caron Attrezzature da laboratorio
caron
caron 7000-25 Manuale utente
caron
caron 7340-25 Manuale utente
caron
caron 7001-10 Manuale utente
caron
caron 7001-50 Manuale utente
caron
caron 2050 Manuale utente
caron
caron CRSY102 Manuale utente
caron
caron 7404-10 Manuale utente
caron
caron FLTR301 Manuale utente
caron
caron 6010 Manuale utente
caron
caron 6010 Manuale utente
Manuali Attrezzature da laboratorio popolari di altre marche
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manuale utente
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manuale utente
NI
NI PXI-5422 Manuale
Collomix
Collomix Aqix Manuale utente
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente
Ocean Insight
Ocean Insight FLAME-NIR+ Manuale utente
