Cartoni Master 25 Manuale utente
PROFESSIONAL CAMERA SUPPORT
USER’S MANUAL & Maintenance
2
3
Index
1.
Safety & Set-UpIntrodUctIon 4
2.
operatIng elementS 6
3.
procedUreS 8
4.
SpecIfIcatIonS 10
5.
maIntenance 10
6.
Warranty 11
7.
acceSSorIeS & prodUct lIne 12
CARTONI ®
All rights reserved ©
Manual Version: 2.3
Issue date: May 2020
4
1. Safety & Set-UpIntrodUctIon
The new MASTER 25 is a robust, yet lightweight Fluid Head. Designed
to support the latest cameras complete with long lens, viewnders, prompt-
ers and pan bar controls for new studio producon as well as OB/ENG/EFP
applicaons, with a payload capacity of up to 30 kg (66 lbs).
The MASTER 25, weighs only 4.4 kg (9.7 lbs) thanks to the extensive use
of extremely lightweight magnesium alloys, features a lt range of +/-90°
and easy to use rings which allow the camera operator or grip to preselect
the connuously adjustable uid drag and counterbalance on a numerical
scale from 0 to 10.
Both the pan and lt brake levers are easy to reach, also the Head fea-
tures a convenient horizontal lock for setup and a switchable illuminated
spirit level completes the operang specs.
With a 150 mm bowl, it oers a wide and stable base on tripods or hi-
hats. The Head base includes 4 bolt threads for direct interface to most of
the Pedestals.
Addionally, the Camera plaorm is equipped with a sliding Camera
plate, compable with competor gear as the Vinten Vision 250, with stan-
dard 11 cm plate or 22 cm extra-long plate for balancing o-set Camera
conguraons.
The MASTER 25 is the ulmate premium Head, with a combinaon of
perfect patented balance and a super-smooth, connuously variable pat-
ented uid drag on pan and lt modes, perfectly suited for the camera op-
erators needs.
5
That means the Head can precisely track slow moving objects and whip pan
in an instant.
Before using the product read this user manual.
Before installing the Fluid Head on the Tripod check the Tripod sta-
bility.
Verify that the Camera payload (including lenses and accessories) is
lower than the maximum capacity of the Fluid Head.
Before installing the Camera make sure that the Fluid Head is in good
condions and bares no evident damages.
6
1
Camera plate
2
Sliding Camera plaorm
3
Pan bar aachment
4
Pan bar extension
5
Pan drag selector
6
Tie down sha removable
7
Tie down knob
8
Horizontal lock lever
❶❷
❸ ❺
❽
❹
❼
2. operatIng elementS
❻
7
09
Tilt brake lever
10
Pan brake lever
11
Pan Bar
12
Slide lock release buon
13
Sliding plaorm lock
14
Tilt drag selector
15
Illuminated spirit level
16
Counterbalance selector
17
Level Bubble Light buon
18
Clamping screws
19
Baery tray
⓭
⓫
⓯ ⓱
⓲ ⓲
⓮ ❿
⓰
⓳
⓬
❾
8
Place the MASTER 25 on your Tripod by loosening the e-down knob
(7) under the Fluid Head and level using the level bubble (15). In low
light condions, press buon (17) for light.
Connect the Pan bar (11) to the Fluid Head ghtening the lever (3) on
the Pan bar aachment and select your desired operang angle. The
telescopic Pan bar length can be adjusted via lever (4).
Lock both Pan and Tilt brakes (9 & 10), turn both Tilt drag selector (14)
and Counterbalance knob (16) to the minimum.
Hold the plaorm (2) in horizontal posion and place the horizontal
lock lever (8) on the red dot for setup the camera.
Unlock the lever (13) and move the camera plate (1) from the plaorm
(2) by sliding the plate to the back.
Press the Release buon (12) in order to release the Camera plate (1).
Remove the Camera plate (1) by sliding it from the Camera plaorm
(2).
Aach the Camera plate (1) to the boom of the Camera and ght-
en the Clamping screws (18) to secure the Camera. Try to center the
Camera plate on the Camera, keeping the center of gravity posion
in mind.
Place the Camera by sliding the plate (1) forward on the plaorm (2)
unl the lock buon (12) clicks and when the camera is centered, lock
the lever (13).
3. procedUreS
9
Place the horizontal lock lever (8) on the green dot, hold the Camera
in horizontal posion with the Pan bar (11) and release the Tilt brake
lever (9).
Release the sliding plaorm lever (13) and nd the correct center of
gravity posion, by sliding the Camera plaorm (2) back and forth un-
l you have achieved the correct balance. Then lock the sliding plat-
form lever (13).
Set the Counterbalance system by turning the balance knob clockwise
(16) to appropriate tension. The Camera has to stay at any lt angle.
Eventually ne-tune by adjusng the sliding plate.
Unlock the Pan brake lever (10) and set the Fluid drag control by ad-
jusng selectors (5 & 14).
The MASTER 25 can be aached to most of the sliders via a 3/8”
treaded hole under the Head. The Head base also includes 4 bolt
thread for direct interface to most of the Pedestals. Remove the Tie
down sha (6) with a 10mm wrench and nd the relave xing holes
underneath.
When spirit bubble light (15) fails it is me to replace the baeries.
Pull out the baery tray (19) and replace n.1 x C1220-3V Baery.
10
4. SpecIfIcatIonS
With indoor use - when needed - just clean the MASTER 25 and Tripod
with a so cloth. Dirt accumulated during storage may be removed using a
brush or Air spray.
CARTONI products main mechanisms are sealed as they are also built
for professional outdoor use.
However, use under rough condions will require special care. Salt water
is very corrosive and can cause extreme damages. In atempt to avoid fur-
ther damage the Fluid Head should be washed o with fresh water at the
earliest opportunity and dried before storage.
Minimum payload 3 Kg 6.6 lbs
Maximum payload 30 Kg 66.1 lbs
Weight 4,4 Kg 9.7 lbs
Bowl diameter 150mm/Flat
Fluid Drag Connuous
Counterbalance Connuous
Pan range 360°
Tilt range +-90°
Temperature range -40 /+60 °C -40 /+140 °F
5. maIntenance
Altri manuali per Master 25
1
Indice
Altri manuali Cartoni Accessori per fotocamere
Cartoni
Cartoni MASTER 40 Manuale utente
Cartoni
Cartoni MAXIMA 30 Manuale utente
Cartoni
Cartoni Master 25 Manuale utente
Cartoni
Cartoni HiDV Manuale utente
Cartoni
Cartoni C20S Manuale utente
Cartoni
Cartoni focus hd Manuale utente
Cartoni
Cartoni FOCUS 8S Manuale utente
Cartoni
Cartoni Focus Manuale utente
Cartoni
Cartoni MASTER MK2 Manuale utente
Cartoni
Cartoni LIFTO 25 Manuale utente
Cartoni
Cartoni focus hd Manuale utente
Cartoni
Cartoni MASTER 65 FLUID HEAD Manuale utente
Cartoni
Cartoni focus hd Manuale utente
Cartoni
Cartoni P70 PLUS Istruzioni per il montaggio
Cartoni
Cartoni PRO + Manuale utente
Cartoni
Cartoni STEERING P70 Istruzioni per il montaggio
Cartoni
Cartoni P20 Manuale utente
Cartoni
Cartoni MAXIMA 5.0 Manuale utente
Cartoni
Cartoni FOCUS 22 Manuale utente
Cartoni
Cartoni MASTER 40 Manuale utente
