CAS ED Series Manuale utente

Altri manuali per ED Series

1

Indice

Altri manuali CAS Scala

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente

2

ED

3

CONTENTS

PRECAUTIONS................................4

PREFACE............................................6

DISPLAYAND KEYBOARD.........6

OPERATIONS...................................7

SETUPMODE .................................18

ERROR MESSAGES.....................23

SERIALINTERFACE....................23

SPECIFICATIONS.........................24

4

PRECAUTIONS

5

6

PREFACE

Thank you for the purchasing of ED series.

This series have been designed with CAS reliability, under rigid quality control and with outstanding

performance. Your specialty departments can enjoy with CAS products.

We hope that CAS product meets your needs. The user manual is designed to guide you to understand

product operation and proper care of product.

DISPLAY AND KEYBOARD

■DISPLAY

■KEYBOARD

7

■KEY FUNCTIONS

KEYS DES CRIPTIONS

Used to set the zero point to 0.00.

Used as an ESC key in Setup Mode.

Used to enter a tare weight and used to cancel a tare weight.

Used to convert the mode as below.

[WEIGHING] [pcs] [%][WEIGHT LIMIT ON/OFF] 

[COUNT LIMIT ON/OFF] [UNIT CONVERSION] [WEIGHING]

Used as an ENTER key.

Used to calculate a unit weight of a sample.

[▶] Used to enter next digit.

[▲] Used to have number up.

PRINT key.

[▼] Used to have number down.

Used to turn ON or OFF the power.

Not use.

OPERATIONS

1. General Weighing

■The display indicates if the scale is at zero or if there is a tare entered into the scale by way of a

ZERO and NET.

①Turn on the power. The

display shows 0.00. Make sure

that STABLE and ZERO lamps

are on.

②When the display is not zero

though there is nothing on the

platter, press the ZERO key.

③Place an item on the platter.

When the STABLE lamp is on,

read the weight.

8

2. Weighing with Tare

■Tare is the weight of container being used for a commodity. The TARE key subtracts the weight of

the container.

①Place the container on the

platter.

②Press the TARE key, NET

lamp is on..

③Place an item in the

container.

④To release the TARE function, remove an item and

container from the platter and press the TARE key.

3. Counting Mode

■If you want to count parts, first you have to set sample size.

OR

①Press the MODE key until the display shows “PCSSET”. Make

sure that PCS lamp is on. If you have set sample size before,

the display shows “0”.

②Press the SAMPLE key, then

the display shows “10”.

③If you want to increase sample size, press the SAMPLE key.

The display shows 10, 20, 30, 40, 50, 100, 150 and 200 every

time pressing the SAMPLE key.

9

④If you set sample size to 10, place 10 samples on the platter.

⑤Press the SET key. The display shows unit weight and then shows the number of samples. If the

display shows “LACK(◀ )”, the counting result may not correct. (LCD version : Lack of Unit lamp is On) If

the display shows “ Err9”, it is impossible to count samples because the unit weight is too small. (Refer to Table 1)

Model

ED 3kg ED 6kg ED 15kg ED 30kg

RangeofLack

1 g≥Lack 2 g≥Lack 5 g≥Lack 10 g≥Lack

RangeofLow

0.5g≥ Err9 1g≥ Err9 2 g≥ Err9 5g≥ Err9

< Table 1 >

⑥Place parts on the platter, then the display shows the number

of parts. You can also use tare function in counting mode

4. Percent Weighing Mode

OR

①Press the MODE key until the display shows “PErSEt”. If you

have set reference sample before, the display shows “0.0”.

②If you want to use container,

place it and press the TARE key.

10

④Place an item on the platter, then the weight is displayed as a

percentage of the reference..

5. Hold Function

■Key hold

①Place an item on the platter and then press the HOLD key.

②“HOLD” is shown on the

display.

③Average weight is shown on

the display.

■After average weight display 3 times, HOLD function will be release automatically.

■Auto Hold function

①After weighing item

remove all of the container

from the platter, press Hold key.

②Use “TARE” key to select

one of Auto Hold function.

③Press “Hold” key to save

and exit to normal mode.

④Place an item on the platter.

Then weight display will show “Hold”.

The “Hold” blinks for two times, and then

the average weight blinks continuously.

⑤After remove the item of the platter, place another item on the platter.Then display will show

average weight again. If you don’t want use auto-hold function, remove the item and press hold

key. Display shows AH_on. Press tare key. İt will be changed AH_off.

Then press Hold key. Auto-hold function will not operate.

③Place reference sample on the platter and press the SAMPLE

key. The display shows “100.0”. Make sure that reference sample

bigger than 3% of maximum capacity. If it is lower than 3% of

maximum capacity, the display shows “low”. In this case, increase

the weight of reference sample and press the SAMPLE key.

11

6. Cumulative Weight Sum

The function of cumulative weight sum is to be showing the aggregate times and

weight as adding the value of weighing a several times. Even though power is

off, the scale stores data. This function is only available in weighing mode.

①Place an item on the platter. ②To add this weight, press the SAMPLE key. Make sure that

SUM lamp is on.

③The display shows cumulative weight sum and aggregate times every time pressing the SET key.

④To cancel last added weight, press the SET key to display cumulative weight sum or aggregate times and then

press the SAMPLE key. The display shows “S SUB”.