CAS RW-2000Z Manuale utente

그럼ㄷ

Table of Contents

Caution .................................................................... 4

1. Introduction .............................................................. 5

2. Features and Key Functions .................................. 6

3. Technical Specifications ......................................... 6

4. Explanation of Frontal Aspect................................ 9

5. Menu ........................................................................ 14

6. Method of Weighing Truck.................................... 22

7. Method of Searching Truck Data ......................... 24

8. RW10Z/15Z Utilization Method ............................. 26

9. How to Change Printer Roll.................................. 27

10. Error Message and Measure to be Taken......... 29

Caution

⊙Safety Caution

Make sure to comply with the safety cautions as they are designed to prevent

dangers in advance by using the products safely and properly.

Cautions are categorized into 2 types and the significances of ‘Warning’ and

‘Caution’ are as follows.

Refers to situation that may result in high possibility of substantial danger

including death or serious injuries if the directions are infringed.

Refers to situation that may result in high possibility of injuries or material losses if

the directions are infringed.

1. Never disassemble, repair or modify.

Such will not only exempt the product from warrantee but also cause damages to

the apparatus, electrocution or fire.

2. Do not damage, process or excessively pull, bend or twist the power supply cord.

This may damage the power supply cord and may cause fire or electrocution.

3. Do not place combustible spray or fire in nearby location.

4. Do not water to external aspect of the product of use in humid location. This may

cause insulation to be deteriorated, thereby causing risk of electrocution or fire, or

occurrence of error in weighing.

5. Do not place at location exposed to direct sunlight or near hot objects such as

stove. It may cause fire.

6. Make sure to insert the power supply plug fully in order to prevent the plug from

becoming loose. If the contact is not stable, electrical spark may occur and cause

fire.

1. Frequently inspect for error in measurement to ensure accurate measurement. If

the equipment is used outside the range of allowed error due to negligence in

usage or other causes, then accurate measurement will not be obtained.

2. Do not impart sudden impact on the product. This may cause damage to the

product and prevent accurate measurement.

3. Do not use in places with rapid temperature change or severe vibrations.

It may cause error in measurement and breakdown. (Maximum measurement

error ±10 scales)

4. Do not install in location with excessive generation of electromagnetic waver. It

may result in erroneous measurement.

5. If there is “Battery” message on RW2000Z, make sure to recharge the battery. If

the output falls below the minimum operational power output, the Indicator will be

turned off.

1. Introduction

Thank you very much for purchasing our CAS RW-2000Z (hereinafter referred to as

RWZ) Vehicle Weighing System.

This product was manufactured with strictest quality control with meticulous attention

paid to every components and inspection, and has outstanding performances and

high grade features

CAS RWZ Vehicle Weighing System is a product with abundance of functions and is

designed to comply with the special requirements of road well. Furthermore, the

external design is sturdy and elegant.

In addition, it is programmed with focus on the convenience of the user in order to

enable them to use the product easily, and has built-in message display function to

assist with the comprehension of users.

Make sure to read this manual thoroughly prior to using the RWZ Vehicle Weighing

System of our company for proper utilization in order to sufficiently use all the

functions of the product.

2. Features and Key Functions

Features

It is small in size, making it easy to carry.

Easy manipulation

With built-in high capacity battery, it can be operated without separate power supply

It can be recharged with AC power supply as well as through cigar jack in vehicles

With BACK LIGHT function, it can be used even in dark place

Built-in printer

3. Technological Specifications

RW2000Z

Digital and Display Section

Display of weight LCD (6 digit + Sign)

Pad display Support display (2 digit)

Size of text 24 mm (height)

Indication less than 0 "-" minus display

Status display SUM,ZERO, STABLE, UNIT(kg,lb)

Power source DC12~24V

Wireless format ZIGBEE 2.4GHz

Product weight 10.6kg

Battery life 48 hours

Recharging time of battery 24 hours

Accessory

Items Quantity Specifications

User manual 1 RW-2000Z

DC 12V Adaptor 1 12V 1.5A

Indicator Box 1 414*302.8*140

Indicator Box Belt 1 1.5m

Cigar jack wirer ass’y for

connection to vehicle 1 3m(Option)

RW10Z/15Z

Model RW-10Z RW-15Z

Max Capa 10,000kg 15,000kg

Division 20kg 20kg

Electrical Specifications

A/D speed 200 times/sec

Resolution 1/750

Operational hours 12 hours

Operational power supply AA Size Dry Battery or 4 units of 1.2V

Rechargeable Battery

Internal power supply / applied current 3.3V / 80mA

Apparatus Specifications

External dimensions 900mm X 500mm X 40mm

Weight 32.5kg

Others Power ON/OFF key, antenna connection section

Communication Specifications

Wireless communication format Zigbee

Frequency band 2.45GHz

Communication channel 16 channel

PAN ID 216 units

Open area: 100m Presence of obstacles: 30m

Effective communication distance Note: it may differ depending on the surrounding

conditions

4. Explanation of the Frontal Aspect

LCD

Status Type Explanations

Stabilization lamp Indicates that the measure weight is in stable

state

Zero lamp Displayed when the current weight is 0 kg

Summation lamp Displayed when the current mode is summation

mode

Indicator battery alarm

lamp Indicates alarm for low batter of RW2000Z

Support display

Status Explanations Comments

Numbers (1~6) Displays the currently selected PAD

tE Indicates that it is currently under TEST state

SE Indicates that it is currently under SET state

CA Indicates that it is currently under CAL state

Pt Indicates that it is currently under PRINT state

FI Indicates that it is currently under SEARCH state

Printer lamp

Status Type Explanations

Red lamp of PRINTER Power source lamp of the

printer

Indicates the state of application of power

to printer

Green lamp of

PRINTER

SELF-TEST lamp of the

printer

Indicates presence of abnormality after

self-testing of the printer

POWER lamp Indicates external power

source

Indicates connection with external power

source

CHARGE lamp Indicates recharging Red: currently recharging

Green: completion of recharging

Lamp on the frontal aspect

Status Type Explanations

POWER lamp Indicates external power

source

Indication of connection with external

power source

CHARGE lamp Indication of recharging Red: currently recharging

Green: completion of recharging

Keyboard

ZERO

Short Turns the weight indication around Zero Point to 0.

(Operates up to 2% of the maximum weight)

PAD

Short

When the PAD is pressed and desired PAD No. pressed, then it will

display only the weight on the corresponding PAD only.

Support display will indicate the No. of the current PAD.

If you wish to find out the weight of other PAD, press the PAD key

again and press the corresponding No. of PAD.

It will not operate if number other than the number of PADs currently

connected.

To display the overall weight again, press the SUM key.

Print function and FIND function does not operate in this mode.

TRUCK No.

Short

Enter the vehicle number after having pressed the TRUCK NO key.

You can print for each axle by pressing the PRINT key after having

entered the vehicle number.

Short

You can start printing with PRINT KEY without using the TRUCK NO

key. When printing with the PRINT KEY, the vehicle number will not be

outputted.

Every time the PRINT key is pressed, the weight of the axle will be

printed.

Once it reaches the maximum number of axles (5 axles), overall

weight will be printed automatically, and whether to save the data will

be determined in accordance with the automatic saving option. (Same

as when the SUM key is pressed.)

SUM

Short

Use after having printed all the axles with the PRINT key.

Measured weights of axles will be summed and printed, and

terminates the operation of printer.

Whether to save the data will be determined in accordance with the

automatic saving option.

Long Transfers to the overall weight measurement state from individual

weight measurement state.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali CAS Scala

CAS

CAS PW-2H Manuale utente

CAS

CAS FW500 Manuale utente

CAS

CAS DB-II series Manuale utente

CAS

CAS SW-II Series Manuale utente

CAS

CAS LDT Manuale utente

CAS

CAS MW-II Series Manuale utente

CAS

CAS LP-II Istruzioni di installazione e manutenzione

CAS

CAS S2000 Jr. Series Manuale utente

CAS

CAS RW Series Manuale utente

CAS

CAS LP-II Istruzioni di installazione e manutenzione

CAS

CAS Retail PR-T Series Manuale utente

CAS

CAS ECB Series Manuale utente

CAS

CAS WEIGHING SOLUTION SWII PLUS Series Manuale utente

CAS

CAS PR-II Series Manuale utente

CAS

CAS SW-1S Series Manuale utente

CAS

CAS LP-1000N Series Manuale utente

CAS

CAS CL5000 Series Manuale utente

CAS

CAS SW-1S Series Manuale utente

CAS

CAS SW-1S Series Manuale utente

CAS

CAS ED Series Manuale utente

CAS

CAS CL7200 series Manuale utente

CAS

CAS LP-II Manuale utente

CAS

CAS PR-T Series Manuale utente

CAS

CAS PDN Series Manuale utente

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente