Cateye PADRONE SMART Manuale utente

CONNECT with your SMARTPHONE

CC-PA500B

■Introduction

■Setup

■Operation

■FAQ

■Troubleshooting

The Bluetooth word mark and logos are owned by

Bluetooth SIG, Inc. and any use of such marks by

CATEYE Co., Ltd. is under license. Other trademarks

and trade names are those of their respective owners.

PADRONE SMART

CC-RD500B

STRADA SMART

SMART COMPUTERS USER'S GUIDE

The smartphone’s built-in GPS can be used to measure and record such aspects

as speed, altitude, and travel route.

Speed/cadence sensor

(ISC sensor)

Heart rate sensor

The smartphone can communicate with supported sensors and smart computers

via Bluetooth.

Capabilities with a Smartphone

Introduction SMART COMPUTER

Introduction

Capabilities with a Smart Computer

Sensor Direct ModeMirror Mode

-Display data measured by the smartphone on the smart computer.

-Use the smartphone’s built-in GPS for sensor-free operation.

-Use Bluetooth® SMART sensors for extended functionality.

-Display phone and mail notifications on the smart computer.

-Connect sensors directly to the smart computer for

measurement.

-Use a smartphone to manage measurement data saved

in the smart computer after completing a ride.

Two Modes

SMART COMPUTER

Introduction

Mode options

Device used for measurement

and recording

*Summary : Ride date and time, Elapsed time, Trip distance, Average and Maximum values of each measurement

*Smartphone

GPS

*Smartphone

GPS

*Padrone

only

*Padrone

only

*Smartphone

GPS

Measuring,Displayed

Speed Altitude

Cadence,Heart Rate,

Power

SMS

(Text)

Call Email Map Graph Summary

Notification Record

Mirror mode

Smartphone

Mirror mode

Smartphone + sensors

Sensor direct mode

Sensors

Display

Comparison between average speed

and current speed

Turns on when there is insufficient memory

for summary data

Bottom row display

Flashes when an incoming

call / email / SMS(Text) is

received

Turns on in mirroring mode

Flashes when smartphone

battery is low

Flashes when the computer battery is low

Sensor reception status

Speed: S

Cadence: C

Hear rate: H

Power: P

LED turns on when an incoming

call/email is received

Bottom row display

Average

Maximum

Total Distance

Elapsed Time

Altitude

Trip Distance 1

Trip Distance 2

Clock

Cateye Cycling

Cateye

Free

Use the above QR codes or search for “Cateye Cycling” on the App Store or on Google play.

Download the app and register (pair) the devices (smart computer and/or sensors) to the smartphone.

After the device is detected, tap “Pairing”

to pair the device (Fig. 1).

*When pairing a PADRONE SMART to an iPhone,

the screen to the right (Fig. 2) will also be displayed.

(Fig. 1) (Fig. 2)

< Speed/cadence sensor (ISC sensor) > < Heart rate sensor >

Move the magnet through

the sensor zone several times.

Rub both electrode pads

with your thumbs.

Press and hold the MODE button until the

smartphone search screen is displayed,

then release.

< Smart computer >

Send a signal from the device.

*When the smart computer is mounted

on a bracket, pressing the surface of

the unit depresses the MODE button

on the back of the computer.

MODE

Search screen

Use the smartphone to search for connectable devices.

Tap Device > Pairing

* Connect must be set to .

1. Downloading the app

2. Pairing the device

Setup SMART COMPUTER

Setup

3. Configuring the smart computer

SMART COMPUTER

Setup

The smartphone will automatically configure the following settings on the smart computer.

Clock : Adjusted when the smartphone is connected.

Units (km/mile) : Syncs the unit settings from the app.

Sensor pairing for Sensor Direct Mode :

Usable with PADRONE SMART 1

in Sensor Direct Mode

The smart computers and sensors listed under Device

will be available for use in Sensor Direct Mode.

(The sensors will also be paired with the smart computer for

direct connectability.)

(Configure notification settings, auto pause, display

customization, total distance input, and other settings)

under

Other smart computer-related settings

*These settings are only available while the smart computer

is connected to the smartphone.

Device

●Using in Mirror Mode

1. Connecting the smartphone and smart computer

2. Measuring and uploading

Operation SMART COMPUTER

Operation

RECORDING

1sec.

READY

PAUSE

1sec.

Press

After a trip is completed, the measured

data can be saved and uploaded.

*Measurement can also be started and paused from the app screen.

Switch bottom

row display Save & Upload

*Heart rate sensors become connected when worn, and speed/cadence sensors become connected

when the wheel is rotated and a signal is transmitted.

Trip

*When the smart computer is mounted

on a bracket, pressing the surface of

the unit depresses the MODE button

on the back of the computer.

MODE

Search screen

Press and hold the MODE button

until the smartphone search screen is

displayed, then release.

The smartphone is connected once

the smartphone icon is displayed.

The app will return to .

Ensure that

Connect ON

Refer to the sensor’s operation manual or online manual for sensor mounting instructions.

1. Switching to Sensor Direct Mode

• Using in Sensor Direct Mode

2. Measuring

SMART COMPUTER

Operation

ON OFF

1sec.

Disconnect the app on the smartphone

if Mirror Mode is enabled.

*When switching from Mirror Mode to Sensor Direct Mode,

it may take a moment for the sensors to switch connection to the smart computer.

In addition, if the smart computer is currently

searching for a smartphone, press and hold the

MODE button until the search is canceled.

The smart computer is in Sensor Direct Mode

when the smartphone icon is not displayed.

Connect

3sec.

Measurement begins directly after the speed signal is detected.

Data readings will return to 0.

Ride data up to that point will be saved in the smart computer.

Saved data can be moved to the app and viewed there.

*The smart computer will switch to the smartphone

search screen after 1 second. Keep pressing the

MODE button until the data is reset.

Switch bottom

row display

RESET

Press

FAQ SMART COMPUTER

FAQ

Under what smartphone conditions can devices (smart computers and sensors)

be connected?

How do I disconnect a device from the smartphone?

How can I view the Sensor Direct Mode records?

How do I clear the e-mail, phone, and SMS(text) notification icons displayed

on the smart computer?

Why don’t the values change when using the smartphone’s GPS to measure speed?

Connect

As long as the app is running (including during sleep mode) and

is switched to , the smartphone will normally search for paired devices.

The smart computer will become connected just by searching for a smartphone,

and the sensors will become connected just by transmitting a signal.

Even when disconnected due to noise or distance, both devices will enter the search mode

and automatically reconnect.

Disconnecting is performed using the app.

Sensor Direct Mode ride data saved in the smart computer

can be viewed once the data is transferred to the app.

*After importing, the ride data saved in the smart computer

will be automatically deleted.

*The icon will only be displayed when data has been saved

in the smart computer, and the smart computer is connected

to the smartphone.

The icons will be cleared whenever the trip is paused, regardless of whether the e-mail, phone,

or SMS(text) has been viewed.

It may take a while for the smartphone to acquire a GPS signal, and the speed values may not

change right away when measuring without using the sensors.

Device

*Notifications must be configured under .

ON OFF

Connect

Activity List > Import from CC

SMART COMPUTER

FAQ

Why does uploaded ride data that has been deleted from the web

still show as “Uploaded” on the app?

Why is the smart computer’s screen in sleep mode upon

returning to the bicycle?

Why is there variation in the measurements for ascending altitude?

Why isn’t all ride data displayed under Upload?

Why don’t some map thumbnails show under Activity List?

Upload Account

Activity List

The app shows whether data has been uploaded in the past.

There is no way for the app to know if the data has been deleted from the web.

Note that it is still possible to re-upload ride data that is displayed as Uploaded.

If a refresh mark is displayed in place of the map, the map

display will be reloaded when the activity is opened.

*Depending on the signal strength and smartphone

performance, the display may show as incomplete.

When the smartphone moves away from the bicycle even for a short time,

the smart computer may automatically enter sleep mode.

Press the MODE button to reconnect with the smartphone.

Because altitude measurements rely on the smartphone’s GPS function,

the measured altitude may be different from the actual altitude.

Sleep mode

Only ride data that has not been uploaded to CATEYE Atlas, STRAVA, or Training Peaks is displayed.

To upload previously uploaded ride data to another site,select a different site from .

*Uploading through will push data to those sites turned to ON under .

Tap to reload

SMART COMPUTER

Troubleshooting SMART COMPUTER

Troubleshooting

Is pairing complete? Pairing must be completed to connect a sensor to a smart computer.

Is there a signal being transmitted from the sensor?

This can be checked using a BLE-related app on the smartphone.

Is there sufficient battery power left in the sensor?

Is the sensor connected to a different smartphone or smart computer?

A sensor can only be connected to one smartphone or smart computer at a time.

Example apps:

BLEScannerLightBlue

A connection with the heart rate sensor or the speed/cadence sensor

cannot be established. (Sensor Direct Mode)

Is Bluetooth on the smartphone turned on?

Is pairing complete? To connect to a smartphone, pairing must be completed.

From the smartphone search screen, switch back to Sensor Direct Mode once

and then try connecting to the smartphone again.

Is the smart computer connected to a different smartphone?

The smart computer can only be connected to one smartphone at a time.

Smartphone search screen Sensor direct mode

A connection with the smartphone cannot be established.

1sec.

Is Connect in Cateye Cycling switched ?

Connect

Altri manuali per PADRONE SMART

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Cateye Accessori per biciclette

Cateye

Cateye Padrone Smart CC-PA500B Manuale utente

Cateye

Cateye HL-330 Manuale utente

Cateye

Cateye Rapid mini TL-LD635-R Manuale utente

Cateye

Cateye CC-VT100W Manuale utente

Cateye

Cateye TL-LD170-R Manuale utente

Cateye

Cateye Stealth EVO CC-GL11 Manuale utente

Cateye

Cateye PADRONE DIGITAL Istruzioni operative

Cateye

Cateye CC-RD400DW Manuale operativo

Cateye

Cateye STRADA SMART Manuale utente

Cateye

Cateye CC-VL510 Manuale utente

Cateye

Cateye CC-CD300DW Manuale utente

Cateye

Cateye WEARABLEX SL-WA100 Manuale utente

Cateye

Cateye Wearable X SL-WA100 Manuale utente

Cateye

Cateye PADRONE DIGITAL CC-PA400B Manuale utente

Cateye

Cateye MICRO Wireless CC-MC100W Manuale utente

Cateye

Cateye VELO2 Manuale d'uso e manutenzione

Cateye

Cateye RAPIDX2 TL-LD710-R Manuale utente

Cateye

Cateye PADRONE DIGITAL CC-PA400B Manuale utente

Cateye

Cateye CC-AT200W Manuale utente

Cateye

Cateye COMMUTER CC-COM10W Manuale utente

Cateye

Cateye CC-RD310W Slim Manuale utente

Cateye

Cateye CC-RD400DW Manuale utente

Cateye

Cateye Tomo CC ST-200 Manuale utente

Cateye

Cateye Enduro CC-ED400 Manuale utente

Manuali Accessori per biciclette popolari di altre marche

Sigma

Sigma BC 16.16 Manuale utente

Playcore

Playcore Dero Setbacks Manuale utente

VDO Cyclecomputing

VDO Cyclecomputing x3dw Manuale utente

buratti meccanica

buratti meccanica Clorofilla Trail Manuale utente

Shimano

Shimano SG-8R20 Istruzioni operative

BOB

BOB YAK Manuale utente

APLIC

APLIC 303303/20190717TW012 Manuale utente

SRAM

SRAM AXS BlipBox Manuale utente

Garmin

Garmin EDGE 500 Manuale utente

Shimano

Shimano FD-RX810 Manuale utente

KMART

KMART 43115907 Manuale utente

SIGMA SPORT

SIGMA SPORT Buster 2000 Manuale utente

NVO Components

NVO Components STEM Manuale utente

DAXYS

DAXYS BP188 Manuale utente

XLC

XLC BV-W17 Manuale utente

Deda Elementi

Deda Elementi SUPERBOX Manuale utente

Akku Vision

Akku Vision e-bike vision 10046 Guida rapida

Squire

Squire Inigma Manuale utente