CDA HC7621FR Guida rapida

www.cda.eu

HC7621FR

Ceramic hob

Installation, use and maintenance

Contents:

3 Important

5 Important information

6 Using your hob

8 Operating time limiter

9 Triple zone function

9 Dual zone function

10 Auto-heat function

11 Timer/Minute minder

13 Safety key lock

14 Residual heat indicators

14 Ecient use of your hob

16 Care and maintenance

17 Cleaning guide

18 Troubleshooting

20 - 24 Installation

20 Installation - preparation

22 How to install the hob

24 Mains electrical connection

27 Energy eciency information

Important

The CDA Group Ltd cannot be held responsible for injuries or losses

caused by incorrect use or installation of this product. Please note

that CDA reserve the right to invalidate the guarantee supplied with

this product following incorrect installation or misuse of the appliance

or use in a commercial environment.

This appliance is not designed to be used by people (including

children) with reduced physical, sensorial or mental capacity, or

who lack experience or knowledge about it, unless they have had

supervision or instructions on how to use the appliance by someone

who is responsible for their safety.

Under no circumstances should any external covers be removed for

servicing or maintenance except by suitably qualiﬁed personnel.

Appliance information:

Please enter the details on the appliance rating plate below for

reference, to assist CDA Customer Care in the event of a fault with

your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

EU Declarations of Conformity

This appliance has been manufactured to the strictest standards and

complies with all applicable legislation, including Electrical safety

(LVD) 2014/35/EU and Electromagnetic interference compatibility

(EMC) 2014/30/EU. Parts intended to come into contact with food

conform to 1935/2004/EC.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE

PRODUCT IN ACCORDANCE WITH EU DIRECTIVE 2012/19/EU.

At the end of its working life, the product must be taken to a special

local authority waste collection centre or to a dealer providing

appliance recycling services.

Disposing of a household appliance separately avoids possible

negative consequences for the environment and health. It also

enables the constituent materials to be recovered, saving both energy

and resources. As a reminder of the need to dispose of household

appliances separately, the product is marked with a crossed-out

wheeled dustbin.

Please note:

•Ceramic hobs become hot and remain hot during and immediately

after use. Do not touch the hob until it has been allowed to cool.

•Keep children away from the appliance when in use.

•Never use the hob top for storage.

•Pan handles should never stand out beyond the edge of the

worktop. This will help to avoid children reaching them.

•Do not lean over the hob when it is in use.

•Follow the cleaning instructions carefully.

•Ensure the base of the saucepan is clean and dry before placing it

on the hob.

•Avoid hard shocks from cookware – the vitroceramic glass surface

is highly resistant but not unbreakable.

•Do not place hot lids ﬂat on the hob top. A “suction” eect could

cause damage to the hob.

•Do not drag cookware across the hob top: in the long term, this

could cause damage to the hob.

•Do not store cleaning or ﬂammable products in the unit below the

hob.

•Always use appropriate cookware.

•Do not cook unopened tins of food directly on the hob.

•Never put cooking foil or plastic materials on the ceramic surface

when the hob is hot. These materials could melt and cause

damage to the hob.

•This hob (Class 3) has been designed for use only as a cooking

appliance. Any other use should be considered incorrect and

therefore dangerous.

Important

•Do not use the hob if the glass surface is cracked or damaged to

prevent the risk of electric shock. Disconnect it from the power

supply.

•Ensure that the power cable of a connected electrical appliance

near the hob is not in contact with the cooking zones.

Please note:

•When connecting the hob to the power and switching it on for the

ﬁrst time the cooking zone displays may show the letter " ". This is

not a fault and the letter " " should disappear after approximately

one hour. Please see page 14 for more information.

•The safety key lock may be active. Simply press and hold the

safety key lock sensor (2) for three seconds to deactivate it.

Using your hob

Zones:

1. Front left 2.3kW Ø210/175/120 mm 4. Back right 1.8kW Ø180 mm

3. Central 2.2kW Ø170 x 265 mm

2. Back left 1.2kW Ø145 mm 5. Front right 1.2kW Ø145 mm

Control panel:

1. On/o sensor 5. Timer plus setting sensor

2. Safety key lock sensor 6. Timer minus setting sensor

3. Zone plus setting sensor 7. Timer sensor and display

4. Zone minus setting selector 8. Triple zone sensor

Fig. 1

Fig. 2

To switch the hob on

•To switch the power on, touch and hold the on/o sensor (1) for

approximately two seconds. The hob will beep and all ﬁve cooking

zone indicators will show ‘0’.

Please note: If a power level is not set within ten seconds, the hob

will switch o automatically.

After switching the mains supply on to the hob, or if the mains supply

is interrupted and then restored, the safety key lock may be activated.

The safety key lock LED will be on to indicate this. Simply press and

hold the safety key lock sensor (2) for approximately two seconds to

deactivate the satey key lock and proceed to use the hob as normal.

The safety key lock also activates after 60 seconds if the appliance

if switched o via the 'On/o sensor' (1). This is to help to prevent

accidental use. Simply follow the same step as above to deactivate

the safety key lock.

To set the power level

•After switching the hob on, simply select the desired heat setting

using the '+' or '-' selectors for that zone. The power level ranges

from 1 (minimum) to 9 (maximum). The hob will then begin heating.

You can also press the '-' selector ﬁrst to jump straight to power

level 9.

To turn the power o to a zone

•To switch o a zone you can use the zone's '-' selector to return the

heat setting to 0 or alternatively you can press both the '+' and '-'

selectors simultaneously for that zone. The cooking zone indicator

will display a '0' to conﬁrm that the zone is now inactive.

• If switching o multiple zones, the above steps need to be taken

for each zone. When all the zones are at '0', the hob will switch o

automatically after approximately ten seconds.

•Alternatively, to switch o the hob immediately, touch and hold the

'On/o sensor' (1) for approximately two seconds.

Please note: Any zones that are still hot to the touch will display an

" " provided the mains power supply is not interrupted.

Operating time limiter

Each zone has an operating time limiter to increase overall eciency

and to prevent the hob from being left on indeﬁnitely. If a zone's heat

setting is not changed for a speciﬁc duration then the associated zone

is automatically switched o and residual heat indicator activated.

Zones can still be used as normal in accordance with the operating

instructions. The operating time limiter is set according to the last

selected heat setting. The maximum operating times for each setting

can be found below.

Zone Power Level

Maximum

Operating Time

(hours)

234 5 6 7 8 9

5 5 4 3 2 2 2 1

Triple zone function

The front-left zone is equipped with a triple zone function that allows

you to extend the heating area for the zone. In normal use, the zone

functions with just the smaller inner ring until the triple zone function is

activated.

To activate the triple zone function

•Simply set a power level on the front-left zone and then press the

triple zone sensor (8) once to activate the middle zone and press it

again to also activate the outer zone. The LEDs above the triple

zone sensor (8) will illuminate accordingly (one for when the double

zone is active and two for when the triple zone is active).

To deactivate the triple zone function

•Simply press the triple zone sensor (8) for a third time. Both LEDs

either side of the triple zone sensor (8) should extinguish and the

zone will return to operating on the inner zone only.

Dual zone function

The central zone is equipped with a dual zone function that allows

you to extend the heating area for the zone. In normal use, the zone

functions with just the lower circular ring until the dual zone function is

activated.

To activate the dual zone function

•Simply set a power level on the central zone and then press the

triple zone sensor (8) once to extend the zone. An LED above the

triple zone sensor (8) will illuminate to show you that the dual zone

is active.

To deactivate the dual zone function

•Simply press the triple zone sensor (8) for a second time. The LED

above the triple zone sensor (8) should extinguish and the zone will

return to operating on the circular zone only.

Auto-heat function

•Every zone is equipped with an auto-heat function, which reduces

the warming up time for the zone. To turn on the auto-heat function,

the zone in question must ﬁrst be set to heat setting 0.

•Touch the '-' sensor for that zone once. The heat setting will be set

to '9'. The zone display will alternate between '9' and the letter 'A'.

•Next, adjust the zone to the desired heat setting between 1 and 8.

The decimal point next to the set power level will ﬂash and then

remain solidly lit for a preset period of time before reducing the

power to the originally selected heat setting. The duration of each

auto-heat setting's limiter is shown in the table on the following

page.

• To disengage the auto-heat function simply touch both the '+'

sensor and the '-' sensor simultaneously for that zone. The

cooking zone indicator should revert to 0. Alternatively, raise the

power level by one level and then lower it by one.

A table showing the operating time limit of the auto-heat function for

each power level is shown on the following page.

Indice

Altri manuali CDA Piano cottura

Manuali Piano cottura popolari di altre marche

Siemens

Siemens EX875KYV1E Scheda tecnica

AEG

AEG CERAMIC HOB 6010 K Manuale utente

VALERA

VALERA CT 70A Manuale utente

Zanussi

Zanussi ZGF 6420 Manuale utente

Gaggenau

Gaggenau CI 273 Manuale utente

G3 Ferrari

G3 Ferrari Energy Manuale utente

Pkm

Pkm IN4B Manuale utente

Award

Award H903BG Manuale utente

Zanussi

Zanussi VCH 5005 RZ Manuale utente

Miele

Miele KM 523 Manuale utente

Hotpoint

Hotpoint IS67V8CCXT/E Manuale utente

AEG

AEG HK854870XB Manuale utente

Cookology

Cookology SEP600BK Manuale utente

Bauknecht

Bauknecht Hob Manuale utente

Zanussi

Zanussi ZGM 782 Manuale utente

dipo INDUCTION

dipo INDUCTION DIBK218S Manuale utente

Miele

Miele KM 5987 Manuale utente

Miele

Miele KM 360 G Manuale utente