Cellink BIO X 10-mL Manuale utente
BIO X 10-mL Pneumac Printhead
User Manual
Contents
1.Package contents 1
2.Technical specicaons 3
3.Safety informaon 9
3.1 BIO X system warnings 10
3.2 Pneumac Printhead warnings 10
4.Geng started 11
4.1 Unpacking and installaon 12
4.2 Raising and lowering the printhead 13
4.3 Loading the bioink cartridge 14
4.4 Your rst bioprint 16
4.5 Removing the printhead 23
4.6 Prinng opmizaon 25
5.Relevant G-code commands 27
6.Frequently asked quesons 31
7.Maintenance 35
Support informaon 37
1
Package contents
01
2
01 Package contents
Item Part number Quanty
BIO X 10 mL Pneumac Printhead 000000020356 1
Air adapter connector 10 mL 000000610041 1
3
Technical specicaons
02
4
02 Technical specicaons
• Compable with 10-mL plasc cartridge.
• Dimensions (height x width x depth):
• With screw: 63.5 x 30.5 x 51 mm.
• Without screw: 63.5 x 30.5 x 46.2 mm.
• Weight: 102 g.
• Maximum recommended pressure: 700 kPa.
• Material composion:
• External surfaces: Powder-coated aluminum.
• Internal surfaces: Aluminum.
• Recommended operang temperature: 20-23 degrees Celsius.
NOTE: We recommend operang the BIO X in temperatures between 20 and 23 degrees. In normal operang condions,
the chamber temperature of the BIO X will rise 2-3 degrees above room temperature, and the 10-mL Pneumac Printhead
temperature will rise above the chamber temperature.
5
02 Technical specicaons
• Running temperature (in recommended condions): 26-32 degrees.
• Heang capacity and rate:
• Total heang range: 30-65 degrees.
• Heang rate: Room temperature-40 degrees (10 minutes).
• Heang rate: 40-65 degrees (12 minutes).
• Cooling capacity: N/A.
• Build volume (X, Y, Z): 128 x 85 x (83.4–A) mm; A represents p length.
6
02 Technical specicaons
Figure 1:
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Cellink Accessori per stampanti
