Celsius Viper Manuale utente

2
CONTENTS
SAFETY PRECAUTIONS
ASSEMBLY PACK
EXPLODED DRAWING
COMPLETE BIKE ASSEMBLY
PARTS LIST
ASSEMBLY INSTRUCTION
MONITOR INSTRUCTION
FIRST TIME USER INSTRUCTION
ADJUSTMENT OF THE BIKE
MAINTENANCE
WARRANTY INFORMATION
page 3-4
page 5
page 6
page 7
page 8-11
page 12-15
LCD POWER GENERATING page 16
page 17-20
page 21
page 22
page 23
page 24

IMPORTANT SAFETY INSTRUCTIONS
3
SAFETY PRECAUTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS EXERCISE EQUIPMENT.
1. Close supervision is necessary at all times whenever the equipment is used.
A serious injury could result from the moving components of the exercise system.
2. Keep your hands away from all moving parts and keep your feet on the pedals while
exercising. Do not remove your feet from the pedals while they are in motion.
3. Use this equipment only for its intended use, Do not attempt to ride this bike at high
pedal speeds or in a standing position until you’ve practiced and are comfortable riding.
4. Equipment not to be used by children. Injury may likely occur to young children if exercise
cycles are operated in their vicinity without the properly fitted guards.
5. Do not dismount the bike until both of the pedals and the flywheel are at a complete
stop.
6. Never turn the pedal crank arms by hand. Do not expose your hands or your arms
to the drive mechanism as possible injury could occur.
7. Press down the emergency knob to slow down the flywheel so that pedals do not
rotate freely and cause possible injury.
8. Never drop or insert any object into any opening on the exercise equipment.
The safety level given by the design of this equipment can only be maintained
when the equipment is regularly examined for damage and wear.
Inoperable components should be replaced immediately or the equipment should
be put out of use until it is repaired.
9. Before using the machine, thoroughly inspect the equipment for proper assembly,
equipment condition, fitment of guards and all safety devices.
10. Maintain a clearance of 18 inches in front and to the sides as well as 24 inches to
the rear.
11. This machine was designed for a maximum user weight of 150kg.
12. The machine can only be used by one person at a time. Failure to follow all
guidelines may compromise the effectiveness of the exercise experience, expose
yourself (and possibly others) to injury, and reduce the longevity of the equipment.

4
WARNING
GUIDE LINES FOR SAFE OPERATION
KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. Obtain a complete physical examination from your medical doctor
and enlist a health/fitness professional’s aid in developing an
exercise program suitable for your current health status.
2. The speed and duration of your exercise program should always
be subject to how you feel. Never permit peer pressure to exceed
your personal judgment while exercising.
3. Overweight or severely deconditioned individuals should be
particularly cautious when using the equipment for the first time.
Even though such individuals may not have histories of serious
physical problems, they may perceive the exercise to be far less
intense than it really is, resulting in the possibility of overexertion
or injury.
4. Proper installation and regular maintenance are required to ensure
safety. Maintenance is the sole responsibility of the owner.
THESE GUIDELINES ARE DIRECTED TO YOU, AS THE OWNER OF THIS EXERCISE
EQUIPMENT. YOU SHOULD INSIST THAT ALL USERS FOLLOW THE SAME
GUIDELINES. YOU SHOULD MAKE THIS MANUAL AVAILABLE TO ALL USERS.

PARTS LIST
PART NO. DESCRIPTION QTY
A Computer 1PCS
A-1 Screw 4PCS
B Handlebar post 1PCS
B-1 Sleeve 1PCS
B-2 Screw 1PCS
B-3 Handlebar 1PCS
B-4 Cable 1PCS
B-5 End cap 1PCS
B-6 End cap 1PCS
B-7 screw 1PCS
C Hardware kit 1SET
C-1 Flat washer 8PCS
C-2 Allen Bolt 8PCS
C-3 Allen Key 1PCS
C-4 Screwdriver 1PCS
C-5 Box Spanner 1PCS
C-6 Knob 1PCS
C-7 Flat Washer 1PCS
C-8 Screw 2PCS
D Front stabilizer set 1SET
D-1 Screw Allen Bolt 2PCS
D-2 Roller 2PCS
D-3 Flat washer 2PCS
D-4 Nut 2PCS
D-5 Front stabilizer 1PCS
D-6 Cap for front stabilizer (left) 1PCS
D-7 Cap for front stabilizer (right) 1PCS
D-8 Screw 8PCS
E Small flywheel set 1SET
E-1 Flat washer 1PCS
E-2 Bearing 1PCS
E-3 Bushing 1PCS
E-4 NGP Flywheel 1PCS
E-5 Magnetic(S) 5PCS
E-6 Magnetic(N) 5PCS
E-7 Coil set 1PCS
E-8 Bearing 1PCS
E-9 Cap for stator 1PCS
E-10 Flywheel axle 1PCS
8

PART NO. DESCRIPTION QTY
E-11 Nut 2PCS
E-12 Star washer 2PCS
E-13 Belt 1PCS
E-14 Screw 3PCS
F Main frame accessory Set 1SET
F-1 Nut 2PCS
F-2 Left crank 1PCS
F-3 Left chain cover 1PCS
F-4 Screw 6PCS
F-5 Screw 4PCS
F-6 Left front chain cover 1PCS
F-7 Right front chain cover 1PCS
F-8 Nut 1PCS
F-9 Bearing 2PCS
F-10 Big pulley 1PCS
F-11 Bushing 1PCS
F-12 Axle 1PCS
F-13 Screw 3PCS
F-14 Right chain cover 1PCS
F-15 Right crank 1PCS
F-16L/R Pedal set 1SET
F-17 Cap for flywheel 1PCS
F-18 Bottle Holder M5x14L 1PCS
F-19 Screw for fixing bottle holder M5x14L 2PCS
G Main frame 1SET
G-1 Sleeve for seat post 1PCS
G-2 Battery 1PCS
G-3 Control board 2PCS
G-4 Sensor box 1PCS
G-5 Sensor fix bracket 2PCS
G-6 Screw 1CS
G-7 Knob 1PCS
G-8 Sleeve for handlebar post 1PCS
G-9 End cap 1PCS
G-11 Motor wire 1PCS
G-12 Knob 1PCS
G-13 Battery cover( lower) 1PCS
G-14 Battery cover( upper) 1PCS
G-15 Screw 4PCS
G-16 Cable 1PCS
G-17 Cable 1PCS
G-18 Cable 1PCS
9

G-19 Servo motor set 1PCS
PART NO. DESCRIPTION QTY
G-20 Adjustable shaft of servo motor 1PCS
H Rear stabilizer set 1SET
H-1 Rear stabilizer 1PCS
H-2 Left cap of rear stabilizer 1PCS
H-3 Right cap of rear stabilizer 1PCS
H-4 Adjustable feet of stabilizer 2PCS
J Magnetic set 1SET
J-1 Screw 2PCS
J-2 Spring washer 2PCS
J-3 Flat washer 2PCS
K Belt 1PCS
K-1 Nut 6PCS
K-2 Bearing 2PCS
K-3 Flywheel 1PCS
K-4 Flywheel axle 1PCS
K-5 Adjustable chain set 2PCS
K-6 Cap for flywheel 2PCS
K-7 Screw 6PCS
L Seat rail set 1SET
L-1 End cap 2PCS
L-2 Screw bracket 1PCS
L-3 Flat washer 1PCS
L-4 Knob 1PCS
L-5 Seat post 1PCS
L-6 Seat 1PCS
M Brake knob set 1SET
M-1 Brake knob 1PCS
M-2 Nut 1PCS
M-3 Bushing 1PCS
M-4 Brake shaft 1PCS
M-5 Spring 1PCS
M-6 U type bracket 1PCS
M-7 Brake plate 1PCS
M-8 Bushing 1PCS
M-9 Flat washer 2PCS
M-10 Screw 2PCS
N Idler set 1SET
N-1 Nut 1PCS
N-2 Nut 2PCS
N-3 Adjustable chain 1PCS
N-4 Bushing 1PCS
10
Indice
Altri manuali Celsius Cyclette
























