Centrix Q50 Manuale utente
HDVS IP CAMERA
Q50
User Manual
Table of Contents
1. Overview ................................................................................................................................. 3
1.1 Features ....................................................................................................................... 3
1.2 Package Contents....................................................................................................... 4
1.3 Dimensions .................................................................................................................. 5
1.4 Connectors................................................................................................................... 6
1.5 Cable Denition (Optional)......................................................................................... 7
2. Camera Cabling..................................................................................................................... 8
2.1 Connect Power ............................................................................................................ 8
2.2 Connect Ethernet Cable............................................................................................. 8
3. System Requirements ......................................................................................................... 9
4. Access Camera ................................................................................................................... 10
5. Setup Video Resolution..................................................................................................... 15
6. Conguration Files Export / Import................................................................................ 16
Appendix A: Technical Specications......................................................................................... 17
Appendix B: Delete the Existing DC Viewer ............................................................................... 19
Appendix C: Setup Internet Security........................................................................................... 20
Appendix D: Video Resolution..................................................................................................... 21
Quad Streams......................................................................................................................... 21
Triple Streams ........................................................................................................................ 26
Dual Streams.......................................................................................................................... 29
Single Stream ......................................................................................................................... 30
3
1. Overview
The Fisheye IP Camera is a high resolution surveillance solution featuring 360 Degree
Panorama View that allows users to monitor a wide angle surveillance environment with-
out blind spot with just one Camera. The Camera not only delivers clear images through
multi-streaming video, its lens with up to 5 Mega-pixel high resolution image also pro-
vides panorama function with quad view that enables four different assigned angles im-
ages to display simultaneously for monitoring.
Furthermore, it has built-in IR LED and true day/night IR cut lter for supreme night time
images. With compact outlook and rugged housing, the easy installing and weatherproof
ability offers users to apply the Camera in various kinds of IP surveillance environment
exibly such as hotel, hospital, retailer store, parking lot, and factory, etc.
1.1 Features
Progressive Scan CMOS Sensor
5M resolution
Dual Streams, Full HD 1080P real-time + D1 real-time
Quad Streams support
Quad Streams Compression:
H.264 Baseline / Main / High Prole + MJPEG
360° Panorama View
ePTZ
Quad View
Tampering Alarm
Wide Dynamic Range
Motion Detection
Privacy Masks
Day / Night (ICR)
IR LED Module
Built-in MIC & Speaker
Weatherproof (IP66 International)*
Micro SD support
ONVIF support
(*) Optional
4
1.2 Package Contents
Please check the package contains the following items listed below.
Fisheye IP Camera Self-tapping screws
(×3)
Plastic Anchors
(×3)
Security Screw
(×1)
Security Torx Power Terminal
Block (x1) Quick Guide CD
NOTE: The type of the supplied self-tapping screws is mainly for softer substrate
/ material installation such as wood. For other installation environment such as cement
wall, it is required to pre-drill and use plastic anchors before fastening the supplied self-
tapping screw on the wall.
All In One Cable (Optional)
5
1.3 Dimensions
The IP Camera’s dimensions are shown below.
6
1.4 Connectors
Please remove the security screws and the cover to reach the connectors.
The diagram below shows the IP Camera’s connectors and reset button. Denition for
each will be given as follows.
No. Connector Pin Denition Remarks
1 Power*
DC 12V
1 Power
Power connection
2 Reserved
3GND
AC 24V
1 Power-1
2Earth GND
3 Power-2
2 RJ-45 -10/100 Mbps Ethernet / PoE
3Alarm & Audio I/O* -Please refer to the Alarm & Audio I/O in the table un-
der Cable Denition
4Reset Button -
Restore to default setting
Press the button with a proper tool
5Micro SD Card Slot - For video recording storage
*All in One Cable is required for Power, Alarm and Audio I/O utilization.
7
1.5 Cable Denition (Optional)
No. Connector Pin Denition Remarks
1Audio I/O
Pink Line In
Two-way audio transmission
Green Line Out
2
Alarm
(4-Pin Terminal Block)
1ALM_IN –
Alarm connection
2ALM_IN +
3ALM_OUT –
4ALM_OUT +
3
Power DC Jack - DC 12V Power connection
Power Wires
Red AC 24V (+) Remove DC Jack connec-
tor head, and apply AC 24V
with Red and Black wires (as
shown in the diagrams below).
Black AC 24V (–)
4Alarm & Audio I/O
1GND
Two-way audio transmission /
Alarm connection
2 Line In
3Line Out
4 -
5ALM_IN –
6ALM_IN +
7ALM_OUT –
8ALM_OUT +
5 Power Wires
Red
DC 12V (+) /
AC 24V (+) Power connection
Black
DC 12V (–) /
AC 24V (–)
8
2. Camera Cabling
Please follow the instructions below to complete IP Camera connection.
2.1 Connect Power
Please refer to Section: Connectors. Alternatively, connect the Ethernet cable to the
camera’s RJ-45 port and plug the other end of the cable into a PoE switch.
NOTE: If PoE is used, make sure Power Sourcing Equipment (PSE) is in
use in the network.
2.2 Connect Ethernet Cable
Use of Category 5 Ethernet cable is recommended for network connection; to have best
transmission quality, cable length shall not exceed 100 meters. Connect one end of the
Ethernet cable to the RJ-45 connector of the IP Camera, and the other end of the cable
to the network switch or PC.
NOTE: In some cases, Ethernet crossover cable might be needed when
connecting the IP Camera directly to the PC.
Check the status of the link indicator and activity indicator LEDs. If the LEDs are unlit,
please check LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light ashes for network activity indication.
9
3. System Requirements
To perform the IP Camera via web browser, please ensure the PC is in good network
connection, and meet system requirements as described below.
Items System Requirement
Personal Computer
Minimum :
1. Intel® Core™ i5-2430M @ 2.4 GHz
2. 4 GB RAM
Recommended:
1. Intel® Core™ i7-870 @ 2.93 GHz
2. 8 GB RAM
Operating System Windows VISTA / Windows XP / Windows 7
Web Browser Microsoft Internet Explorer 6.0 or later
Firefox
Chrome
Safari
Network Card 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
Viewer ActiveX control plug-in for Microsoft IE
10
4. Access Camera
For initial access to the IP Camera, users can search the camera through the installer
program: DeviceSearch.exe, which can be found in “DeviceSearch” folder in the sup-
plied CD.
Device Search Software Setup
Step 1: Double click on the program Device Search.exe. After its window appears,
click on the <Device Search> button on the top side.
Step 2: The security alert window will pop up. Click on <Unblock> to continue.
Device Search
Step 3: Click on <Device Search> again, and all the nding IP devices will be listed in
the page. The IP Camera’s default IP address is: 192.168.0.250.
Step 4: Double click or right click and select <Browse> to access the camera directly
via web browser.
Step 5: Then the prompt window of request for entering default username and
password will appear for logging in to the IP Camera.
The default login ID and password for the Administrator are:
Login ID Password
admin admin
NOTE: ID and password are case sensitive.
NOTE: It is strongly advised that administrator’s password be altered for
the security concerns. Refer to Full HD Multiple Streams IP Camera Menu Tree
for further details.
Indice
Altri manuali Centrix Telecamera IP
