Channel Vision A0316 Manuale utente

A0316

iBus Wall-Dock for Distributed Audio

with RS-232 Control

Features:

!Supports IR control: compatible with A0505 or Apple Remote

!RS-232 interface for use with advanced control systems

!Built-in IR receiver

!Charges the iPod

!Allows viewing of iPod videos on a TV

!Mounts in a standard 2-gang box

The A0316 is an on-wall iPod docking station that supports RS-232 and

IR control. The dock connector slides in and out to adjust for any iPod and

the non-skid pad helps to hold the music player in place. It’s elegant and

contemporary design make the A0316 perfect for anyone who wants to

enjoy their music without defacing their wall.

Front/Top Front/Bottom

Wall Dock

Sliding Dock Platform

Slides up to conceal

the dock connector

Non-Skid Pad

Secures the iPod

Sliding Dock Lever

Slides the dock connector forward, providing

easy access to dock your iPod

RJ-45 & 110 Connectors

Connect to output wall plate via

CAT5 cable (only use one)

Composite Video Output

Outputs video signals from the iPod

Use RG59U coax or CAT5 and a video balun

(Suggested balun model B201 CAT5 video balun)

Slide Up

Hinged Dock Lid

Rotates down to

cover the dock

connector

Dock Connector

Connects to iPod

Output Wall Plate

Audio Outputs

Connect to your

amplifier.

Installing the Trim Plate Accessory

Serial Connector

RS-232 interface

provides advanced

control and feedback.

Install Output

wall plate in j-box

Install Trim plate chassis

over output wall plate

Snap front cover

over chassis

Snap side flange on

to front cover

Snap trim

into place

IR Input

Connect an IR

receiver and use

the A0505 remote

to control your iPod.

RJ-45 & 110

Connectors

Receive signals

from the wall dock

via Category 5 or

Category 6 cable.

Back

Front

Made For:

!iPod touch (2nd generation)

!IPod touch (1st generation)

!iPod classic

!iPod video

!iPod nano (5th generation)

!iPod nano (4th generation)

!iPod nano (3rd generation)

!iPod nano (2nd generation)

!iPod nano (1st generation)

!iPod mini

!iPod with dock connector

Compatibility

Basic Application

HDTV Plasma with speakers

Whole-House Audio System

IR receiver

(optional)

Serial Control Automation:

Control4 driver available from

Extravegetables.com

Pwr.

Note: An IR emitter output

from a whole-house IR system

can also be connected here.

As shown on the

following page.

A0505

Remote

A0505

Remote Control

CAT5 cable up to 350ft.

A0316 Wall Dock

A0316 Output Wall Plate

Front

Rear

Front

TV or Video Display

Video Output

The built-in IR receiver

allows the A0316 to be

controlled directly by

the A0505.

CHANNEL VISION

ZO E

POWER

MUTE

CAMERA

CATV

MOD

VOL

MODEL

A0505

POWER

AEO

HNN L

ISI N

ZONE

POWER

MUTE

ATVC

OM D

VOL

MODEL

A0505

POWER

6Control 54Control 32Control 1

4®

Serial

IR Emitters

654321FOR HOME OR OFFICE USE

Channel Vision A4623

Tested To Comply

With FCC Standards

CAUTION

FUSE

115

Control

Control 54

Control

Control 32

Control

Control 1

VIDEOR-AUDIO-L

Serial

Link

IR Emitters

Warning:

To prevent fire or shock hazard do not expose this unit to

rain or moisture.

654321

FOR HOME OR OFFICE USE

Channel Vision A4623

Tested To Comply

With FCC Standards

1234

Hi-Z

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

+ R - - L ++ R - - L ++ R - - L ++ R - - L ++ R - - L ++ R - - L +

POWER

Input Voltage

50/60 Hz MAX 115W

230/115V

FUSE

T3.15AL/250V 115VAC

IR signals detected by the A0127

keypad will be repeated back to

the A4623. This allows control

of the input sources.

The single-gang trim plate can be

used to hold a single-gang keypad

next to the iPod dock in a 3-gang

junction box. See installation section

for details.

Sample Wiring Diagram:

When used with the A4623

DVD player

A4623 Rear Panel

CD player

Connect an IR emitter output into the

“IR in” of the A0316 output wall plate.

Power supply

not shown

RG59U

or RG6

IR-4180

RG59U

or RG6

CAT5

TV or Video Display

LII

HANNE

SON

PWER

MUTE

CERA

MOD

VOL

ODL

05A05

POWER

Installing the Wall Dock

Installation Steps

1. Connect all wiring.

2. Attach main chassis to j-box using

the provided four 6-32 screws.

3. Feed the dock connector circuit

board through the opening in the

front cover.

4. Hang the front cover on the main

chassis from the two top tabs.

5. Secure the front cover with the

two small screws at the bottom.

6. Place the dock platform over

the slide rail and push

downward until the retention

snaps are engaged.

7. Slide the side protectors

into the slots on the main

chassis.

Completed Installation

Steps 3 & 4 complete

Steps 5 & 6 complete

Retention

Snap

Slide Rail

Installing the Wall Dock

Installation Steps

1. Connect all wiring. Use the correct

installation tools: J-110 tool, or

1014 crimp tool.

2. Install keypad and single-gang

trim plate in the far left position

of the 3-gang junction box.

(See details on page 3)

3. Leave off the right side

flange and trim piece.

4. Install the iPod dock in the

left side of the 3-gang j-box.

It will overlap and snap into

the single gang trim plate.

(See page 5 for details)

In some installations it may be desirable to mount a single gang control

keypad next to the A0316. To accomplish this, the single gang trim plate

can be installed next to the A0316 in a 3-gang junction box.

Follow the steps below:

Completed Installation

See attachment

detail on previous page

Docking the iPod

The dock platform can slide up to hide

the dock connector when the system is

not in use. Make sure the dock platform

is in the down position so the dock

connector is exposed (as shown here).

The sliding dock lever beneath the dock adjusts the position of the

dock connector to create a perfect fit for all compatible iPods (see

page 3 for a list of compatible iPods).

CHANNEL VISION

ZONE

POWER

MUTE

CAMERA

CATV

MOD

VOL

MODEL

A0505

POWER

We realize that custom integrators way wish to design advanced control systems. To

provide assistance we have published the hex codes for the IR commands (see below).

(IR codes can be downloaded at: www.channelvision.com)

Hex codes for IR commands:

iBus Play/Pause:

0000 006D 0000 000B 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F

003F 001F 001F 001F 001F 003F 003F 003F 001F 0CA2

iBus Skip <<:

0000 006D 0000 000B 001F 001F 003F 001F 001F 003F 001F 001F 001F 001F 001F 001F

003F 001F 001F 003F 001F 001F 003F 003F 001F 0CA2

iBus Skip >>:

0000 006D 0000 000A 001F 001F 001F 001F 003F 003F 001F 001F 001F 001F 001F 001F

003F 003F 003F 001F 001F 003F 003F 0CC3

Using the A0505 Remote Control

The buttons above the iBus

label on the A0505 remote

control will mimic the

functions on the iPod wheel.

The volume, mute, power, and source buttons

on the A0505 are designed to control Channel

Vision’s whole-house audio systems such as

the A4603 and P-1044.

Please note that this remote will only function

when your iPod is docked in the A0316 wall

dock. It can be pointed directly at the wall

dock or at an IR receiver that is part of an

external whole-house IR system. An IR-4180

cable can be used to connect the emitter

output of the whole-house IR system into the

IR IN of the A0316 output wall plate. See page

5 of this manual for an example.

A0316 Serial Protocol

RS-232 Control Code:

For more complex installations, the A0316 supports RS-232 making it well

suited for use with automation systems. Baud Rate: 57600, 8N1 (8-Bit Data,

No Parity, 1 Stop Bit)

The checksum is calculated by adding the bytes together as signed 8-bit

values, discarding any signed 8-bit overflow, and then negating the sum to

create the signed 8-bit checksum byte.

When calculating the checksum of iPod responses, the sum of all the bytes

from the packet payload length to and including the packet payload checksum

is 0x00.

When calculating the checksum of commands issued to the iPod, the sum of

ALL bytes, including the “A36” prefix, as well as the checksum is 0x00.

Responses in the Special Lingo are also calculated in this way.

NOTE: to issue commands without calculating a checksum, you can use the

ASCII lowercase ‘z’ (0x7A) as a wildcard checksum value.

There are two possible responses generated when a command is received:

#(0x23) - This acknowledges that the command was received and it had a

valid check sum.

Y(0x59) - This means there was a length error with the command.

ZZZ(0x5A) - This means that the command was not understood. It could also

mean that the check sum was not valid.

Serial Cable Pin Out

A0316 RS-232 Pins

DB-9P, Female

PC RS-232 Pins

DB-9P, Male

Message Payloads are shown in italics: 1 2 3 4 5 ... are represent a HEX byte,

followed by [cs] = Check Sum. All understood commands will elicit a ‘#’ (0x23)

acknowlegement, which is not shown in the tables below. Other commands will

also elicit an additional response in the form of a “Return” command.

The format of responses is as follows:

# {Length} {Lingo} {CommandID} {Message} {Checksum} {Carriage Return} {Line Feed}

Acknowledge the command was received

Length of the response, which measures the Lingo, Com ID, and the Message.

The iPod Lingo

Com ID

Message from the iPod

Checksum value

HEX 0D

HEX 0A

Altri manuali per A0316

Altri manuali Channel Vision Stazione di attracco

Channel Vision

Channel Vision A0317 Manuale utente

Channel Vision

Channel Vision A0314D Manuale utente

Channel Vision

Channel Vision A0602 Manuale utente

Channel Vision

Channel Vision A0602 Manuale utente

Channel Vision

Channel Vision iBus A0314 Manuale utente

Channel Vision

Channel Vision A0316 Manuale utente

Channel Vision

Channel Vision iBus A0312 Manuale utente

Channel Vision

Channel Vision AB-315 Manuale utente

Channel Vision

Channel Vision IBUS A0315 Manuale utente

Channel Vision

Channel Vision AO320 Manuale utente

Channel Vision

Channel Vision iBus A0313 Manuale utente

Channel Vision

Channel Vision AB-315 Manuale utente

Channel Vision

Channel Vision A0318 Manuale utente

Channel Vision

Channel Vision IBUS A0315 Manuale utente

Channel Vision

Channel Vision AB-318 Manuale utente

Channel Vision

Channel Vision AB-313 Manuale utente

Channel Vision

Channel Vision P-3036 Manuale utente

Channel Vision

Channel Vision iBus AB-311 Manuale utente

Manuali Stazione di attracco popolari di altre marche

Sony

Sony Dream Machine XDR-DS12iP Manuale utente

Acer

Acer USB Type-C Dock II Manuale utente

ATEN

ATEN UC-2000 Manuale utente

Xcellon

Xcellon HDD-202 Manuale utente

Dok

Dok CR09 Manuale utente

Philips

Philips BTM630/12 Manuale utente

IOGear

IOGear Travel Pro GUD3C09 Manuale utente

RKI

RKI SDM-E2 Manuale utente

iHome

iHome iP15 Manuale utente

VITURE ONE

VITURE ONE MOBILE DOCK Manuale utente

Lindy

Lindy 42984 Manuale utente

CipherLab

CipherLab 8001 Manuale utente

Pyle

Pyle PIPDSP2 Manuale utente

Avol

Avol AS2350 Manuale utente

Datalogic

Datalogic JoyaTouch Manuale utente

Philips

Philips DC190/79 Manuale utente

Targus

Targus DOCK315EUZ Manuale utente

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manuale utente