Chazelles A5CN Guida rapida

A5CN –A6 –A8 (Rev. 01/06/2012) ENG 1

Installation and instruction manual,

Pellet stoves

Mod. A5CN –A6 –A8

2 ENG A5CN –A6 –A8 (Rev. 01/06/2012)

DIMENSIONS

AMANDINE, ADELAIDE, ADELE:

ALESSIA, ANTONELLA, AXELLE:

ALEYNA, ARMELLE, ALINE:

A5CN –A6 –A8 (Rev. 01/06/2012) ENG 3

A = 200 mm

B = 300 mm

C = 800 mm

D = 500 mm

E = 300 mm

D C

4 ENG A5CN –A6 –A8 (Rev. 01/06/2012)

D C

A = 200 mm

B = 300 mm

C = 800 mm

D = 500 mm

E = 300 mm

A5CN –A6 –A8 (Rev. 01/06/2012) ENG 5

D C

A = 200 mm

B = 300 mm

C = 800 mm

D = 500 mm

E = 300 mm

6ENG A5CN –A6 –A8 (Rev. 01/06/2012)

Dear Customer,

Thank you for choosing one product from our range and we hope you will be fully satisfied.

1. All stoves belongs to the A5, A6 and A8 series (product family identification code) have been build with high

gauge steel (up to 3 and 4 mm for the combustion chamber) of the best quality, and materials like vermiculite

(skamolex) for the inner part of the combustion chamber. This gives a clear vision of the stove but also shows a great

heat resistance and allowed us to gain significant levels of heat output as well as very low gas emission levels

2. For the electric and electronic components, the best suppliers on the European market have been selected. The

main board, actually the heart the stove, has been developed by the market leader with over 1.000.000 parts on the

market.

3. Other components like smoke exhaust motors, pellet loading system and hot air fans have been selected with the

same concept: only the best available on the market. For exemple, for the pre-heater we could use a cheaper

component but we decided to install a double jacket. This gives us the possibility to install the pre-heater right there

in the fireplace, where the pellet is. Why? To get a fast and safe starting of the stove!

4. On the top of all other checks, electric and for single components, we have added the “FINAL FIRE CONTROL”, a

check we already run since over 10 years for all or gas stoves. At the end of the production we do connect and fire all

stoves and thanks to a special electronic control, do simulate all the typical conditions like in your everyday use. In

this way we make 100% sure each single stove is working 100%.

In other words, we have realized the first “noiseless” stove – plus the A5 one that doesn’t have the ventilation fan -:

all A6 and A8 models are fitted with a special function to switch the vent fan off and run the stove like a natural

convention one

You can program the heating in your house but switch the fan off when getting home at the evening and enjoy in

silence the pleasure of the fire.

All models are fitted with the external air inlet in line with the pre-heater. The outside air is getting warmed in the fire

pot but a part is used to keep the glass door clean. This makes the stove tight and ideal to be installed in class A or

BBC houses.

How could we get this result? First of all by choosing reliable top quality components and, last but not least, adopting

a high sophisticated construction technology. Our target hasn’t been the price but the care of the quality. On the top

of that, our 25 years heating system manufacturing experience and a two years intensive developing program of a

French –Italian technical team. The most innovative pellet stove nowadays available on the market is the result.

Our exclusive overpressure valve is your guarantee for safety even when using not approved pellet quality or

chimney which doesn’t work properly.

How to lock and unlock the remote control keypad:

key 7 and right after key 3 .

A5CN –A6 –A8 (Rev. 01/06/2012) ENG 7

Index ENG

1. IMPORTANT INFORMATIONS ERREUR ! SIGNET NON DEFINI.

2. SAFETY ERREUR ! SIGNET NON DEFINI.

3. HANDLING AND STOCKING ERREUR ! SIGNET NON DEFINI.

4. AUTHORIZED FUEL ERREUR ! SIGNET NON DEFINI.

5. NON AUTHORIZED FUELS ERREUR ! SIGNET NON DEFINI.

6. STOVE DESCRIPTION 10

7. INSTALLATION ERREUR ! SIGNET NON DEFINI.

8. LOCATION OF THE STOVE ERREUR ! SIGNET NON DEFINI.

9. THE SMOKESTACK ERREUR ! SIGNET NON DEFINI.

10. CONNECTING TO THE EXISTING SMOKESTACK 12

11. ALLOWED INSTALLATIONS 14

12. NOT ALLOWED INSTALLATIONS (IN ITALY) 15

13. PASSING THROUG FLAMABLE CEILING 15

14. CONNECTING TO THE EXTERNAL AIR INLET 15

15. ELECTRICAL CONNECTION 16

16. REMOTE CONTROL INSTRUCTIONS 17

17. LIST OF MENUS 18

18. MENU 02 - DAY AND TIME SETTING 19

19. MENU 03 - SET WALL THERMOSTAT 19

20. MENU 04 –SELECT LANGUAGE 21

21. MENU 05 –SET ROOM TEMPERATURE PROBE 21

22. MENU 06 –STAND BY OR STOP&GO 22

23. MENU 07 –BEEPER 22

24. MENU 08 –FIRST PELLET LOADING 22

25. MENU 09 –STOVE STATUS 23

26. MENU 10 –SERVICE SETTINGS 23

27. MENU 11 –DEALER SETTINGS 23

28. MENU 12 –FAN ENABLE (ONLY FOR A6 AND A8 MODEL) 23

29. STOVE STARTING 23

30. ROOM TEMPERATURE SETTING 24

31. POWER SETTING 24

32. SWITCHIN STOVE OFF 24

33. REMOTE CONTROL FREQUENCY SETTING 25

34. REMOTE CONTROL LINKING 25

35. HOW TO USE THE REAR CONTROL PANEL (IN EMERGENCY ONLY) 26

36. FIRST STARTING 27

37. MAINTENANCE AND CLEANING 28

38. ELECTRICAL DIAGRAM 29

39. TROUBLESHOOTING 30

40. MOUNTING LATERAL CERAMIC 32

41. GUARANTEE 34

8ENG A5CN –A6 –A8 (Rev. 01/06/2012)

1. IMPORTANT INFORMATIONS

This instruction manual belongs to the pellet stove and is delivered with it. The stove is delivered with this manual,

the relevant plant booklet and the guarantee form. Please do carefully read this instruction manual before installing

and starting the stove. Save all the a.m. documents because they are integral parts of the stove.

CAUTION: This warning symbol located in various parts of this book, indicates

that if you don’t follow the intructions of what is written, it can cause serious

damages to the product and endanger the safety of those users.

For safety reasons, it is very important to always follow instructions when maintaining the stove.

All the local, regional, National and European regulations have to be satisfied when using

this stove.

The packaging does protect your stove. However, during transport, the stove could get damaged. Therefore, we

kindly ask you to carefully check the stove and its components. A damaged stove - or in case of missing component

–should not be installed. Please get immediately in touch with your dealer.

2. SAFETY

Attention: the glass is very hot !!!! Do not leave kids near the stove!!!

Do not leave curtains, clothes, dish closes, furniture or other material on or near to the stove. Do respect the safety

distances.

After installing the stove let it burn at an average power (power 3).

Ventilate the room and carefully supervise the stove. During this time, all paints and assembling material will dry out.

The light smoke that could develop will rapidly fade away.

Regular maintenance and cleaning are essentials for the stove proper working and lasting. Check for craked or

broken glasses. In case, replace immediately.

Your stove has been developed for using a well defined fuel. Specification for the ideal fuel is shown in the next

chapter. In case of use of different or not allowed fuels, your stoves can get shortly damaged.

The remote control does integrate a probe and you can set the desired temperature for the room where the remote is

located. The range is 7 to 8 meters depending on the architecture of the building. We suggest not placing it close to

the stove. All side walls and the top of the stove are getting very hot. Do not leave there the remote because it will be

damaged.

Always use original parts for the guarantee. It is not allowed to modify in any way the stove.

Basic safety rules:

General Indications:

- Never use water for extinguishing a stove.

- The glass and other parts of the stoves are extremely hot and could be very dangerous for kids

- Through the glass, there is a radiant heat, don’t put flammable materials, heat sensitive objects or people at less

than 80 cm by 180°.

- Don’t leave flammable materials near to the stove.

- Never run the stove when the ashtray is out

- When cleaning the ash tray and burning pot, put all rests in a metallic container and wait at least 48 hours before

discarding it in order to prevent fire cases.

After sale service

We recommend you to always order only original spare parts directly supplied by the stove manufacturer otherwise

the guarantee will decline.

The manufacturer is not responsible for maintenance and cleaning operations made unaccordingly with this manual.

A5CN –A6 –A8 (Rev. 01/06/2012) ENG 9

3. HANDLING AND STOCKING

The cardboard/wood package has been designed to protect the

stove but cannot be stocked outside or in very damp places. It

must be exposed to the elements, otherwise some components

or the stove itself could get damaged and the guarantee will

decline. As stoves have some fragiles parts like glasses and

electronic components, it should be handled following few basic

rules:

Lift and lay down the stove gently. In case you use a two wheels

trolley or when transporting upstairs, always take the stove at the

side opposite to the glass (which is identified by a sticker). The

glass is always placed on the sticker side.

4. AUTHORIZED FUEL

Pellet is produced with wood rests from clean wood machining like sawmills, furniture manufacturing or new wood

from forest culture. All these 100% vegetable materials are dried and pressed into the pellet form without adding any

kind of glue or chemical. We do approve to be used in our stoves all pellets that satisfy the European regulation EN

14961-2. All the approved pellets must carry the following logo:

New logo since 2011

Typical specifications for the approved fuel:

.caloric capacity (in MJ/kg) (2*)

. ≥ 17,6 MJ/kg

.caloric capacity (in KWh/kg) (2*)

≥ 4,9 KWh/kg

.caloric capacity (in Kcal/kg) (3*)

≥ 4.223 Kcal/kg

..density

..1,12 kg/dm3

..water content

..mass. 10,0 %

..ash content

..mass. 0,5 %

..length

..mass. 30 mm

..diameter

5- 6 mm

..thin material (rests)

..mass. 2,3% (1*)

..composition

..natural wood

If using a low quality fuel, the stove could possibly work not properly and can lead the guarantee to decline.

The uses of low quality pellet leads to:

- Shorter cleaning intervals

- Higher fuel consumption

- Lower output

- Glass getting quickly dirty

- Fire pot and exhaust smoke connection will clog up rapidly

5. NON AUTHORIZED FUELS

All pellet types that doesn’t satisfy the a.m. indications..

10 ENG A5CN –A6 –A8 (Rev. 01/06/2012)

6. STOVE DESCRIPTION

Remote control

Flap door for

charge pellet

Protection grid

Fire pot

Air-glass cleaning

Fire pot support

Ashtray

Flap door inspection

lower smoke chamber

Inner glass ceramic

Closing door

Door

Charge pellet in fire pot

Interior in skamolex

Convection air outlet

Overpressure security valve

Handle opening door

Make sure the power supply is always available

Rear control panel

Room temperature probe Wall thermostat connecting

Air inlet for combustion

(chose one of two solutions)

Fuses

Electrical connection

On / Off switch

Smoke piping

Starting resistance

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali chazelles Stufa

chazelles

chazelles A6LB Guida rapida

Manuali Stufa popolari di altre marche

Arada

Arada Cassette Stove Manuale utente

Parmco

Parmco FS 600 Manuale utente

MCZ

MCZ SUITE AIR 10 M2 Manuale utente

HearthStone

HearthStone Stowe DV 8321 Guida alla risoluzione dei problemi

Cattara

Cattara FAMILY Manuale utente

Stanley

Stanley Argon F500 OVAL Manuale utente

Avalon

Avalon B-VENT Manuale utente

Nordpeis

Nordpeis Vega Manuale utente

Exquisit

Exquisit EKC601-5 Manuale operativo

Stanley

Stanley Oisin Oil MK II Manuale del proprietario

Thermocet

Thermocet Brookfield S/CC Manuale utente

HASE

HASE delhi Manuale utente

Vermont Castings

Vermont Castings Intrepid 2 Manuale utente

Italiana Camini

Italiana Camini CLASSICA Guida rapida

Avalon

Avalon Vashon Avanti DVS FS Manuale utente

Spartherm

Spartherm ambiente a1 Manuale utente

Dimplex

Dimplex MCFSTV12AU Manuale utente

Warmlite

Warmlite WL46040 Manuale utente

chazelles A5CN Guida rapida

Manuali Stufa popolari di altre marche