chazelles A6LB Guida rapida
Installation and instruction manual,
Pellet stoves
Mod. A6LB –A10 –A10C –A13C
This manual is part of the supply
2A6LB –A10 –A10C –A13C (Rev. 01/08/2012)
DIMENSIONS
ASTRID, ANDREA:
ANGELINE, ALMA:
AGATHA, ALIZEE:
AMBRE, ANNA:
4A6LB –A10 –A10C –A13C (Rev. 01/08/2012)
6A6LB –A10 –A10C –A13C (Rev. 01/08/2012)
8ENG A6LB –A10 –A10C –A13C (Rev. 01/08/2012)
Dear Customer,
Thank you for choosing one product from our range and we hope you will be fully satisfied.
1. All stoves belonging to the A6LB, A10, A10C and A13 series (product family identification code) have been build
with high gauge steel (up to 3 and 4 mm for the combustion chamber) of the best quality, and materials like
vermiculite (skamolex) for the inner part of the combustion chamber. This give a clear outlook to the stove but also
shows a great heat resistance and allows us to gain significant levels of heat output as well as very low emission
levels
2. For the electric and electronic components the best suppliers on the European market have been selected. The
main board, actually the heart of the stove, has been developed by the market leader with over 1.000.000 parts on
the market.
3. Other components like smoke exhaust motors, pellet loading system and hot air fans have been selected with the
same concept: only the best available on the market. As an example, for the pre-heater, we decided to install a
double jacket. This gives us the possibility to install the pre-heater right there in the fireplace, where the pellet is.
Why? To get a faster and safer starting of the stove!
5. On the top of all other checks, electric and for single components, we have added the “FINAL FIRE CONTROL”.
At the end of the production we do connect and fire all stoves and, thanks to a special electronic control, we simulate
all the typical conditions like in your everyday use. In this way we make 100% sure that each single stove is working
100%.
In a series of stoves from exceptional strength, capable of up to 13kW of power and get up to 70 hours continuously!
You can program the heating in your house but switch the fan off when getting home at the evening and enjoy in
silence the pleasure of the fire.
All models are fitted with the external air inlet in line with the pre-heater. The outside air is getting warmed in the fire
pot but a part is used to keep the glass door clean. This makes the stove tight and ideal to be installed in class A or
BBC houses.
How could we get this result? First of all by choosing reliable top quality components and, last but not least, adopting
a high sophisticated construction technology. On the top of that, our 25 years heating system manufacturing
experience and a two years intensive developing program of a French –Italian technical team. The most innovative
pellet stove nowadays available on the market is the result of this cooperation…
How to lock and unlock the remote control keypad:
key 7 and right after key 3 .
A6LB –A10 –A10C –A13C (Rev. 01/08/2012) ENG 9
Index ENG
1. IMPORTANT INFORMATIONS 10
2. SAFETY 10
3. HANDLING AND STOCKING 11
4. AUTHORIZED FUEL 11
5. NON AUTHORIZED FUELS 11
6. STOVE DESCRIPTION A6LB –A10 TYPE 12
6. STOVE DESCRIPTION A10C –A13C TYPE CONVEYED AIR 13
7. INSTALLATION 13
8. LOCATION OF THE STOVE 14
9. THE SMOKESTACK 14
10. CONNECTING TO THE EXISTING SMOKESTACK 15
11. ALLOWED INSTALLATIONS 17
12. NOT ALLOWED INSTALLATIONS (IN ITALY) 18
13. PASSING THROUG FLAMABLE CEILING 18
14. CONNECTING TO THE EXTERNAL AIR INLET 19
15. ELECTRICAL CONNECTION 19
16. REMOTE CONTROL INSTRUCTIONS 20
17. LIST OF MENUS 21
18. MENU 02 - DAY AND TIME SETTING 22
19. MENU 03 - SET WALL THERMOSTAT 22
20. MENU 04 –SELECT LANGUAGE 24
21. MENU 05 –SET ROOM TEMPERATURE PROBE 24
22. MENU 06 –STAND BY OR STOP&GO 25
23. MENU 07 –BEEPER 25
24. MENU 08 –FIRST PELLET LOADING 25
25. MENU 09 –STOVE STATUS 26
26. MENU 10 –SERVICE SETTINGS 26
27. MENU 11 –DEALER SETTINGS 26
28. MENU 12 –FAN ENABLE (ONLY FOR A6 AND A8 MODEL) 26
29. STOVE STARTING 26
30. ROOM TEMPERATURE SETTING 27
31. POWER SETTING 27
32. SWITCHIN STOVE OFF 27
33. REMOTE CONTROL FREQUENCY SETTING 28
34. REMOTE CONTROL LINKING 28
35. HOW TO USE THE REAR CONTROL PANEL (IN EMERGENCY ONLY) 29
36. FIRST STARTING 30
37. MAINTENANCE AND CLEANING 31
38. ELECTRICAL DIAGRAM 32
39. TROUBLESHOOTING 33
40. MOUNTING LATERAL CERAMIC 35
41. DUCTED HEATER OPERATION 37
41. GUARANTEE 38
10 ENG A6LB –A10 –A10C –A13C (Rev. 01/08/2012)
1. IMPORTANT INFORMATIONS
This instruction manual belongs to the pellet stove and is delivered with it. The stove is delivered with this manual,
the relevant plant booklet and the guarantee form. Please do carefully read this instruction manual before installing
and starting the stove. Save all the a.m. documents because they are integral parts of the stove.
CAUTION: This warning symbol located in various parts of this book, indicates
that if you don’t follow the intructions of what is written, it can cause serious
damages to the product and endanger the safety of those users.
For safety reasons, it is very important to always follow instructions when maintaining the stove.
All the local, regional, National and European regulations have to be satisfied when using
this stove.
The packaging does protect your stove. However, during transport, the stove could get damaged. Therefore, we
kindly ask you to carefully check the stove and its components. A damaged stove - or in case of missing component
–should not be installed. Please get immediately in touch with your dealer.
2. SAFETY
Attention: the glass is very hot !!!! Do not leave kids near the stove!!!
Do not leave curtains, clothes, dish closes, furniture or other material on or near to the stove. Do respect the safety
distances.
After installing the stove let it burn at an average power (power 3).
Ventilate the room and carefully supervise the stove. During this time, all paints and assembling material will dry out.
The light smoke that could develop will rapidly fade away.
Regular maintenance and cleaning are essentials for the stove proper working and lasting. Check for craked or
broken glasses. In case, replace immediately.
Your stove has been developed for using a well defined fuel. Specification for the ideal fuel is shown in the next
chapter. In case of use of different or not allowed fuels, your stoves can get shortly damaged.
The remote control does integrate a probe and you can set the desired temperature for the room where the remote is
located. The range is 7 to 8 meters depending on the architecture of the building. We suggest not placing it close to
the stove. All side walls and the top of the stove are getting very hot. Do not leave there the remote because it will be
damaged.
Always use original parts for the guarantee. It is not allowed to modify in any way the stove.
Basic safety rules:
General Indications:
- Never use water for extinguishing a stove.
- The glass and other parts of the stoves are extremely hot and could be very dangerous for kids
- Through the glass, there is a radiant heat, don’t put flammable materials, heat sensitive objects or people at less
than 80 cm by 180°.
- Don’t leave flammable materials near to the stove.
- Never run the stove when the ashtray is out
- When cleaning the ash tray and burning pot, put all rests in a metallic container and wait at least 48 hours before
discarding it in order to prevent fire cases.
After sale service
We recommend you to always order only original spare parts directly supplied by the stove manufacturer otherwise
the guarantee will decline.
The manufacturer is not responsible for maintenance and cleaning operations made unaccordingly with this manual.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali chazelles Stufa
