Checkpoint 6000 Series Manuale utente

[Classification: Protected]

12 August 2020

6000 AND 7000

APPLIANCES

QS-15, QM-30, QS-2, QM-1, QM-2, QM-35

Getting Started Guide

Check Point Copyright Notice

distributed under licensing restricting their use, copying, distribution, and decompilation. No part

of this product or related documentation may be reproduced in any form or by any means

without prior written authorization of Check Point. While every precaution has been taken in the

preparation of this book, Check Point assumes no responsibility for errors or omissions. This

publication and features described herein are subject to change without notice.

RESTRICTED RIGHTS LEGEND:

Use, duplication, or disclosure by the government is subject to restrictions as set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS

252.227-7013 and FAR 52.227-19.

TRADEMARKS:

Refer to the Copyright page for a list of our trademarks.

Refer to the Third Party copyright notices for a list of relevant copyrights and third-party licenses.

6000 and 7000 Appliances Getting Started Guide

6000 and 7000 Appliances Getting Started Guide|3

Important Information

Latest Software

We recommend that you install the most recent software release to stay up-to-date

with the latest functional improvements, stability fixes, security enhancements and

protection against new and evolving attacks.

Certifications

For third party independent certification of Check Point products, see the Check

Point Certifications page.

Check Point 6000 and 7000 Appliances

For more about this release, see the home page.

Latest Version of this Document in English

Open the latest version of this document in a Web browser.

Download the latest version of this document in PDF format.

Feedback

Check Point is engaged in a continuous effort to improve its documentation.

Please help us by sending your comments.

6000 and 7000 Appliances Getting Started Guide

6000 and 7000 Appliances Getting Started Guide|4

Revision History

Date Description

12 August 2020 Updated information in "Mounting the Appliances in a Rack" on page27

10 August 2020 Improved HTML formatting and layout

30 April 2020 Updated information for 6400, 6700, and 7000 appliances

14 January 2020 Updated information for 6200, 6600, and 6900 appliances

22 January 2019 First release of this document

Table of Contents

6000 and 7000 Appliances Getting Started Guide|5

Table of Contents

Safety, Environmental, and Electronic Emissions Notices 7

Compliance Information 11

Declaration of Conformity for 6000 and 7000 Appliances 11

Remarques relatives à la sécurité, l'environnement et les émissions électroniques 16

Hinweise zu Sicherheit, Umwelt und elektronischen Emissione 20

Introduction 24

Welcome 24

6000 and 7000 Series Appliance Overview 24

Shipping Carton Contents 25

Terminology 25

Mounting the Appliances in a Rack 27

Appliance Physical Specifications 27

Appliance Air Vents 28

Configuring the Appliances 29

Starting the Appliance 29

Available Software Images 29

Synchronizing RAID on 6800, 6900, and 7000 Appliances 29

Initial Configuration 32

Creating the Network Object 32

Advanced Configuration 33

Connecting to the 6000/7000 Appliances CLI 33

6000/7000 Appliances Hardware 34

Front Panel 34

Front Panel Ports 36

Front Panel System LEDs 37

Rear Panel 38

Using the Power Cable Restraint Strip on 6200 and 6400 Appliances 42

Table of Contents

6000 and 7000 Appliances Getting Started Guide|6

Using the Restraint Clip on 6500, 6600, 6700, 6800, 6900, and 7000 Appliances 43

Lights Out Management 45

Dual Redundant BIOS 45

Replacing and Upgrading Components 46

Restoring Factory Defaults 47

Restoring from the Gaia Portal 47

Restoring from the Boot Menu 47

Restoring from Gaia Clish 48

Registration and Support 49

Registration 49

Support 49

Where To From Here? 49

Safety, Environmental, and Electronic Emissions Notices

6000 and 7000 Appliances Getting Started Guide|7

Safety, Environmental, and

Electronic Emissions Notices

Read the following warnings before setting up or using the appliance.

Warning - Do not block air vents. A minimum 1/2-inch clearance is required.

Before you install or remove a chassis, or work near power supplies, turn off the power and

unplug the power cord.

To prevent damage to any system board, it is important to handle it with care. The following

measures are generally sufficient to protect your equipment from static electricity discharge:

nWhen handling the board, to use a grounded wrist strap designed for static discharge

elimination.

nTouch a grounded metal object before removing the board from the antistatic bag.

nHandle the board by its edges only. Do not touch its components, peripheral chips, memory

modules or gold contacts.

nWhen handling processor chips or memory modules, avoid touching their pins or gold edge

fingers.

nRestore the communications appliance system board and peripherals back into the

antistatic bag when they are not in use or not installed in the chassis. Some circuitry on the

system board can continue operating even though the power is switched off.

nUnder no circumstances should the lithium battery cell used to power the real-time clock be

allowed to short. The battery cell may heat up under these conditions and present a burn

hazard.

Warning - DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH

SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

nDisconnect the system board power supply from its power source before you connect or

disconnect cables or install or remove any system board components. Failure to do this can

result in personnel injury or equipment damage.

nAvoid short-circuiting the lithium battery; this can cause it to superheat and cause burns if

touched.

nDo not operate the processor without a thermal solution. Damage to the processor can

occur in seconds.

nClass 1 laser product warning - A totally enclosed laser system containing a class 1 laser.

Safety, Environmental, and Electronic Emissions Notices

6000 and 7000 Appliances Getting Started Guide|8

This device is not intended for use in the direct field of view at visual display workplaces. To avoid

incommoding reflexions at visual display workplaces this device must not be placed in the direct

field of view.

Rack Mount Instructions

The following or similar rack-mount instructions are included with the installation instructions:

1. Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the

operating ambient temperature of the rack environment may be greater than room

ambient. Therefore, consideration should be given to installing the equipment in an

environment compatible with the maximum ambient temperature specified by the

manufacturer.

2. Reduced Air Flow - Installation of the equipment in a rack should be such that the amount

of air flow required for safe operation of the equipment is not compromised.

3. Mechanical Loading - Mounting of the equipment in the rack should be such that a

hazardous condition is not achieved due to uneven mechanical loading.

4. Circuit Overloading - Consideration should be given to the connection of the equipment to

the supply circuit and the effect that overloading of the circuits might have on over current

protection and supply wiring. Appropriate consideration of equipment nameplate ratings

should be used when addressing this concern.

5. Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained.

Particular attention should be given to supply connections other than direct connections to

the branch circuit (e.g. use of power strips).

For California:

Perchlorate Material - special handling may apply. See

http://www.dtsc.ca.gov/hazardouswaste/perchlorate

The foregoing notice is provided in accordance with California Code of Regulations Title 22,

Division 4.5, Chapter 33. Best Management Practices for Perchlorate Materials. This product, part,

or both may include a lithium manganese dioxide battery which contains a perchlorate

substance.

Proposition 65 Chemical

Chemicals identified by the State of California, pursuant to the requirements of the California

Safe Drinking Water and Toxic Enforcement Act of 1986, California Health & Safety Code s.

25249.5, et seq. ("Proposition 65"), that is "known to the State to cause cancer or reproductive

toxicity" (see http://www.calepa.ca.gov)

Safety, Environmental, and Electronic Emissions Notices

6000 and 7000 Appliances Getting Started Guide|9

WARNING:

Handling the cord on this product will expose you to lead, a chemical known to the State of

California to cause cancer, and birth defects or other reproductive harm. Wash hands after

handling.

Caution

Any changes or modifications not expressly approved by the grantee of this device could void the

user's authority to operate the equipment.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) This device must accept

any interference received, including interference that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications to this equipment. Such modifications could void the user authority to operate the

equipment.

Information to user:

The user's manual or instruction manual for an intentional or unintentional radiator shall caution

the user that changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment. In cases where the manual

is provided only in a form other than paper, such as on a computer disk or over the Internet, the

information required by this section may be included in the manual in that alternative form,

provided the user can reasonably be expected to have the capability to access information in that

form.

Canadian Department Compliance Statement:

This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la

classe A est conforme à la norme NMB-003 du Canada.

Japan Compliance Statement:

Class A

Safety, Environmental, and Electronic Emissions Notices

6000 and 7000 Appliances Getting Started Guide|10

European Union (EU) Electromagnetic and Safety Compatibility Directives - 6200, 6400, 6500,

6600, 6700, 6800, 6900, and 7000 Appliances

This product is herewith confirmed to comply with the requirements set out in the Council

Directive on the Approximation of the Laws of the Member States relating to Electromagnetic

Compatibility Directives 2004/108/EC and 2014/30/EU.

This product is in conformity with Low Voltage Directives 2006/95/EC and 2014/35/EU.

This product complies with the requirements in the Council Directives 2006/95/EC and 2014/35/EU

relating to electrical equipment designed for use within certain voltage limits and the

Amendment Directive 93/68/EEC.

Product Disposal

This symbol on the product or on its packaging indicates that this product must not be disposed

of with your other household waste. Instead, it is your responsibility to dispose of your waste

equipment by handing it over to a designated collection point for the recycling of waste electrical

and electronic equipment. The separate collection and recycling of your waste equipment at the

time of disposal will help to conserve natural resources and ensure that it is recycled in a manner

that protects human health and the environment. For more information about where you can

drop off your waste equipment for recycling, please contact your local city office or your

household waste disposal service.

Altri manuali per 6000 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Checkpoint Hardware di rete

Checkpoint

Checkpoint 1500 Series Manuale utente

Checkpoint

Checkpoint QUANTUM FORCE 19000 Manuale utente

Checkpoint

Checkpoint Smart-1 205 Manuale utente

Checkpoint

Checkpoint 1570 Manuale utente

Checkpoint

Checkpoint VPN-1 Edge X Series Manuale utente

Checkpoint

Checkpoint TE250X Manuale utente

Checkpoint

Checkpoint L-71 Manuale di istruzioni

Checkpoint

Checkpoint QUANTUM SPARK 1530 Manuale utente

Checkpoint

Checkpoint 770 Manuale utente

Checkpoint

Checkpoint 21000 Appliances G-70 Manuale utente

Checkpoint

Checkpoint 5000 Series Manuale utente

Checkpoint

Checkpoint 6000 Series Manuale utente

Checkpoint

Checkpoint Smart-1 5050 Manuale di istruzioni

Checkpoint

Checkpoint Smart-1 225 Manuale utente

Checkpoint

Checkpoint QUANTUM SPARK 1500 Manuale di istruzioni

Checkpoint

Checkpoint MHO170 Manuale utente

Checkpoint

Checkpoint UTM-1 Edge W16 Manuale utente

Checkpoint

Checkpoint 21000 Appliances G-70 Guida

Checkpoint

Checkpoint QUANTUM SMART-1 Manuale utente

Checkpoint

Checkpoint QUANTUM SMART-1 6000-L/6000-XL Manuale utente

Checkpoint

Checkpoint 12000 Manuale utente

Checkpoint

Checkpoint TE2000XN Manuale utente

Checkpoint

Checkpoint 600 Manuale utente

Checkpoint

Checkpoint 16000 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente