Checkpoint IPS-1 Manuale utente

IPS-1

™ Quick Start Guide

Includes Check Point Software Blades

Power Up Your Check Point IPS-1 Appliance

• Connect the power cable to the power port on the IPS-1 appliance

rear panel and plug it into a power outlet.

• Turn the power on.

Connect Your PC for Initial Setup

• Initial setup must be done from a PC connected to the

appliance’s internal interface via the included Ethernet cable. After

completing the initial connection, the First Time Conﬁguration Wizard

will guide you through the process of conﬁguring the appliance.

• Before continuing, make sure your PC is conﬁgured correctly.

Figure 1: Internet Protocol (TCP/IP) Properties

For Windows XP Operating Systems

• Click

> Settings > Control Panel

> Network Connections.

• Double-click

Local Area Connection.

• In the General tab, click Properties.

• In the IP address ﬁeld, enter

192.168.1.2.

• In the Subnet mask ﬁeld, enter

255.255.255.0.

• Leave the Default gateway and

DNS settings ﬁelds empty.

• Click OK and close the

dialog boxes.

Figure 2: Internet Protocol (TCP/IP) Properties

For Windows Vista Operating System

• Click

> Control Panel

> Network and Internet

> Network and Sharing Center

> Manage network connections.

• Right-click Local Area Connection,

and then click Properties. If you

are prompted for an administrator

password or conﬁrmation, type the

password or provide conﬁrmation.

• Click the Networking tab.

Under This connection uses the

following items, click Internet

Protocol Version 4 (TCP/IPv4),

and then click Properties.

• In the IP address ﬁeld, enter

192.168.1.2.

• In the Subnet mask ﬁeld, enter 255.255.255.0.

• Leave the Default gateway and DNS settings ﬁelds empty.

• Click OK and close the dialog boxes.

Conﬁgure Your IPS-1 Appliance

• Connect a serial cable to the

console output of the appliance, or

open an ssh session from a console

(for example, using PuTTY for

Windows or the SSH command

from a Linux/Unix machine).

See the Getting Started Guide for

more details.

• Log in with the default system

administrator login name/

password, admin/admin.

• After logging in the ﬁrst time and

changing the default login name

and password, you can start the

ﬁrst time conﬁguration wizard by

typing sysconﬁg at the cpmodule

prompt. The wizard will guide

you through the initial system

conﬁguration process. Enter the

required parameters until the

system indicates it has completed

conﬁguring the device.

Figure 3: IPS-1 Appliance Login page.

Figure 4: First Time Conﬁguration Wizard−Welcome Page.

Figure 5: First Time Conﬁguration Wizard−Summary Page.

Registration and Technical Support

Appliance Registration

IPS-1 appliances require a license to be installed prior to operation.

To license and register your appliance, please visit:

http://register.checkpoint.com/cpapp

Appliance User Center

For further information about the IPS-1 appliance, see:

https://usercenter.checkpoint.com/usercenter/login/ips-1.

For technical assistance, contact Check Point

24 hours a day, seven days a week at:

+1 972-444-6600 (Americas)

+972 3-611-5100 (International)

IPS-1

™ Quick Start Guide

P/N: 704118

Check Point, the Check Point logo and IPS-1 are trademarks or registered trademarks of Check Point

Software Technologies Ltd. or its afﬁliates. All other product names mentioned herein are trademarks or

registered trademarks of their respective owners. The products described in this document are protected by

U.S. Patent No. 5,606,668, 5,835,726, 6,496,935, 6,873,988, and 6,850,943 and may be protected by other

U.S. Patents, foreign patents, or pending applications.

www.checkpoint.com

Indice

Altri manuali Checkpoint Hardware di rete

Checkpoint

Checkpoint QUANTUM SMART-1 Manuale utente

Checkpoint

Checkpoint QUANTUM MAESTRO Manuale utente

Checkpoint

Checkpoint 910 Manuale utente

Checkpoint

Checkpoint UTM-1 Edge W16 Manuale utente

Checkpoint

Checkpoint 12000 Manuale utente

Checkpoint

Checkpoint NGX R66 Manuale utente

Checkpoint

Checkpoint Smart-1 205 Manuale utente

Checkpoint

Checkpoint QUANTUM SPARK 1500 Manuale di istruzioni

Checkpoint

Checkpoint VPN-1 Edge X Series Manuale utente

Checkpoint

Checkpoint 600 Manuale utente

Checkpoint

Checkpoint 770 Manuale utente

Checkpoint

Checkpoint 1500 Series Manuale di istruzioni

Checkpoint

Checkpoint Smart-1 225 Manuale utente

Checkpoint

Checkpoint 21000 Appliances G-70 Manuale utente

Checkpoint

Checkpoint 730 Manuale utente

Checkpoint

Checkpoint 5000 Series Manuale utente

Checkpoint

Checkpoint 4200 Manuale utente

Checkpoint

Checkpoint Smart-1 625 Manuale di istruzioni

Checkpoint

Checkpoint 5000 Series Manuale utente

Checkpoint

Checkpoint CPAC-Falcon-10G-B Manuale di istruzioni

Checkpoint

Checkpoint 6000 Series Manuale utente

Checkpoint

Checkpoint 1570 Manuale utente

Checkpoint

Checkpoint 6000 Series Manuale utente

Checkpoint

Checkpoint MHO170 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente