CHERUBINI Garda Manuale utente

ISTRUZIONI - INSTRUCTIONS - EINSTELLANLEITUNGEN

INSTRUCTIONS - INSTRUCCIONES

Garda

Roll

Roll Easy

Micro

Micro Easy

MOTORI TUBOLARI

TUBULAR MOTORS

ROHRMOTOREN

MOTEURS TUBULAIRES

MOTORES TUBULARES

- To prevent any danger or malfunction, the size of electrical control components

connected to the motor must be compatible with the electrical features of the motor.

- Means for disconnection must be incorporated in the xed wiring in accordance with

the national installation standards.

- The selectors inverting the direction of rotation of the motor must be provided with

mechanical interloc king.

- Invert the brown and the black conductor to change the direction of rotation.

- NEVER connect two or more motors to the same selector (parallel connection). If you

couple two motors, use multi-poles selectors only.

- NEVER connect two or more selectors to the same motor.

- For outdoor use,provide the appliance with a supply cable

with designation H05RN-F containing

at least 2% of carbon.

ELECTRICAL CONNECTIONS

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

1- brown

2- black

3- blue

4- yellow-green

HOW TO PREPARE THE MOTOR

NB: If you use tubes with a round form, the driving pulley must be xed to the tube, and

the installation is to be paid by the person who installs the system. For other tube sections

the tting is optional, but strongly recommended.

STOP RING NUT ADAPTOR

DRIVING PULLEY

STOP RING NUT

1. Insert the adaptor in the stop ring nut

mating the groove with the reference notch

and push till they touch.

2. Fix the driving pulley on the motor pin

until the stop pin clicks.

3. Insert the motor fully in the rolling tube.

STOP RING NUT

ADJUSTING

SCREWS

CHERUBINI S.p.A. declares that the product is in conformity with the relevant

Union harmonisation legislation:

Directive 2014/35/EU

Directive 2014/30/EU

Directive 2011/65/EU

The full text of the EU declaration of conformity is available upon request at the

following website: www.cherubini.it.

EU DECLARATION OF CONFORMITY

ADJUSTEMENT OF THE LIMIT SWITCHES

These tubular motors are provided with a system of electromechanical limit switches that

stops the feed when the awning or the rolling shutter get to the maximum opening or

closing limits. To adjust these limits and adapt them to any need, simply screw or unscrew

the two adjusting screws on the motor head. The limits of the limit switches are preset at

about three turns of the roller.

1. To decide which adjusting screw to x, simply watch the direction

of rotation of the stop ring nut: if the stop ring nut pulled by the

roller goes in direction A, use the adjusting screw A to set the limit

switch in that direction. If it goes to the opposite direction (B), use

the adjusting screw B.

2. Start up the awning or the rolling shutter in the direction in

which you wish to set the rst limit switch.After a few turns the

motor will stop on the preset stop.

3. Screw the adjusting screw suited to the direction (see point

1.) in direction “+” till it gets to the chosen position.

4. Invert the engine sense of direction and set the second

limit switch.

Rev: 16 04/2020 - Cod: A4516_6190

CHERUBINI Deutschland GmbH

Siemensstrasse, 40 - 53121 Bonn - Deutschland

Tel. +49 (0) 228 962 976 34 / 35 | Fax +49 (0) 228 962 976 36

info@cherubini-group.de | www.cherubini-group.de

CHERUBINI France S.a.r.l.

ZI Du Mas Barbet

165 Impasse Ampère

30600 Vauvert -France

Tél. +33 (0) 466 77 88 58 | Fax +33 (0) 466 77 92 32

info@cherubini.fr | www.cherubini.fr

CHERUBINI Iberia S.L.

Avda. Unión Europea 11-H

Apdo. 283 - P. I. El Castillo

03630 Sax Alicante - Spain

Tel. +34 (0) 966 967 504 | Fax +34 (0) 966 967 505

info@cherubini.es | www.cherubini.es

CHERUBINI S.p.A.

Via Adige 55

25081 Bedizzole (BS) - Italy

Tel. +39 030 6872.039 | Fax +39 030 6872.040

info@cherubini.it | www.cherubini.it

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali CHERUBINI Motore

CHERUBINI

CHERUBINI Plug & Play Plus Manuale utente

CHERUBINI

CHERUBINI Tronic RX Manuale utente

CHERUBINI

CHERUBINI Plug&Play Short RX Manuale utente

CHERUBINI

CHERUBINI Ocean RX Manuale utente

CHERUBINI

CHERUBINI BLUE WAVE RX Manuale utente

CHERUBINI

CHERUBINI BLUE GARDA Series Manuale utente

CHERUBINI

CHERUBINI Plug&Play Short RX Manuale utente

CHERUBINI

CHERUBINI WAVE LOCK RX Manuale utente

CHERUBINI

CHERUBINI Ocean Manuale utente

CHERUBINI

CHERUBINI Garda RX Manuale utente

CHERUBINI

CHERUBINI Plug&Play Ocean Easy Manuale utente

CHERUBINI

CHERUBINI MODO RX Manuale utente

CHERUBINI

CHERUBINI Tronic RX Manuale utente

CHERUBINI

CHERUBINI Plug&Play Manuale utente

CHERUBINI

CHERUBINI Plug Manuale utente

CHERUBINI

CHERUBINI BLUE OCEAN Series Manuale utente

CHERUBINI

CHERUBINI Plug & Play 3000 Manuale utente

CHERUBINI

CHERUBINI BLUE TRONIC RX Series Manuale utente

CHERUBINI

CHERUBINI Plug&Play Ocean Easy Manuale utente

Manuali Motore popolari di altre marche

Rotax

Rotax 125 senior MAX evo Manuale utente

Kohler

Kohler K361 Manuale utente

MTD

MTD OHV Series Manuale utente

Kohler

Kohler COMMAND CH18-745 Manuale utente

Mercury

Mercury D4.2L D-Tronic Manuale utente

Selve

Selve SE Plus-RC Series Manuale utente

Perkins

Perkins 1206E-E66TA Manuale utente

Skov

Skov DA 174 Manuale

Rossi

Rossi TX11 Series Manuale utente

Siemens

Siemens SIMOTICS T-1FW3 Foglio di istruzioni

AL-KO

AL-KO PRO 350 Manuale utente

MTU

MTU 12 V 4000 Lx4 Manuale utente

Nanni

Nanni N3.30 Manuale di istruzioni

Nanni

Nanni N5.160 CR2 Manuale utente

KSB

KSB SuPreme Series Istruzioni per l'installazione

Hiwin

Hiwin EM1 Series Manuale utente

Rotax

Rotax 912 i series Istruzioni operative

Siemens

Siemens SIMOTICS XP 1MB1 Manuale utente