CHIEF PSM-2131 Manuale utente
INSTALLATION INSTRUCTIONS
07/27/07
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
PSM-2131 and PSM-2132
PLASMA DISPLAY STATIC MOUNT
(1) Bracket, Plasma Mounting, Static (1) Latching Flag
(6) Screws, M8 x 35mm Button Head Cap (6) Screws, M8 x 50mm Button Head Cap
(1) 10-24 x .5 FH Undercut Screw (6) Mounting Buttons, Nylon stepped, pan style
(1) Nylon Washer (1) Allen Key, 5mm
(1) 10-24 Nylock Nut
NOTE: Not all parts are used for every application.
BEFORE PROCEEDING: Unpack the carton, verify contents shown in Figure 1 and read
installation instructions completely. If you are missing any of the listed
components, please contact Customer Service at 1-800/582-6480.
THE MOUNT, WHEN ANCHORED IN PLACE, MUST BE
CAPABLE OF SUPPORTING 4 TIMES THE COMBINED
WEIGHT OF THE PLASMA AND MOUNT.
PLASMA DISPLAYS ARE EXTREMELY FRAGILE.
CAUTION!
Figure 1
WARNNG!
INSTALLATION INSTRUCTIONS
07/27/07
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
PSM-2131
1. Attach six mounting buttons to display using six M8 x 35mm button head cap screws
provided (see Figure 2).
2. Secure latching flag to Plasma Static Mount using one 10-24 x .5 FH undercut screw, one Nylon
washer, and one 10-24 Nylock nut (see Figure 3).
3. Securely anchor plasma static mount to the wall using wall studs or supporting framework (see Figure 4).
4. Make sure the flag is lowered to the side before attempting to place the display on the mount.
5. With the aid of another person, lift the display up to the mount, align the mounting buttons on the display
with the teardrop slots in the mount, and set the display into place (see Figure 4).
6. Position (raise) the flag to secure the display (see Figure 4)
Figure 2
Mounting Buttons
Align Mounting
Buttons with
Teardrop Slots
Anchor to wall
using four slots
Figure 4
Figure 3
10
-
24 Nylock Nut
installed from underside
Nylon Washer
b
etween flag & mount
10
-
24 x .5 FH
Undercut Screw
Raise Flag
INSTALLATION INSTRUCTIONS
07/27/07
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
PSM-2132
1. Attach four mounting buttons to display using four M8 x 35mm button head cap screws provided
(see Figure 5). Use longer screws for screens with deep recessed threaded holes.
2. Secure latching flag to Plasma Static Mount using one 10-24 x .5 FH undercut screw, one Nylon
washer, and one 10-24 Nylock nut (see Figure 6).
3. Securely anchor the plasma static mount to the wall using wall studs or supporting framework (see
Figure 7).
4. Make sure the flag is lowered to the side before attempting to place the display on the mount.
5. With the aid of another person, lift the display up to the mount, align the mounting buttons on the display
with the teardrop slots in the mount, and set the display into place.
6. Position (raise) the flag to secure the display.
Mounting Button
Locations
Align Mounting
Buttons with
Teardrop Slots
Anchor to wall
using four slots
Figure 5
Figure 7
Figure 6
10
-
24 Nylock Nut
installed from underside
Latching Flag
(Note outer
hole location)
Nylon Washer
between flag & mount
10
-
24 x .5 FH
Undercut Screw
Questo manuale è adatto per i seguenti modelli
1
Altri manuali CHIEF Rack e supporto
CHIEF
CHIEF FHP110 Manuale utente
CHIEF
CHIEF RPME Elite Series Manuale utente
CHIEF
CHIEF FSD-4100 Manuale utente
CHIEF
CHIEF PAC-Y3 Manuale utente
CHIEF
CHIEF KTP220 Manuale utente
CHIEF
CHIEF PSS2000 Manuale utente
CHIEF
CHIEF PSB-2244 Manuale utente
CHIEF
CHIEF PACHFK2 Manuale utente
CHIEF
CHIEF MFAU Manuale utente
CHIEF
CHIEF RPM Manuale utente
CHIEF
CHIEF FSB4090 Manuale utente
CHIEF
CHIEF RPA4000 Manuale utente
CHIEF
CHIEF K1D100 Manuale utente
CHIEF
CHIEF WP2XS Manuale utente
CHIEF
CHIEF MSP-BBSP Manuale utente
CHIEF
CHIEF PSM-2124 Manuale utente
CHIEF
CHIEF SSB-104 Manuale utente
CHIEF
CHIEF FSR Series Manuale utente
CHIEF
CHIEF JSB2090 Manuale utente
CHIEF
CHIEF PNRIW Series Manuale utente
