Ci Design iStoragePro iT4 UFER Manuale utente
Copyright © 2011 Ci Design Co., Inc.
20 Odyssey, Irvine, CA 92618.
Toll Free: 1-800-272-0062
Fax: 949-279-1572
Email: [email protected]
www.iStoragePro.com
iT4 UFER
QUICK START GUIDE
VERSION 1.0 MAC
iT4 UFER Quick Start Guide
P A G E 2
a. Mount the drive at the very end of the tray.
b. Leave a gap at the front.
c. Use the following screw holes to mount the drive.
1. Mount drives in drive trays.
The instructions in this Quick Start Guide are for rst-time setup
only. Please do not use this procedure when RAID has already been
initialized.
iT4 UFER Quick Start Guide
P A G E 3
3. Connect the power cord.
2. Insert the drive trays into the unit.
4. Connect one of the data cables from the host to the unit.
(USB, Firewire 400, Firewire 800, or eSATA)
iT4 UFER Quick Start Guide
P A G E 4
6. Select “-Re-init?” by pressing the left button.
5. Power on the unit via the switch in the rear of the unit.
7. Wait for a few seconds, and then select “-Init?” by pressing the left
button again.
Warning: This will erase any data on the disks.
iT4 UFER Quick Start Guide
P A G E 5
9. On the Mac host, start Disk Utility.
8. Wait a few more seconds for the initialization to complete.
10. Select the device on the left.
Select the “Erase” tab, then click on “Erase.”
iT4 UFER Quick Start Guide
P A G E 6
12. The volume should now be formatted and mounted.
11. Conrm by selecting “Erase.”
13. There should now be an icon on the desktop for the new volume.
iT4 UFER Quick Start Guide
P A G E 7
For information, contact iStoragePro at:
20 Odyssey, Irvine, CA 92618, USA
Toll Free 1-800-272-0062
Fax 949-679-1572
Email [email protected]
Live technical support and rmware upgrades available:
Monday – Friday, 8:30am to 5:30pm PST, excluding Holidays.
Copyright © Ci Design Co., Inc. 20 Odyssey, Irvine, CA 92618
Ci Design and iStoragePro are registered trademarks of Commercial and Industrial Design Co., Inc. All rights reserved. All
other trademarks, trade names or company names referenced herein are used for identication purposes only and are the
property of their respective owners.
Under Copyright Law, no portion of this manual may be copied, in whole or in part, without the written consent of Ci Design.
All products, dates, specications, features, and gures, and information specied in this document are introductory and
based on ideal conditions, and are subject to change without notice. Ci Desgin is not responsible for any print or clerical
errors.
www.iStoragePro.com
Altri manuali Ci Design Azionamento CC
Manuali Azionamento CC popolari di altre marche
Vincent Associates
Vincent Associates UNIBLITZ ED12DSS Manuale utente
EKSMA OPTICS
EKSMA OPTICS DQ-100-4 Manuale elenco delle parti
Chamberlain Garog
Chamberlain Garog D Series Manuale utente
Parker
Parker PDS Series Manuale utente
Festo
Festo DGC G Series Guida all'installazione
Binks
Binks QS-5012-1-CE Manuale utente
