Cisco MERAKI MS125 Manuale utente

MS125 Series Installation Guide

Models

MS125-24 MS125-24P MS125-48 MS125-48LP MS125-48FP

1Gbe RJ45 24 24 48 48 48

10Gbe SFP+ 44444

Dedicated Mgmt Interface 11111

PoE Capable No Yes, 370W No Yes, 370W Yes, 740W

Power Supply Built-in Built-in Built-in Built-in Built-in

Fans No Built-in No Built-in Built-in

Package contents

In addition to the MS switch, the following are provided:

▪ US 12-24 mounting screws and cage nuts, 5 of each

▪ INTL M5 mounting screws and cage nuts, 5 of each

▪ INTL M6 mounting screws and cage nuts, 5 of each

▪ Mounting washers

Installation Instructions

1. Install the mounting cage nuts in the rack being used for the switch.

2. Attach the switch face plate to the cage nuts on the rack.

Note: Each MS125 comes with an instruction pamphlet within the box. This pamphlet contains detailed step by step guides and images to assist in

the physical install of the switch.

3. Connect power to the power supply unit.

4. ( ptional) Install additional SFP+ units as needed, depending on the compatibility of your model.

MS125-24 Series front panel

MS125-24P Series front panel

MS125-48 Series front panel

MS125-48LP/FP Series front panel

Ports and Status Indicators

The MS uses LEDs to inform the user of the device's status. When the device powers on, all the Internet LEDs flash twice. Additional functions are described

below, from left to right.

Item Function LED Status Meaning

1 Power Solid orange Switch is unable to connect to the Meraki cloud

Flashing white Firmware upgrade in process

Solid white Switch is fully operational and connected to the Meraki cloud

ff Switch does not have power

2 Restore N/A Restore button to clear switch IP and local configuration settings

3 Switch Ports ff No link is detected on this port

Flashing orange (RJ45 ports only) Activity indicator

Solid green 1 Gbps link detected

In addition, there is a REST RE button available on the front panel.

Insert a paperclip if a restore is required.

•A brief, momentary press: To delete a downloaded configuration and reboot.

•Press and hold for more than 10 sec: To force the unit into a full factory restore.

MS125 Series back panel

Item Function LED Status Meaning

1 Management Interface Green Connected, used for easy access to the local status page

Power input Power cords may be ordered separately.

Equipment is to be used only in a restricted access location and installed/operated only by trained service personnel.

Mounting hardware

The mounting hardware includes a rack mount kit for standard 1U racks. When installing the device, make sure that there is sufficient space between the rear of

the rack and other obstacles to ensure adequate airflow.

Optional Mid-Mount bracket

MS125 48 port models are designed for an optional MA-MNT-MID-1 mid-mount bracket when using 2-post racks.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Cisco MERAKI Interruttore