Cisco Linksys SPA 2102 Manuale utente

www.joip.com

Cisco Linksys SPA 2102

Phone adapter with Router for your Internet calling

www.joip.com

Home Phone Adapter

1. Introduction........................................................................................................................................................ 3

2. Signup.................................................................................................................................................................. 4

3. Using the Linksys Phone Adapter as an ATA............................................................................................. 6

3. Using the Linksys Phone Adapter as an ATA + Home Router ............................................................... 9

4. VoIP Calling Features..................................................................................................................................... 12

6. For Further Assistance ................................................................................................................................... 15

www.joip.com

1.Introduction

What is the joip Home phone service?

The joip Home phone service allows you to make calls through your Home internet connection, saving you up

to 70% on your phone bill. Internet Phone to Phone service works just like your regular phone and provides

you with the best VoIP services.

Simply Signup, Receive your phone adaptor and connect it to your internet connection and home phone.

With joip Home phone, you can also take your account and number with you: receive and make calls from

your Home phone, Mobile phone, PC or Tablet. You can find all the relevant information at www.joip.com

under our products section.

This means that you can make low-cost phone calls at any given moment!

www.joip.com

2.Signup

1. Visit our website and choose the calling plan you prefer.

2. Fill out the signup form and click ‘Continue’.

The ‘Registered

phone number’

will link your

phone to the app

and function as

your Caller ID

when using the

app

www.joip.com

3. Review the summary and click ‘Confirm’. Note that before confirming your signup is not yet

completed.

4. Wait for the confirmation page. Please check your mailbox for our confirmation email containing

your account details (8-digit User ID and the 4-digit password you have chosen). It may take up to 30

minutes for the email to arrive.

www.joip.com

3.Using the Linksys Phone Adapter as an ATA

Configuration 1- If you use a broadband modem (ADSL modem or cable modem)

IMPORTANT NOTE: Your Linksys Phone Adapter is pre-configured as a DHCP client for use with your home router. If your router is not configured to

support DHCP, please contact Customer Care at http://joip.custhelp.com/ for further assistance.

Standard

Home

Router

Linksys

Phone

Adapter

ADSL or Cable

Modem

Ethernet

cable

provided in

the package

Internet

INSTALLATION:

Step I: Connect your Linksys Phone Adapter to your home network/router

1. Connect the phone: Connect a telephone to “PHONE 1” of the two phone ports (as shown in the

diagram below) on the Linksys;

2. Connect the home router: Use the Ethernet cable provided in the packaging and connect the

“INTERNET” port (as shown in the diagram below) on the Linksys to an spare Ethernet port on

your home router;

3. Connect the power: Connect the power cord to the receptacle on the Linksys marked “POWER”

(as shown in the diagram below), and the power adapter to an electrical outlet.

www.joip.com

Step II: Start making and receiving IP phone calls

1. Wait for the “POWER”, and “PHONE 1” LEDs on the Linksys to stop blinking. It should only take

a few minutes. Once the LEDs are solidly lit, pick up the telephone receiver and verify that you

hear a dial tone;

2. Once you hear a dial tone, you are ready to make and receive calls. When placing calls, always

use 10-digit dialing such as 210-555-1212 (area code + number) even if it is a local number.

Configuration 2 - If you use a broadband solution that combines an ADSL modem or a cable modem

with a router

IMPORTANT NOTE: Your Linksys Phone Adapter is pre-configured as a DHCP client for use with your home router. If your router is not configured to

support DHCP, please contact Customer Care at http://joip.custhelp.com/ for further assistance.

ADSL or Cable

Modem combined

with a Router

Linksys

Phone

Adapter

Ethernet

cable

provided in

the package

Internet

Ethernet

Switch

INSTALLATION:

Step I: Verify Ethernet Port Availability

1. Check your broadband solution. If there is at least one spare Ethernet Port, skip the rest of this

Step and proceed to Step II.

2. If there is no spare Ethernet Port on your broadband home portal, you need to obtain an

Ethernet Switch or Hub, and connect it to the router. An Ethernet switch or hub is not provided

in the package. If you need assistance with this step, please contact Customer Care at

http://joip.custhelp.com/ for further assistance.

www.joip.com

Step II: Connect your Linksys Phone Adapter

1. Connect the phone: Connect a telephone to “PHONE 1” of the two phone ports (as shown in the

diagram below) on the Linksys;

2. Connect to the router or switch: Use the Ethernet cable provided in the packaging and connect

the “INTERNET” port (as shown in the diagram below) on the Linksys to a spare Ethernet port on

your router (or the Ethernet switch or hub as described in Step I);

3. Connect the power: Connect the power cord to the receptacle on the Linksys marked “POWER”

(as shown in the diagram below), and the power adapter to an electrical outlet.

Step III: Start making and receiving IP phone calls

1. Wait for the “POWER” and “PHONE” LEDs on the Linksys to stop blinking. It should only take a

few minutes. Once the LEDs are solidly lit, pick up the telephone receiver and verify that you

hear a dial tone;

2. Once you hear a dial tone, you are ready to make and receive calls.

When placing calls always use 10-digit dialing such as 210-555-1212 (area code + number) even if

it is a local number.

www.joip.com

3.Using the Linksys Phone Adapter as an ATA +

Home Router

IMPORTANT NOTE: Your PC need to be pre-configured as a DHCP client for use with Linksys Phone Adapter. If your PC is not configured as DHCP, please

contact Customer Care at http://joip.custhelp.com/ for further assistance.

INSTALLATION:

Step I: Connect your Linksys Phone Adapter to your home network/router

1. Connect the phone: Connect a telephone to “PHONE 1” of the two phone ports (as shown in the

diagram below) on the Linksys;

2. Connect the home router: Use the Ethernet cable provided in the packaging and connect the

“INTERNET” port (as shown in the diagram below) on the Linksys to an spare Ethernet port on your

home router;

3. Connect your PC: Use different Ethernet cable and connect the “ETHERNET” port (as shown in the

diagram below) on the Linksys to the Ethernet port on your PC;

www.joip.com

4. Connect the power: Connect the power cord to the receptacle on the Linksys marked “POWER” (as

shown in the diagram below), and the power adapter to an electrical outlet;

Step II: Configure the Linksys Phone Adapter

1. Launch the web browser on the PC.

2. Enter http://192.168.0.1/advanced in the Address field (192.168.0.1 is the default local IP address of

the Phone Adapter). Then press the Enter key.

3. You will see a login screen (as shown in the diagram below). In the User Name field, enter user, the

default user name for user access (this cannot be changed).

4. The Router - Status screen will appear. Click the WAN Setup tab.

5. Select PPPoE for the Connection Type.

Indice

Altri manuali Cisco Adattatore

Cisco

Cisco ATA 191 Manuale utente

Cisco

Cisco SPA100 Series Manuale di istruzioni

Cisco

Cisco LINKSYS USB1000 Manuale utente

Cisco

Cisco PA-MC-T3 Manuale di istruzioni

Cisco

Cisco PA-E3 Series Istruzioni operative e di manutenzione

Cisco

Cisco PA-4B-U Istruzioni operative e di manutenzione

Cisco

Cisco Linksys AE6000 Manuale utente

Cisco

Cisco Linksys AE6000 Manuale utente

Cisco

Cisco Linksys AE1200 Manuale utente

Cisco

Cisco SM-X-NIM-ADPTR Guida rapida

Cisco

Cisco 10BASE-FL Istruzioni operative e di manutenzione

Cisco

Cisco ATA 190 Manuale di istruzioni

Cisco

Cisco LINKSYS WUSB54AG Manuale utente

Cisco

Cisco DTA50 Manuale utente

Cisco

Cisco ATA 186 Manuale utente

Cisco

Cisco SPA2102-AN - Single Port Router Manuale di istruzioni

Cisco

Cisco PLTE200 Manuale utente

Cisco

Cisco SPA112 Manuale utente

Cisco

Cisco LINKSYS WUSB54GC Manuale utente

Cisco

Cisco WUSB100 Manuale utente

Cisco

Cisco WUSB100 Manuale utente

Cisco

Cisco PLE300 Manuale utente

Cisco

Cisco ATA 186 Manuale di servizio

Cisco

Cisco CVA122 Guida all'installazione

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente