Cisco NCS 1010 Manuale utente

Prepare to Install Cisco NCS 1010

This chapter explains how to prepare for the Cisco NCS 1010 installation.

•Package Contents, on page 1

•Unpack and Verify Cisco NCS 1010, on page 2

Package Contents

You can order Cisco NCS 1010 as assembled chassis (NCS1010-SYS) or as empty chassis (NCS1010-SA)

along with the components. See PIDs for all PIDs of the NCS 1010 components.

The shipped package contains the following:

• Cisco NCS chassis.

• Accessory kit (NCS1010-ACC-KIT)―Includes all the hardware necessary for the chassis installation

on the 19" rack. You can order the accessory kits for ETSI (NCS1010-ETSI-KIT) and 23" ANSI

(NCS1010-23-KIT) racks as required. The following table describes the contents of the accessory kits.

Table 1: Accessory Kit Contents

ContentsAccessory Kit

This kit has the following items for chassis

installation on a 19" rack:

• Double hole ground lug (1x)

• M5 Pan head screws (2x)

• 12–24 Pan head screws (8x)

• External tooth washers (2x)

• Standoffs (2x)

• Left slide rail (1x)

• Right slide rail (1x)

• Protection cover (1x)

NCS1010-ACC-KIT

Prepare to Install Cisco NCS 1010

ContentsAccessory Kit

This kit has the following items for chassis

installation on an ANSI 23" rack:

• 23" rack to 19" rack adapter

• 12–24 Screws (14x)

NCS1010-23-KIT

This kit has the following items for chassis

installation on an ETSI rack:

• ETSI rack to 19" rack adapter

• M6 screws (8x)

• Ground adapter

NCS1010-ETSI-KIT

• Field replaceable modules such as PSUs, controller, fan trays, air filter, and line card (the variant of line

card that you have ordered).

• AC and DC power cables that you have ordered. See Supported Cables.

Unpack and Verify Cisco NCS 1010

Use this task to unpack and check if all the chassis modules that are required for installation have been shipped.

Procedure

Step 1 When you receive Cisco NCS 1010 equipment at the installation site, open the top of the box.

Step 2 Remove the accessory kits and foam inserts in the box. The box contains Cisco NCS 1010 and other items

that are needed for installation.

Step 3 To remove the chassis from the packaging, grasp the side of the chassis and lift it out of the box.

Use these lifting guidelines to avoid injury to yourself or damage to the equipment:

• Do not lift equipment alone; have another person help you to lift the equipment.

Prepare to Install Cisco NCS 1010

Unpack and Verify Cisco NCS 1010

Figure 1: Lifting Cisco NCS 1010

A fully loaded chassis can weigh as much as 19 kg (42 lb).

• Ensure that your footing is solid; balance the weight of the object between your feet.

• Lift the equipment slowly; never move suddenly or twist your body as you lift.

• Keep your back straight and lift with your legs, not your back. When bending down to lift equipment,

bend at the knees (not at the waist), to reduce the strain on your lower back muscles.

Step 4 Verify the following:

• Cisco NCS 1010 is not damaged. Check for a scratch, bend, discoloration, or deformation on the Cisco

NCS 1010 chassis.

• The modules that are shipped with the chassis or separately are not damaged.

Step 5 If there is any damage to the chassis or the modules, call your Cisco sales engineer for a replacement.

Prepare to Install Cisco NCS 1010

Unpack and Verify Cisco NCS 1010

Prepare to Install Cisco NCS 1010

Unpack and Verify Cisco NCS 1010

Altri manuali per NCS 1010

Indice

Altri manuali Cisco Telaio

Cisco

Cisco C4200 Manuale utente

Cisco

Cisco Nexus 7010 Manuale di istruzioni

Cisco

Cisco NCS 1001 Manuale utente

Cisco

Cisco Network Convergence System 6000 Fabric Card... Manuale

Cisco

Cisco Firepower 4100 Series Manuale utente

Cisco

Cisco Remote PHY Shelf 7200 Manuale di istruzioni

Cisco

Cisco cBR Manuale utente

Cisco

Cisco 6160 Manuale per l'uso e la cura

Cisco

Cisco NCS 1004 Manuale

Cisco

Cisco UCS C4200 Istruzioni di installazione e manutenzione

Cisco

Cisco CRS-1 - Carrier Routing System Router Manuale tecnico

Cisco

Cisco NCS 4016 Manuale utente

Cisco

Cisco cBR Series Manuale utente

Cisco

Cisco USC 5030 Manuale utente

Cisco

Cisco SCE8000 GBE Manuale di istruzioni

Cisco

Cisco ASA5500-HW - Hardware Accessory Kit Network... Manuale

Cisco

Cisco TelePresence Server 7010 Guida

Cisco

Cisco NCS 6000 Manuale utente

Cisco

Cisco NCS 4016 Manuale di istruzioni

Cisco

Cisco Nexus 9504 Manuale utente

Cisco

Cisco AS5350 - Universal Access Server Manuale utente

Cisco

Cisco AS5350XM Manuale utente

Cisco

Cisco ASR 5500 Guida all'installazione

Cisco

Cisco UCS 5108 Manuale utente

Manuali Telaio popolari di altre marche

Advantech

Advantech IPC-623 Series Manuale utente

IMC Networks

IMC Networks iMcV/18 Manuale utente

Chenbro

Chenbro RB13804N4WFT Manuale utente

Lenovo

Lenovo ThinkSystem SR665 V3 Manuale utente

Wuntronic

Wuntronic PCI4DRQ Manuale utente

EtherWAN

EtherWAN EMC400 Manuale utente

Overland Storage

Overland Storage SnapSAN S1000 Guida

Philips

Philips LC4.1E A Manuale utente

Supermicro

Supermicro SCF418 Series Manuale utente

Chenbro

Chenbro RM437 Series Manuale utente

Pickering

Pickering 40-914 Manuale utente

HP A7503-S Istruzioni per il montaggio

Supermicro

Supermicro SC823MTQ-R700LPB Manuale utente

SilverStone

SilverStone RMS08 Series Manuale utente

NI cRIO-FRC II Manuale utente

Pickering

Pickering 65-200 Manuale utente

Allied Telesis

Allied Telesis AT-MMCR18 Manuale utente

Hisense

Hisense MSD6586 Manuale utente