Cisco SPA3000 Manuale utente

Set Up the SPA3000

Document ID: 108740

Contents

Introduction

How do you initially set up an SPA3000?

Related Information

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business

products (formerly Linksys Business Series).

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Q. How do you initially set up an SPA3000?

A. In setting up the SPA3000, make sure you have a one touch tone analog phone, your

NodePhone account details, and access to a standard phone port. You should also have these

package contents:

Phone Adapter Unit♦ Ethernet Cable Standard Phone Cable♦ A 5 Volt Power Adapter♦

Note: This guide has been prepared with firmware 2.0.13, the current supported firmware

release for NodePhone. If you are using an earlier firmware, the web configuration screen

might not look the same as the images in this document. Cisco recommends upgrading your

SPA3000 to version 2.0.13, which is available from the Cisco Download Center ( registered

customers only) .

In order to set up the SPA3000, complete these steps:

Ensure the SPA3000 Power Supply is Connected Properly1. Connect the SPA30002.

Ensuring the SPA3000 Power Supply is Connected Properly

Make sure the power adapter is plugged to an available power outlet.1.

After the plug is connected to the power adapter, connect the SPA3000. For

instructions, complete the next steps.

2.

Connecting the SPA3000

Connect the phone cable to the wall jack with ADSL service, and then connect the

other end to the LINE port of the gateway. Then, connect the Ethernet cable from the

SPA3000 to one of the Ethernet ports (1,2,3 or 4 ) of the Linksys gateway.

1.

Connect the phone cable to the wall jack with ADSL service, then connect the other

end to the line port of the ADSL line filter.

2.

Connect the ADSL modem line to the ADSL port of the ADSL router, and the local

phone line should be connected to the LINE port of the SPA3000.

3.

Connect the phone to the PHONE port on the SPA3000.4.

The PSTN phone line goes from the Local phone port of the Line Filter to the Line

port on the SPA3000. The Phone is connected to the Phone port of the SPA3000. The

Ethernet cable is connected between the ADSL router and the SPA3000.

5.

Related Information

Technical Support & Documentation − Cisco Systems•

Contacts & Feedback | Help | Site Map

© 2013 − 2014 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of

Cisco Systems, Inc.

Updated: Dec 12, 2008 Document ID: 108740

Indice

Altri manuali Cisco Portale

Cisco

Cisco DPC2425 Manuale utente

Cisco

Cisco Explorer 9800 Multi-Screen Series Manuale utente

Cisco

Cisco VG202 Manuale

Cisco

Cisco LINKSYS RFC 2364 Istruzioni operative originali

Cisco

Cisco VG224 - Analog Phone Gateway Manuale utente

Cisco

Cisco Expressway CE500 Manuale utente

Cisco

Cisco Meraki Z3C Manuale utente

Cisco

Cisco AS5850 Manuale

Cisco

Cisco Expressway Series Manuale utente

Cisco

Cisco Small Business Pro SA520 Guida alla risoluzione dei problemi

Cisco

Cisco VG248 - Gateway Manuale

Cisco

Cisco Meraki Go Istruzioni operative

Cisco

Cisco Connected Life CLG-8202-WW Manuale utente

Cisco

Cisco IC3000 Manuale dell'operatore

Cisco

Cisco Linksys WAG310G Manuale utente

Cisco

Cisco ISDN GW 3241 Manuale utente

Cisco

Cisco VG204 Manuale utente

Cisco

Cisco DPC3825 Manuale utente

Cisco

Cisco Catalyst CG113-W6 Manuale

Cisco

Cisco RF Gateway 1 Modules Manuale utente

Cisco

Cisco VG350 Manuale utente

Cisco

Cisco 2621XM Manuale utente

Cisco

Cisco 450 Manuale

Cisco

Cisco 3521 Manuale di servizio

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente