Cisco 8831 Manuale utente

Perform a Hard Factory Reset on an 8831

Series IP Phone

Contents

Introduction

Reset the IP Phone

Factory Reset

Hard Factory Reset

Introduction

This document describes how to perform a hard factory reset on a Cisco 8831 Series IP phone,

which resets all of the network and security settings of the phone.

Reset the IP Phone

There are two methods that you can use in order to reset the Cisco IP phone: a factory reset, and

a hard factory reset.

Factory Reset

In order to perform a factory reset, navigate to Apps > Admin Settings > Reset Settings.

Choose one of these options in order to reset the phone to the factory default settings:

All

●

Network

●

Security

●

Hard Factory Reset

If the factory reset method that is described in the previous section is not possible, then a hard

reset can be attempted in order to achieve similar results. However, this method resets all of the

settings directly and does not provide the option to reset only the network or security settings.

Complete these steps in order to perform a hard factory reset of the phone:

Step 1. Unplug the Ethernet cable from the back side of the phone in order to power off the phone.

Note: If the phone is powered through a power brick, then power it off through the power

brick.

Step 2. Press and hold the Microphone (MIC) button on the front side of the phone, as shown in

the image.

Step 3. Continue to hold the MIC button and power on the phone (plug in the Ethernet cable or the

power brick). When the lights that are located on the left, right, and back sides of the phone

change from green to red, release the MIC button, as shown in the image.

Step 4. Press and hold the MIC button for approximately five seconds, and then release it. The

lights should blink red twice.

Step 5. Press and hold the MIC button. After approximately five seconds, the lights should begin to

blink red continuously, which confirms the factory reset of the phone.

Click this video in order to view the procedure:

Altri manuali per 8831

12

Indice

Altri manuali Cisco Telefono IP

Cisco

Cisco 8865NR Manuale utente

Cisco

Cisco 7905 serie Manuale utente

Cisco

Cisco 7912G - IP Phone VoIP Manuale di istruzioni

Cisco

Cisco 7861 Manuale utente

Cisco

Cisco Small Business SPA 301 Manuale di istruzioni

Cisco

Cisco 8861 Guida di riferimento rapido

Cisco

Cisco DATAVOX 7941 Manuale utente

Cisco

Cisco 7832 Manuale utente

Cisco

Cisco 6945 Series Manuale utente

Cisco

Cisco MCS 7800 Series Manuale utente

Cisco

Cisco 524G - Unified IP Phone VoIP Manuale utente

Cisco

Cisco 7906G - Unified IP Phone VoIP Manuale utente

Cisco

Cisco MCS 7800 Series Manuale di servizio

Cisco

Cisco IP Phones Manuale dell'operatore

Cisco

Cisco 8800 Series Manuale utente

Cisco

Cisco Small Business Pro SPA 508G Manuale utente

Cisco

Cisco Cisco 7940 Manuale utente

Cisco

Cisco Unified 6921 Manuale utente

Cisco

Cisco SPA525G - Small Business Pro IP Phone VoIP Manuale utente

Cisco

Cisco SPA 504G Manuale utente

Cisco

Cisco 7921G - Unified Wireless IP Phone VoIP Manuale utente

Cisco

Cisco SPA-500 Series Manuale utente

Cisco

Cisco 7841 Guida

Cisco

Cisco 7920 - Unified Wireless IP Phone VoIP Manuale utente

Manuali Telefono IP popolari di altre marche

Alcatel

Alcatel 4028 Manuale utente

Polycom

Polycom Polycom VVX 600 Manuale utente

Polycom

Polycom SoundPoint IP 450 Manuale utente

Polycom

Polycom SoundPoint IP 650 Manuale utente

Proximus

Proximus Maestro 3016 IP Manuale utente

Fanvil

Fanvil X4 Manuale utente

Snom

Snom 320 Manuale utente

Yealink

Yealink Yealink SIP-T46G Manuale utente

Avaya

Avaya 4625SW Manuale utente

Yealink

Yealink SIP-T52S Manuale utente

Nortel

Nortel 1140E Manuale utente

Nexotek

Nexotek NT-P500 Manuale utente

Avaya

Avaya Integral 5 R3.0 Manuale utente

GE

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuale utente

Avaya

Avaya 4600 Series Manuale di servizio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuale utente

Nortel

Nortel i2050 Manuale utente

Fiberme

Fiberme FAP260 Series Manuale utente