Cisco MCS 7800 Series Scheda tecnica

Get Started with Your New Phone

•Your New Phone, on page 1

•Install Your New Phone (7800 Series) on Webex Calling (formerly Spark Call), on page 1

•Install Your New Phone (8800 Series) on Webex Calling (formerly Spark Call), on page 2

•Install Your New Conference Phone (7832), on page 2

•Complete Your Initial Setup in Cisco Webex Settings, on page 3

•Get an Activation Code, on page 4

•Activate Your Phone Automatically with a QR Code (8845, 8865, and 8865NR), on page 4

•Activate Your Phone Manually, on page 5

•Activate Your Voicemail Account, on page 5

•Voicemail PIN Rules, on page 6

Your New Phone

To start using your new Cisco phone, you will need to follow these steps:

• Install your phone with the components in the box.

• Sign in to Cisco Webex Settings and complete your initial setup.

• Activate your phone.

• Activate your voicemail account.

Install Your New Phone (7800 Series) on Webex Calling

(formerly Spark Call)

Your phone comes with everything you need to power it up, connect it to the network, and set it up on your

desk.

You cannot adjust the Cisco IP Phone 7811 footstand.

To check which phone model you have, press Applications and select Phone information. The Model

number field shows your phone model.

If you'd like to see a graphic overview of these steps, see the Cisco IP Phone 7800 Series Installation Guide.

Get Started with Your New Phone

Procedure

Step 1 Plug the long, straight end of the handset cable into the phone and plug the other end into the handset.

Step 2 Connect the network cable from your network to the network port on the phone.

Step 3 Connect the footstand and adjust the angle of the phone.

a) Insert the curved connectors into the lower slots.

b) Lift the footstand until the connectors snap into the upper slots.

You may need to exert more force than you expect to connect or disconnect the footstand.

c) Adjust the angle of the phone.

Step 4 Plug in the external power supply.

Install Your New Phone (8800 Series) on Webex Calling

(formerly Spark Call)

Your phone comes with everything you need to power it up, connect it to the network, and set it up on your

desk.

To check which phone model you have, press Applications and select Phone information. The Model

number field shows your phone model.

If you'd like to see a graphic overview of these steps, see the Cisco IP Phone 8800 Series Installation Guide.

Procedure

Step 1 Plug the long, straight end of the handset cable into the phone and plug the other end into the handset.

Step 2 Connect the network cable from your network to the network port on the phone.

Step 3 Connect the footstand and adjust the angle of the phone.

a) Insert the connectors into the slots.

b) Press the footstand until the connectors snap into place.

c) Adjust the angle of the phone.

Step 4 Plug in the external power supply.

Install Your New Conference Phone (7832)

If your network provides Power over Ethernet (PoE), your conference phone comes with everything you need

to power it up, connect it to the network, and set it up on your desk. If your network does not provide PoE,

you need these additional supplies: a Cisco IP Conference Phone 7832 PoE Midspan Cable and a Cisco Power

Cube 3.

Get Started with Your New Phone

Install Your New Phone (8800 Series) on Webex Calling (formerly Spark Call)

Figure 1: Cisco IP Conference Phone 7832 Installation

Before you begin

Your conference phone needs power from one of these methods:

• Your network supplies power over the Ethernet (PoE).

• You have a Cisco IP Conference Phone 7832 PoE Midspan Cable to add power to your LAN connection.

You plug the cable into the phone, and then plug the LAN and a Cisco Power Cube 3 into the cable.

Procedure

Step 1 Connect the network cable or the midspan cable into the network port on the conference phone.

Step 2 If you are using a midspan cable, do these steps:

a) Plug the power cube into the midspan cable.

b) Plug the power cube into the electrical outlet.

c) Plug the network cable into the midspan cable. Use the network port closest to the power cube connection.

Step 3 Plug the network cable from the phone or the midspan cable into the network.

Complete Your Initial Setup in Cisco Webex Settings

To get started, walk through a few short steps in Cisco Webex Settings. Accept the terms of service and verify

your emergency service address.

Before you begin

By default, your company's address is listed as your emergency service address. Change this value to the

address that you work from most often, such as the location of your home office or other remote site.

It's important that your emergency service address match the physical location of your device.

Procedure

Step 1 Click the get started link in your welcome email to open https://settings.webex.com in your browser.

Step 2 If prompted, set up a new password for your account.

Step 3 Accept the terms of service.

Step 4 Follow the on-screen instructions to set up your services.

Get Started with Your New Phone

Complete Your Initial Setup in Cisco Webex Settings

a) Check the Don't show this page again check box so that the next time you sign in to

https://settings.webex.com, you're brought right to your call settings.

b) Select Personalize Settings.

Step 5 Follow the on-screen instructions to verify and, if needed, change your emergency service address.

Get an Activation Code

To use your device with Cisco Webex, you should have received an email that includes an activation code.

You need to enter this code the first time you sign in to your device. If you can't find the email or if the code

is already expired, you can create a new one.

If your device has a camera, you can either scan the QR code or enter the code manually. If your device doesn’t

have a camera, you must enter the code manually.

Procedure

From Cisco Webex Settings, select Call Settings >Generate Activation Code.

Activate Your Phone Automatically with a QR Code (8845, 8865,

and 8865NR)

If your phone has a camera, you can scan a QR code to activate the phone. If you inadvertently press Enter

manually, press Back to return to the QR code screen.

Before you begin

You need the QR code from your welcome message.

If the code from your welcome message has expired, generate an activation code for your device with Cisco

Webex Settings.

Procedure

Step 1 Make the QR code ready with one of these methods:

• Print the email with the QR code and hold the paper in front of the phone camera.

• Display the QR code on your mobile device and hold the device in front of the phone camera.

• Display the QR code on your computer and hold the phone in front of the computer screen.

Step 2 Turn the ring around the camera clockwise to open the shutter.

Step 3 Scan the QR code.

Get Started with Your New Phone

Get an Activation Code

When the scan succeeds, your phone registers with the server, and you're ready to make your first call.

Activate Your Phone Manually

If your phone does not have a camera, enter the code on the phone screen to activate it.

You can also press Enter manually to enter the code manually instead of scanning the QR code.

Before you begin

You need the QR code from your welcome message.

If the code from your welcome message has expired, generate an activation code for your device with Cisco

Webex Settings.

Procedure

Step 1 Enter your activation code.

Step 2 Press Continue.

Your phone registers with the server, and you're ready to make your first call.

Activate Your Voicemail Account

When you get your phone, you must complete a few steps to get your voicemail up and running.

Before you begin

Familiarize yourself with the rules for setting your voicemail PIN.

Keep in mind that Cisco Webex users cannot set up a second voicemail account.

Procedure

Step 1 From Cisco Webex Settings, go to My Profile, click More , choose Reset Voicemail PIN, and create a

new PIN.

Step 2 Do one of these actions:

• Desk phones—Press Messages .

• Conference phone—Press Messages.

Step 3 Enter the PIN you created and press #.

This completes the voicemail enrollment process.

Get Started with Your New Phone

Activate Your Phone Manually

Voicemail PIN Rules

Your voicemail PIN must meet the following requirements:

• Must be at least six digits long. Numbers only!

• Must not be any of your previous five PINs.

• Must not match the numeric representation of your first or last name.

• Must not contain your extension number.

• Must not contain single or groups of repeated digits (for example, 228883, 121212, or 408408).

• Must not be a numerical sequence (for example, 012345 or 987654).

• Must not contain numbers that are dialed in a straight line on the keypad.

Get Started with Your New Phone

Voicemail PIN Rules

Altri manuali per MCS 7800 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Cisco Telefono IP

Cisco

Cisco Razorline 7975 Manuale utente

Cisco

Cisco 7906G - Unified IP Phone VoIP Manuale di istruzioni

Cisco

Cisco Cisco Unified IP Phone 7960G Manuale utente

Cisco

Cisco 7821/41 Manuale utente

Cisco

Cisco 6825 Manuale utente

Cisco

Cisco Unified 7912G Manuale utente

Cisco

Cisco SPA-500 Series Manuale di istruzioni

Cisco

Cisco Cisco 7960 Manuale utente

Cisco

Cisco 7912 Manuale utente

Cisco

Cisco 8845 Manuale utente

Cisco

Cisco 7961G - IP Phone VoIP Manuale utente

Cisco

Cisco Unified 6921 Manuale di istruzioni

Cisco

Cisco 7941G - Unified IP Phone VoIP Manuale utente

Cisco

Cisco 7945 Series Manuale utente

Cisco

Cisco WIP310 - iPhone Wireless VoIP Phone Manuale utente

Cisco

Cisco Webex 840 Istruzioni operative

Cisco

Cisco 8800 Series Manuale utente

Cisco

Cisco 8811 Manuale utente

Cisco

Cisco 7941G - Unified IP Phone VoIP Manuale di istruzioni

Cisco

Cisco SPA525G - Small Business Pro IP Phone VoIP Manuale utente

Cisco

Cisco IP 7925 Manuale utente

Cisco

Cisco Small Business Pro SPA 508G Manuale utente

Cisco

Cisco 9951 Video Manuale utente

Cisco

Cisco 7841 Scheda informativa del prodotto

Manuali Telefono IP popolari di altre marche

Alcatel

Alcatel 4028 Manuale utente

Polycom

Polycom Polycom VVX 600 Manuale utente

Polycom

Polycom SoundPoint IP 450 Manuale utente

Polycom

Polycom SoundPoint IP 650 Manuale utente

Proximus

Proximus Maestro 3016 IP Manuale utente

Fanvil

Fanvil X4 Manuale utente

Snom

Snom 320 Manuale utente

Yealink

Yealink Yealink SIP-T46G Manuale utente

Avaya

Avaya 4625SW Manuale utente

Yealink

Yealink SIP-T52S Manuale utente

Nortel

Nortel 1140E Manuale utente

Nexotek

Nexotek NT-P500 Manuale utente

Avaya

Avaya Integral 5 R3.0 Manuale utente

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuale utente

Avaya

Avaya 4600 Series Manuale di servizio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuale utente

Nortel

Nortel i2050 Manuale utente

Fiberme

Fiberme FAP260 Series Manuale utente