Cisco SPA500S Manuale utente
QuickStartGuide
Cisco Small Business Pro
SPA500S 32-Button Attendant Console for Cisco
Small Business Pro SPA500 Series IP Phones
Package Contents
•SPA500S 32-Button Attendant Console
•Quick Start Guide
•Attachment Arm
•Attachment Arm Screws (2)
•Auxiliary Interconnect Cable
•Stand
Connecting)to)the)SPA500)Series)IP)Phone)
!
The following procedure describes how to attach the SPA500S to a
SPA500 Series IP Phone.
Step 1 Turn both the SPA500 Series IP Phone and the SPA500S face down.
Step 2 Align the screw hole in the SPA500 Series IP Phone with one of the
holes on the attachment arm.
Step 3 Insert the pegs on the attachment arm into the peg holes on the
SPA500 Series IP Phone.
Step 4 Using an attachment arm screw, secure the attachment arm to the
SPA500 Series IP Phone.
Step 5 Align the right screw hole in the SPA500S with the unused hole on
the attachment arm.
Step 6 Insert the pegs on the attachment arm into the peg holes on the
SPA500S.
Step 7 Using an attachment arm screw, secure the attachment arm to
the SPA500S.
CAUTION
Do not plug a telephone line cord into the AUX port. Use only the auxiliary
cable provided with the SPA500S.
Step 8 Locate the AUX IN port on the back of the SPA500S. Connect
one end of the auxiliary cable to this port.
Step 9 Locate the AUX port on the back of the SPA500 Series IP Phone.
Connect the other end of the auxiliary cable to this port. The
SPA500S is powered by the auxiliary cable with the SPA500
Series IP Phone; no additional power source is required.
Step 10 Route the auxiliary cable inside the cable slot of the SPA500S.
Step 11 Attach the appropriate desktop stand to each unit.
Connecting)a)Second)SPA500S)
!
A maximum of two SPA500S attendant consoles can be connected to a
SPA500 Series IP Phone. The instructions in this section are for
connecting a second SPA500S. If you are not attaching a second
SPA500S, skip to Section 3, Configuring the SPA500S.
Step 1 Attach the first SPA500S to the IP phone and connect the
auxiliary cable as described in Section 1, Connecting to the
SPA500 Series IP Phone.
Step 2 Align the left screw hole in the first SPA500S with one of the
holes on the attachment arm.
Step 3 Insert the pegs on the attachment arm into the peg holes on the
SPA500S.
Step 4 Using the attachment arm screw, secure the attachment arm to
the first SPA500S.
Step 5 Align the right screw hole in the second SPA500S with the
unused hole on the attachment arm.
Step 6 Insert the pegs on the attachment arm into the peg holes on the
SPA500S.
Step 7 Using the attachment arm screw, secure the attachment arm to
the second SPA500S.
CAUTION
Do not plug a telephone line cord into the AUX port. Use only the auxiliary
cable provided with the SPA500S.
Step 8 Locate the AUX OUT port on the back of the first SPA500S. Connect
one end of the auxiliary cable to this port.
Step 9 Locate the AUX IN port on the back of the second SPA500S.
Connect the other end of the auxiliary cable to this port.
Step 10 Route the auxiliary cable inside the cable slot. The SPA500S is
powered by the auxiliary cable with the SPA500 Series IP Phone; no
additional power source is required.
Step 11 Attach the appropriate desktop stands to each unit.
Using)the)SPA500S)
You can press a button on the SPA500S to dial an associated line, pick up
a call ringing at a line, or transfer a call to the line.
NOTE
The options available on the SPA500S depend on the phone system
configuration. Your phone system might not provide all of the features
mentioned in this document.
Monitoring Lines
The LED color of a line button gives you information about the line being
monitored:
•Green: The line is idle.
•Red (steady): The line is in use.
•Red (blinking): The line is ringing.
•Orange (steady): The line is not registered; there is a problem with
phone connectivity.
•Orange (blinking): The line is not configured properly.
•Off: The line is not configured.
Altri manuali per SPA500S
3
Altri manuali Cisco Telefono IP
Cisco
Cisco 8845 Manuale utente
Cisco
Cisco 6901 Standard Manuale utente
Cisco
Cisco 8832 Manuale utente
Cisco
Cisco 7941G - Unified IP Phone VoIP Guida
Cisco
Cisco 8941 Come usare
Cisco
Cisco 7961 Manuale utente
Cisco
Cisco SPA 303 Istruzioni per il montaggio
Cisco
Cisco 7920 - Unified Wireless IP Phone VoIP Manuale utente
Cisco
Cisco 8941 Manuale utente
Cisco
Cisco 8800 Series Guida di riferimento rapido
Cisco
Cisco 8851 Manuale utente
Cisco
Cisco 7906G - Unified IP Phone VoIP Manuale utente
Cisco
Cisco 7841/21 Manuale utente
Cisco
Cisco 7811 Manuale utente
Cisco
Cisco 7965G - Unified IP Phone VoIP Manuale di istruzioni
Cisco
Cisco SPA525G - Small Business Pro IP Phone VoIP Manuale utente
Cisco
Cisco 7941G - Unified IP Phone VoIP Manuale di istruzioni
Cisco
Cisco 504 Manuale utente
Cisco
Cisco DATAVOX 7941 Manuale utente
Cisco
Cisco Unified 6921 Manuale utente
