Cisco SPA504 Manuale utente

Cisco VoIP IP SPA504G

Setup & User Guide

About This Guide

This guide is intended to show you how to install your phone and describes how to

use some of the basic functions and features. The features available on your phone

depend on the type of system to which your phone is connected. Your phone system

might not provide all of the features mentioned in this document. Contact Saco

Technology for questions about phone features.

Installing Your IP Phone

Use these procedures to install the phone and connect it to your network.

STEP 1 Turn the phone body over to expose the ports on the back of the unit.

CAUTION Do not insert a telephone line cord into the auxiliary port.

STEP 2 Insert the long end of the phone cord into the handset port on the phone

body that is marked with a phone symbol.

STEP 3 (Optional) Route the phone cord through the cable slot.

STEP 4 Insert the other end of the phone cord into the port at the bottom of the

handset (not shown).

STEP 5 (Optional) Connect the phone stand by lining up the tabs on the stand with

the slots on the phone body. Slide the bottom tabs into the lower slots on the phone

body and lightly press down on the stand. It should easily slide into the upper stand

slots. Do not force.

STEP 6 If you are using an external power source, insert one end of the power

cord into an outlet and insert the other end of the power cord into the power port on

the phone body.

STEP 7 Connect your phone to the network:

• Using an Ethernet Connection—Insert one end of the Ethernet cable into the

network port on the phone body marked ―SW.‖ Insert the other end of the Ethernet

cable into the appropriate device, such as a network switch, on your network.

•Using a Wireless Connection—You can use a Cisco WBP54G

Wireless-G Bridge with the IP phone to create a wireless

connection between the phone and the network. See the WBP54G

documentation on Cisco.com for more information (see the list of

links at the end of this document).

STEP 8 (Optional) To provide network access to a PC, connect one end of an

additional Ethernet cable (not provided) to the PC port on the back of the phone

body. Connect the other end of the Ethernet cable to the network port on your PC.

After your phone is successfully connected to the network and receives a

basic configuration, your phone line keys should glow green (on models with

phone line keys).

On the SPA502G, you should hear a dial tone when picking up the handset or

pressing the speakerphone button, and the LCD screen displays a phone icon

next to the extension number.

Advance Install of your IP Phone

CAUTION Only follow these steps if advised by a Saco Technology customer service

representative.

Press the setup button on the phone which is directly below the envelope button.

Scroll through the list till you reach the Network option which is numbered as 9. Then

press the select button which appears at the bottom left hand corner of the phone

display.

The phone will then show its current IP address. For example it might say:

10.1.1.9 or 192.168.1.9

Simply make a note of this number as it will be needed in the next step.

Using the number you just wrote down open a internet window and type this in and

then hit enter as the image below shows.

Once you see a Cisco page you need to click the Admin Login button in the top right

hand corner

A new page will load and you will now see a lot more buttons appear. Once they do

simply click on the Ext 1 button

You will now be required to enter your Saco Technology VoIP account information.

Firstly you will need to enter the Saco Technology proxy server which is

did.sacotech.com.au

Then you will need to enter your VoIP SIP/Account Number (In both sections below)

and also your password.

Then the last step is to then enter your VoIP SIP/Account Number again in the User

ID field and to make sure Use Auth ID has yes selected as shown below.

Now simply hit the submit all changes button at the bottom of the page and you

phone will now save the new settings and reset. This can take 30-180 seconds to

perform. Once it is finished your VoIP phone should now have some green lights

appears.

Using the Call Features of the Cisco SPA504G

Placing a Call

There are 2 options available to place a call:

Lift the handset and dial the

number. (This method will

take 5 seconds before it

makes the call)

Dial the number and press

the ―dial‖ soft key.

Answering a Call

There are 2 options available to

answer a call.

Lift the handset.

Press the ―Speakerphone‖ key.

Ending a Call

Hang up the Handset.

Placing a Call on Hold

While on the call:

Press the ―hold‖ button

To return to the call, press the ―hold‖ button again.

Blind Transferring

This feature allows you to transfer a call without speaking to the person you are

transferring to.

While on the call, press the ―xfer‖ key (this will place the caller on hold).

Then simply Dial the VoIP extension you require if transferring to someone in

the office or enter the mobile or landline number to which you want to transfer

the call.

Press the ―dial‖ soft key to transfer the call.

Warm Transferring

This allows you to speak to the person you are transferring to prior to transferring the

call.

While on the call, press the ―xfer‖ key (This will place the caller on hold).

Then simply Dial the VoIP extension you require if transferring to someone in

the office or enter the mobile or landline number to which you want to transfer

the call.

When the second line rings, wait for the party to answer the call, announce

the caller press ―xfer‖ again to connect the two parties.

Hang up or end the call.

Call Forwarding

Press the ―cfwd‖ soft key

Enter the number you would like to forward to and then hit the dial button to

confirm. If successful will display as Calls Forwarded on your screen.

To stop forwarding Press the ―-cfwd‖ soft key.

Simply call *72

And then enter the number you would like to forward to and then hit the dial

button to confirm. If successful it will display as Calls Forwarded on your

screen.

And call *73 to disable call forwarding

Do Not Disturb

To enable Do Not Disturb hit the ―dnd‖ soft key

To disable Do Not Disturb hit the ―-dnd‖ soft key

Accessing Voice Mail

Press

You will then need to enter your SIP/Account Number followed by your password.

Simply call *98 from your VoIP Phone and then enter your SIP/Account Number

followed by your password.

Accessing Voice Mail from a Landline or Mobile

Dial 07 3123 5509 (Will not work from a VoIP phone)

You will then need to enter your SIP/Account Number followed by your password.

Altri manuali per SPA504

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Cisco Telefono IP

Cisco

Cisco 3911 Manuale utente

Cisco

Cisco 8800 Series Manuale utente

Cisco

Cisco SPA 509G Manuale di istruzioni

Cisco

Cisco Cisco 7940 Manuale di istruzioni

Cisco

Cisco 7941G - Unified IP Phone VoIP Manuale utente

Cisco

Cisco 7841 Manuale utente

Cisco

Cisco 7975G - Unified IP Phone VoIP Manuale utente

Cisco

Cisco MCS 7800 Series Manuale utente

Cisco

Cisco 3905 Manuale utente

Cisco

Cisco Unified 7905G Manuale utente

Cisco

Cisco SPA50X Manuale utente

Cisco

Cisco SPA525G - Small Business Pro IP Phone VoIP Manuale utente

Cisco

Cisco 7965 Manuale utente

Cisco

Cisco 7945 Series Manuale utente

Cisco

Cisco 9711 Manuale utente

Cisco

Cisco 7911 Manuale utente

Cisco

Cisco 7832 Manuale utente

Cisco

Cisco 8800 Series Manuale utente

Cisco

Cisco 7841 Guida di riferimento

Cisco

Cisco DATAVOX 7941 Manuale utente

Cisco

Cisco 7961 Manuale utente

Cisco

Cisco Cisco Unified IP Phone 7960G Manuale utente

Cisco

Cisco 8821 Manuale utente

Cisco

Cisco MCS 7800 Series Manuale utente

Manuali Telefono IP popolari di altre marche

Alcatel

Alcatel 4028 Manuale utente

Polycom

Polycom Polycom VVX 600 Manuale utente

Polycom

Polycom SoundPoint IP 450 Manuale utente

Polycom

Polycom SoundPoint IP 650 Manuale utente

Proximus

Proximus Maestro 3016 IP Manuale utente

Fanvil

Fanvil X4 Manuale utente

Snom

Snom 320 Manuale utente

Yealink

Yealink Yealink SIP-T46G Manuale utente

Avaya

Avaya 4625SW Manuale utente

Yealink

Yealink SIP-T52S Manuale utente

Nortel

Nortel 1140E Manuale utente

Nexotek

Nexotek NT-P500 Manuale utente

Avaya

Avaya Integral 5 R3.0 Manuale utente

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuale utente

Avaya

Avaya 4600 Series Manuale di servizio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuale utente

Nortel

Nortel i2050 Manuale utente

Fiberme

Fiberme FAP260 Series Manuale utente