Cisco LINKSYS ADSL2MUE Manuale utente
Model No.
Quick Installation Guide
A Division of Cisco Systems, Inc.
®
WIRED
ADSL2MUE (EU/LA)
with USB and Ethernet
ADSL2 Modem
Package Contents
•ADSL2Modem
• Power Adapter
•USBCable
• CAT 5 Ethernet Network Cable
• RJ-11 Phone Cable
• User Guide and USB Drivers CD-ROM
• Quick Installation
2
In Step 1, you will connect the Modem to your ADSL line and to a computer
in your home or business. Use Step 1A to connect the Modem using an
Ethernet connection or use Step 1B to connect the Modem using a USB
connection.
First, make sure that all the devices that you’ll be working with are powered
down, including your PC and the Modem.
Connect the Modem with Ethernet
AConnect one end of the
provided phone cable to the
ADSL (RJ-11 phone) port that is
on the back of the Modem.
BConnect the other end of the
phone cable to the wall jack
with ADSL service. (A splitter
may be required. Contact your
Internet Service Provider for
more information.)
CConnect one end of the
provided Ethernet cable to
your PC’s Ethernet port. (C1)
A
B
C1
1Connecting the Modem
1A
3
Connect the other end of the
cable to the Ethernet port on
the back of the Modem. (C2)
DConnect the power adapter to
the Modem and to the
electrical outlet. Turn on the
Modem.
ETurn on your PC.
The installation of the Modem with
an Ethernet Connection is
complete. If you need to configure
your Modem, refer to Section 3.
C2
D
IMPORTANT:
Based upon the
requirements in your country, you should
make sure to only place the microfilters
between the phone and the wall jack and
not between the Modem and the wall jack.
NOTE:
A small device called a microfilter
(not included) may be necessary between
each phone and wall jack to prevent
interference. Contact your ISP if you have
any questions.
4
AConnect one end of the phone
to the ADSL (RJ-11 phone) port
on the back of the Modem.
BConnect the other end of the
phone to the wall jack with ADSL
service.
CConnect the power adapter to
the Modem (C) and to the
electrical outlet.
DConnect one end of the USB to
the USB port on the back of the
ADSL Modem and the other
end to the USB port on your PC.
ETurn on the Modem.
Proceed to Step 2: Installing the USB
Driver.
Connect the Modem with USB
A
NOTE: To use a USB connection, your
PC must use Windows 98SE, Me,
2000, or XP. The USB port is not
supported on other operating systems.
B
C
D
IMPORTANT:
Based upon the
requirements in your country, you should
make sure to only place the microfilters
between the phone and the wall jack and
not between the Modem and the wall jack.
NOTE:
A small device called a microfilter
(not included) may be necessary between
each phone and wall jack to prevent
interference. Contact your ISP if you have
any questions.
1B
5
Model No.
If you are connecting the Modem to
your computer using the USB port,
then you will need to install the USB
driver. Proceed to the section for
your PC’s Windows operating system.
Windows XP
APower on your computer.
BWindows XP will automatically
detect the Modem. Insert the
User Guide and USB Drivers CD-
ROM into your computer’s CD-
ROM drive.
COn the first screen of the Found
New Hardware Wizard, select
Install the software
automatically
(Recommended), and click
Next.
DPlease wait while Windows XP
finds and automatically installs
the driver. When Windows XP
has finished installing the driver,
the screen shown in Figure D
will disappear.
Installation is complete. If you
need to configure your Modem,
refer to refer to Section 3.
D
C
Installing the USB Driver
2
6
Windows 2000
APower on your computer.
BWindows 2000 will
automatically detect the
Modem. Insert the User Guide
and USB Drivers CD-ROM into
your computer’s CD-ROM
drive.
COn the first screen of the Found
New Hardware Wizard, click
Next.
DSelect Search for a suitable
driver for my device
(recommended). Then click
Next.
ESelect CD-ROM drives, and
click Next.
FOn the Driver Files Search
Results screen, click Next.
GYou may see a Windows Digital
Signature warning. As this
product has been tested to
work with Windows, you may
continue.
HWhen Windows 2000 has
finished installing the driver,
click Finish.
Installation is complete. If you
need to configure your Modem,
refer to refer to Section 3.
D
C
E
F
7
C
Windows Millennium
APower on your computer.
BWindows Millennium will
automatically detect the
Modem. Insert the User Guide
and USB Drivers CD-ROM into
your computer’s CD-ROM
drive.
COn the first screen of the Add
New Hardware Wizard, select
Automatic search for a better
driver (Recommended). Then
click Next.
DPlease wait while Windows
Millennium finds and
automatically installs the driver.
When Windows Millennium has
finished installing the driver,
click Finish.
Installation is complete. If you
need to configure your Modem,
refer to refer to Section 3.
D
8
Windows 98
APower on your computer.
BWindows 98 will automatically
detect the Modem. Insert the
User Guide and USB Drivers CD-
ROM into your computer’s CD-
ROM drive.
COn the first screen of the Add
New Hardware Wizard, click
Next.
DSelect Search for the best
driver for your device
(Recommended). Then click
Next.
ESelect CD-ROM drive. Then
click Next.
FSelect The updated driver
(Recommended). Then click
Next.
GAfter Windows 98 has found
the driver, click Next.
HWhen Windows 98 has finished
installing the driver, click Finish.
Installation is complete. If you
need to configure your Modem,
refer to refer to Section 3.
D
E
9
Overview
The ADSL2 Modem has been
designed to be functional right out
of the box, with the default settings.
However, if you'd like to change
these settings, the ADSL2 Modem
can be configured through your
web browser with the Web-Based
Utility. This chapter explains how to
configure the ADSL2 Modem in this
manner.
Open your web browser and enter
192.168.1.1. in the web browser’s
Address field. (It is all right if you get
an error message at this point.) Press
the Enter key and the following
screen will appear. Enter admin in
lowercase letters in the User Name
field, and enter admin in lowercase
letters in the Password field (admin is
the default user name and
password.) You can set a new
password from the Security tab.
Configuring the Modem
3
NOTE:Before you open your web browser,
you may need to set your PC to a static IP
Address. Refer to the Troubleshooting
section in the User Guide.
Login screen
NOTE: Contact your Internet Service
Provider for the Internet setup information.
10
Basic Setup
The first screen that appears displays
the Setup tab. This allows you to
change the ADSL2 Modem's general
settings. Change these settings as
described here and click the Save
Settings button to apply your
changes or Cancel Changes to
cancel your changes.
Internet Setup
Based on the setup instructions from
your ISP, you may need to provide
the following information.
Virtual Circuit ID (VPI and VCI).
These fields consist of two items: VPI
(Virtual Path Identifier) and VCI (Virtual
Channel Identifier). Your ISP will
provide the correct settings for each
field.
Multiplexing. Select LLC or VC ,
depending on your ISP.
Encapsulation. The Modem
supports four Encapsulations
(Internet connection types): RFC
1483 Bridged, RFC 2516 PPPoE, RFC
2364 PPPoA, and Bridged Mode
Only. Each Basic Setup screen and
available features will differ
depending on what type of
encapsulation you select. The
encapsulations are described
below.
Indice
Lingue:
Altri manuali Cisco Modem
Cisco
Cisco WRE54G Manuale utente
Cisco
Cisco LINKSYS AM200 Istruzioni operative originali
Cisco
Cisco 3848 Manuale utente
Cisco
Cisco DPC3216 Manuale utente
Cisco
Cisco 605 Manuale utente
Cisco
Cisco uBR904 Manuale di istruzioni
Cisco
Cisco DPC2203 Manuale utente
Cisco
Cisco WAP300N Manuale utente
Cisco
Cisco EPC3208G EuroDOCSIS 3.0 8x4 Manuale utente
Cisco
Cisco SPA122 ATA Manuale utente
Cisco
Cisco BWX 120 Manuale utente
Cisco
Cisco DPC2505 Manuale utente
Cisco
Cisco DPX2203 Manuale utente
Cisco
Cisco DPC3000 Manuale utente
Cisco
Cisco DPH153 Manuale utente
Cisco
Cisco DPC3212 Manuale utente
Cisco
Cisco Linksys DPC3008 Manuale utente
Cisco
Cisco DPC3000 Manuale utente
Cisco
Cisco DPQ2160 Manuale utente
Cisco
Cisco BWX360 WiMAX Manuale utente
