Cisco Linksys WRT54G3G Manuale utente
A Division of Cisco Systems, Inc.
®
Model No.
Model No.
Wireless Quick Installation Guide
Wireless
1
Quick Installation Guide
Model No.
WRT54G3G (EU)
24
,GHz
802.11g
Router for 3G/UMTS Broadband
Wireless-G
Package Contents
• Wireless-G Router for 3G/UMTS Broadband
• Setup CD-ROM
• Quick Installation Guide
•UserGuideonCD-ROM
• Power Adapter
• 2 x RJ-45 Ethernet Cables
2
1
AInsert the Setup CD-ROM into
your CD-ROM drive. The Setup
Wizard should run automatically
and the Welcome screen should
appear. If it does not, click Start
and then Run. In the field
provided, enter
D:\WRT54G3G.exe (if “D” is the
letter of your CD ROM drive).
The Setup Wizard automatically
detects the operating system’s
country setting and selects the
Wizard language according to it.
You can manually select the
desired language via the drop-
down menu.
BClick Next to begin the setup
process.
CPress Click Here to Start to start
the setup process. Click User
Guide to go to the User Guide, or
click Exit to stop the setup
process.
DClick the appropriate radio
button:
a. 3G/UMTS or GPRS Only for
use of the Router with
3G/UMTS or GPRS Service,
proceed to step 2.
b. Broadband WAN Only for
use of the Router with a
broadband cable/DSL
network, proceed to step 3.
c. Broadband WAN and
3G/UMTS or GPRS for use of
the Router with both network
types, proceed to step 4.
Configuring the WRT54G3G via
the Setup Wizard
D
C
A
3
ABefore you begin, make sure
that you have your Vodafone
Mobile Connect Card Services
information, which was supplied
with your Mobile Connect Card
package at the time of
purchase. If you do not have this
information, call Vodafone
Customer Services. The contact
information is in the Vodafone
Mobile Connect Card package.
BMake sure that the 3G/UMTS
Router is powered off.
CInsert your Vodafone SIM Card
into your Vodafone Mobile
Connect 3G/UMTS Card,
following your card’s instructions.
DInsert your Vodafone Mobile
Connect 3G/UMTS Card.
EPlug the other end of the network
cable into one of the Router’s
yellow ports numbered 1 to 4.
FConnect the power adapter to
the Router's Power port and the
other end to an electrical outlet.
GMake sure the Power, Internet
and 3G/UMTS LEDs on the front
panel light up green.
HThe Power LED will flash green for
a few seconds when the Router
goes through its self-diagnostics
test. This LED will stay solidly lit
when the self-test is complete. If
it does not stop flashing, refer to
“Appendix A: Troubleshooting” of
the User Guide on the Setup CD.
Proceed to step 5.
E
2WRT54G3G Setup for 3G/UMTS or
GPRS Network Only
D
F
4
AMake sure that the 3G/UMTS
Router is powered off.
BDisconnect the cable that
connects your cable or DSL
modem to your PC.
CPlug the cable from the modem
into the Router’s blue Internet
port. This is the same cable that
you just disconnected from your
computer.
DThe Router comes with a yellow
network cable. Plug one end of
the network cable into your
computer's network port. Your
computer's network port is the
same port that was previously
connected to the modem.
EPlug the other end of the network
cable into one of the Router’s
yellow ports numbered 1 to 4.
E
C
B
3WRT54G3G Setup for
Broadband WAN Only
D
5
FConnect the power adapter to
the Router's Power port and the
other end to an electrical outlet.
GOn the Router's front panel, the
Power, Internet, and at least one
of the numbered (1, 2, 3 or 4)
LEDs should be lit. If not make
sure the cables are securely
connected.
Proceed to step 6.
G
F
6
ABefore you begin, make sure
that you have your Vodafone
Mobile Connect Card Services
information, which was supplied
with your Mobile Connect Card
package at the time of
purchase. If you do not have this
information, call Vodafone
Customer Services. The contact
information is in the Vodafone
Mobile Connect Card package.
BMake sure that the 3G/UMTS
Router is powered off.
CInsert your Vodafone SIM Card
into your Vodafone Mobile
Connect 3G/UMTS Card,
following your card’s instructions.
DInsert your Vodafone Mobile
Connect 3G/UMTS Card.
EDisconnect the cable that
connects your cable or DSL
modem to your PC.
FPlug the cable from the modem
into the Router’s blue Internet
port. This is the same cable that
you just disconnected from your
computer.
GPlug the other end of the network
cable into one of the Router’s
yellow ports numbered 1 to 4.
D
E
4WRT54G3G Setup for Broadband
WAN and 3G/UMTS or GPRS
F
G
7
HPlug the other end of the network
cable into one of the Router’s
yellow ports numbered 1 to 4.
IConnect the power adapter to
the Router's Power port and the
other end to an electrical outlet.
JOn the Router's front panel, the
Power, Internet, and at least one
of the numbered (1, 2, 3 or 4)
LEDs should be lit. If not make
sure the cables are securely
connected.
Proceed to step 5.
J
I
H
8
AIf the Mobile Connect Card is
not inserted or recognized, you
will be prompted to insert a
Vodafone Mobile Connect
3G/UMTS Card. If you wish to
configure the Router without your
Vodafone Mobile Connect
3G/UMTS Card, proceed to step
7; otherwise, insert a Vodafone
Mobile Connect 3G/UMTS Card
with the SIM card already
inserted, and proceed to step B.
BIf a SIM card is not inserted into
the Vodafone Mobile Connect
3G/UMTS Card, the message in
Figure B will be displayed, and
you will be prompted to check
that the SIM card is correctly
inserted. Click the OK button.
If you wish to configure the
Router without a SIM card,
proceed to step 7; otherwise,
insert the SIM card into your
Vodafone Mobile Connect
3G/UMTS Card, and proceed to
step C.
CThe vendor ID and firmware
version settings are checked. If
your Vodafone Mobile Connect
Card needs to be upgraded, the
screen shown in Figure C will be
appear. Follow the on-screen
instructions.
5Configuring the Vodafone
3G/UMTS or GPRS Service
C
A
B
9
DBased on the SIM country
settings, the following information
will be displayed:
a. Home Network
b. Service
c. 3G/UMTS/GPRS connection
d. APN
e. Username (country
dependent)
f. Password (country
dependent)
g. Pin code (SIM card
dependent)
Choose:
• the required Service option.
• the required Connect
method.
EThe selected settings are
displayed, as shown in Figure E.
Click Confirm and follow the
appropriate instructions:
• Vodafone 3G/UMTS Only -
proceed to step7.
• Broadband WAN Only or
Broadband WAN and
3G/UMTS or GPRS - Proceed
to step 6.
D
E
10
AStatic IP. If your ISP assigns you a
static IP address, select Static IP
from the drop-down menu.
Complete the Internet IP
Address, Subnet Mask, Gateway,
and DNS fields. You need to
enter at least one DNS address.
BPPPoE. If you are connecting
through PPPoE, select PPPoE from
the menu. Complete the User
Name and Password fields. Enter
the password again the Confirm
field.
CCable (DHCP). If you are
connecting through DHCP or a
dynamic IP address from your ISP,
keep this default setting. If you
want to make changes to the
default DHCP setting, select the
appropriate Internet type and
complete the requested fields. If
you are unsure about these
settings, do not change them.
DClick Save to save your settings.
Proceed to step 7.
6Configure the Broadband WAN
Service (Internet Port)
NOTE: If the Internet connection type
you use is not listed here, keep the default,
Cable (DHCP) for now, and click the Next
button. After you have completed the Setup
Wizard, you will use the Router’s Web-
based Utility to configure the Internet
connection type settings. Refer to the User
Guide on the Setup CD-ROM for
instructions. A
B
C
D
Altri manuali per Linksys WRT54G3G
1
Indice
Altri manuali Cisco Router di rete
Cisco
Cisco SGE2000 Manuale utente
Cisco
Cisco 7201 Manuale utente
Cisco
Cisco NCS 540 Manuale
Cisco
Cisco Router Cisco 831 Manuale
Cisco
Cisco WET54G Manuale utente
Cisco
Cisco NCS 4216 Manuale di istruzioni
Cisco
Cisco 4430 Manuale utente
Cisco
Cisco 871 Guida di sicurezza
Cisco
Cisco 3600 Series Guida rapida
Cisco
Cisco ASR 1013 Manuale utente
Cisco
Cisco 2515-RF - 2515 Router Manuale utente
Cisco
Cisco ASR 920 series Manuale utente
Cisco
Cisco CGR 1120 Manuale utente
Cisco
Cisco 7609-S Manuale utente
Cisco
Cisco SFE2010 Manuale utente
Cisco
Cisco 1801 Manuale utente
Cisco
Cisco ASR1002 - ASR 1002 Router Manuale utente
Cisco
Cisco 1711 - Security Access Router Manuale utente
Cisco
Cisco Universal Broadband Router Cisco uBR10012 Manuale
Cisco
Cisco 851-K9 - 851 Integrated Services Router Manuale utente
