Cisco Smart+Connected Remote 250 Manuale utente

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco Smart+Connected Remote 250 Reference

Guide

This document includes the following information about the Cisco Smart+Connected Remote 250:

• Introduction, page 2

• Install and Maintain the Disposable the Batteries, page 3

• Install and Use the Optional Recharging Kit, page 4

• Configure the Remote Control, page 11

• Program Remote Paging, page 13

• Resetting the Device to Factory Settings, page 14

• Specifications, page 14

• Regulatory/Safety Information, page 16

• Related Documentation, page 16

• Warranty, page 17

• Service and Support, page 17

Cisco Smart+Connected Remote 250 Reference Guide

OL-27366-02

Introduction

The Cisco Smart+Connected Remote 250 (SCH-REMOTE-250) allows residents to control automation

features and manage their personal audio and video equipment from anywhere in the residence. The

Cisco Remote 250 is used with an on-screen navigator (such as a television) and includes an LED display

for complete residential control using only the remote.

The Cisco Remote 250 provides wireless connectivity of any intelligent device from anywhere in the

residence. Line of sight is not required the—remote does not have to be pointed at the TV or Cisco

Controller.

Figure 1 Cisco Remote 250

The Cisco Remote 250 offers:

• Bi-directional communication — Two-way communication with the Cisco Controller to provide

status information as well as control of any connected device.

• Ease of use — High-visibility screen and backlit keys for easy use in any lighting conditions.

Complete control in a small package that fits perfectly in your hand.

• Anything control — Control an entire residential automation system with this compact remote. No

additional remote controls are needed in the residence.

• Quick access control — Residents can press a single button to turn on their audio-video gear and

play their favorite movies or music.

• Ready to use worldwide with international icons on buttons providing a simplified and intuitive user

experience for all remote control activities.

• Recommended for use with the Cisco Controller 250 and Cisco Controller 800.

Cisco Smart+Connected Remote 250 Reference Guide

OL-27366-02

Install and Maintain the Disposable the Batteries

Install the Batteries

Install the four (4) AA batteries (included) into the back of the Cisco Remote 250. Insert them according

to the diagram provided in the battery compartment (with the + and - terminals aligned correctly).

Battery Use and Care Tips

• Keep the battery contacts and compartment clean.

• Remove the batteries from the product if it is not going to be used for several months.

• Extreme temperatures reduce battery performance. Avoid putting the Cisco Remote 250 in very

warm places.

Battery Replacement and Safety Rules

Caution To prevent a battery short, leakage or rupture:

• Use typical AAA Alkaline batteries only.

• Do not mix battery types, such as Alkaline and rechargeable NiMH batteries.

• Do not attempt to recharge a battery unless the battery is specifically marked “rechargeable.”

• Never dispose of batteries in a fire.

ATTENTION! Pour empe^cher court-circuiter, fuite ou rupture de batterie:

• Utilisez les accumulateurs alcalins typiques d’AAA seulement.

• Ne me´langez pas les types de batterie, tels que les batteries alkalines et rechargeables de NiMH.

• N’essayez pas de recharger une batterie a` moins que la batterie soit spe´cifiquement marque´ «

rechargeable ».

• Ne vous de´barassez jamais des batteries dans un feu.

• Ne vous débarassez jamais des batteries dans un feu.

VORSICHT! Das Batteriekurzschluß, -durchsickern oder -abbruch verhindern:

• Benutzen Sie AAA alkalische Batterien nur im Schalter.

• Mischen Sie nicht Batteriearten, wie alkalische und nachladbare NiMH Batterien.

• Versuchen Sie nicht, eine Batterie neuzuladen, es sei denn die Batterie ist spezifisch gekennzeichnetes

„nachladbares.“

• Entledigen Sie nie sich Batterien in einem Feuer.

Cisco Smart+Connected Remote 250 Reference Guide

OL-27366-02

Install and Use the Optional Recharging Kit

An optional Cisco Remote Charging Station with a rechargeable battery is available to ensure a fully

charged battery at all times. If the battery level drops, simply place the remote in the station until the

remote is fully charged and ready to use again. These items are purchased seperatly.

See the following for more information:

• Ordering Information, page 5

• What’s in the Box?, page 5

• Installing the Remote Charging Kit, page 5

• Recharging Station Lights, page 10

• Set Up Your Existing Remote for the Recharging Station, page 10

Figure 2 Cisco Smart+Connected Remote Charging Station

Note A lithium polymer rechargeable battery is used in this product. See the “Specifications” section on

page 14 for more information.

Note We recommend that you keep the remote on the recharging station when not in use.

Cisco Smart+Connected Remote 250 Reference Guide

OL-27366-02

Install and Use the Optional Recharging Kit

Ordering Information

Ta b l e 1 Cisco Smart+Connected Remote 150 Recharging Kit

Product Name Part Number

Cisco Smart+Connected Remote 250 Recharging Kit

Note The Recharging Kit includes a charging station, rechargeable

battery and new back cover plate for the remote.

SCH-REMOTE-250-CHK

Cisco Smart+Connected Remote 250 Rechargeable Battery and Cover

only

SCH-REMOTE-250-BPK

What’s in the Box?

The recharging station is sold and shipped in a seperate box (it is not included in the Cisco Remote box).

Make sure the following items are in the box:

• Recharging Station Cradle

• Power Supply

• Rechargeable Battery (Lithium Polymer)

• Battery Cover

• Warranty Card

Installing the Remote Charging Kit

Note IMPORTANT! The remote must be used in a project running release 2.5.0 or later to properly indicate

the battery level; otherwise, a “Low Battery Warning” alert will appear (if an alert is configured) or in

the Cisco Remote 250 window.

Cisco Smart+Connected Remote 250 Reference Guide

OL-27366-02

Install and Use the Optional Recharging Kit

Procedure

Step 1 Remove the old batteries from your new or existing remote.

a. Turn the remote upside down. On the bottom of the remote, pull the battery cover toward you with

your thumb and lift it off of the remote (Figure 3).

Figure 3 Remove the Battery Cover

b. With your fingertip, pull out the old batteries (Figure 4).

Figure 4 Remove the Old Batteries

Cisco Smart+Connected Remote 250 Reference Guide

OL-27366-02

Install and Use the Optional Recharging Kit

Step 2 Insert the rechargeable battery into your new or existing remote.

a. On the bottom of the remote (with the cover off and the old batteries taken out), insert the

rechargeable battery by sliding the small end into the slot first (Figure 3). Note the orientation of +

and - symbols for proper battery insertion (Figure 5).

Figure 5 Rechargable Battery

b. Seat the battery securely into the slot and push down (Figure 6).

Figure 6 Battery Installed

Step 3 Place the new cover on your existing remote.

If you’ve purchased a new remote with your recharging station, follow Step 2; otherwise, follow both

steps.

Note If you are using an existing remote with the new battery cover, it will appear that the paint color

and texturing may be different. With normal usage, the new battery cover color and texture will

blend to match the remote control. You should expect this to occur over a period of 1-2 months.

a. Insert the remote’s new battery cover into the remote. Notice the two metal plates on the cover; that’s

how you can differentiate the old cover from the new one (Figure 7).

Cisco Smart+Connected Remote 250 Reference Guide

OL-27366-02

Install and Use the Optional Recharging Kit

Figure 7 Replace the Cover

b. Slide the battery cover into the slot and then push down until the cover is horizontal. Slide the cover

into the slot until it snaps into place.

Step 4 Attach the power supply to your recharging station

This section applies to recharging stations for existing or new remotes.

a. Insert the small end of the USB cable into the back of the recharging station (inside the indentation)

and thread the power cord through the indentation in the station (Figure 8).

Note You can thread the cord straight out or wind it around to the opposite end of the recharging

station.

Figure 8 Insert Power Cordthe Cover

b. Attach the USB cable to the power supply.

–

Remove the plastic shield from the power supply.

–

Attach the correct power plug adapter to the power supply by sliding it into the power supply’s

slot until it clicks into place.

–

(Optional) To remove the power plug adapter, press the Push button and slide the plug out.

Cisco Smart+Connected Remote 250 Reference Guide

OL-27366-02

Install and Use the Optional Recharging Kit

c. Insert the power plug into a power outlet to begin recharging.

d. For convenience, place the recharging station close to where you use your remote.

Step 5 Set the charging indicator on your recharging station

This section applies to recharging stations for existing or new remotes.

a. Turn the recharging station over.

b. Notice the Charging Indicator button labeled ‘High, Off, and Low’ (Figure 9).

Figure 9 Charging Indicator Button

c. Move the button to the desired light level.

–

High—Sets to the highest light level.

–

Off—Sets the light to off.

–

Low—Sets the light to low.

d. Turn the recharging station over to its upright position.

Step 6 Place the Remote on Your Recharging Station

This section applies to recharging stations for existing or new remotes.

a. If you purchased a recharging station without a remote, ensure that you’ve replaced your old

batteries with the new rechargeable batteries and new cover.

b. While holding the remote in a horizontal position, place it onto the charging station.

c. Ensure that it is properly seated. The two metal plates on the back of the remote must touch the metal

pins in the recharging station (Figure 10). Depending on your light setting an indicator light may

come on at the bottom of the recharging station. ().

Cisco Smart+Connected Remote 250 Reference Guide

OL-27366-02

Install and Use the Optional Recharging Kit

Figure 10 Ensure Proper Installation

Recharging Station Lights

This section applies to recharging stations for existing or new remotes.

Depending on the Charging Indicator brightness you select, the indicator light will be High or Low

brightness or Black/Off. When your recharging station is on, you may see the following lights.

• Red—The remote is recharging, and is not fully charged yet.

• Green—The remote is fully charged.

• Black—The light is off. Either the Charging Indicator is turned off, or the remote is not seated

properly in the recharging station.

Set Up Your Existing Remote for the Recharging Station

You must update your remote to recognize the new rechargeable battery.

(Optional) You can check Enable Recharge Station in Composer Pro (SR-150 or SR-250 remote

Properties page) to acknowledge the battery. This view also shows you the percent battery level.

Cisco Remote 250 (Online)

If you have a Cisco Remote 250 that is online, follow these steps:

1. On the remote, press List.

2. Press Info.

3. Press Config.

4. Select Recharge Station.

5. Press Yes.

Indice

Altri manuali Cisco Telecomando

Cisco

Cisco Z8 series Manuale utente

Cisco

Cisco AT6420 Manuale utente

Cisco

Cisco TelePresence TRC6 Manuale utente

Cisco

Cisco TRC 5 Manuale utente

Cisco

Cisco AllTouch AT6400 Manuale utente

Cisco

Cisco CTC TV Manuale utente

Cisco

Cisco AllTouch AT6400 Manuale utente

Cisco

Cisco HDA-IR2.2 Manuale utente

Cisco

Cisco TelePresence SX10 Manuale utente

Cisco

Cisco Z22 Manuale utente

Cisco

Cisco TRC6 Manuale utente

Cisco

Cisco DMRW1000 - Controller / Wireless-N Touchscreen Remote... Manuale utente

Cisco

Cisco TelePresence SX10 Manuale utente

Cisco

Cisco Remote Control Manuale utente

Cisco

Cisco AT3400 AllTouch Manuale utente

Cisco

Cisco AT8560 Manuale utente

Cisco

Cisco DMRW1000 - Controller / Wireless-N Touchscreen Remote... Manuale utente

Cisco

Cisco AllTouch AT6400 Manuale utente

Cisco

Cisco LINKSYS DMRIR500 Manuale utente

Cisco

Cisco AllTouch AT6400 Manuale utente

Cisco

Cisco AllTouch AT6400 Manuale utente

Cisco

Cisco AT 6400 All Touch Manuale utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione