Cisco MS420-24 Manuale utente

MS420 Series (EOS) Installation Guide

On Aug 1, 2016, Cisco Meraki announced the end-of-sale date for the MS420 series switch will be

Oct 31, 2016. The end-of-support date is Oct 31, 2023.

Read more about our Product End-of-Life (EOL) Policy.

Models

Model number Description

MS420-24

Layer-3 24-port 10Gbe SFP+ aggregation switch

with 1 management interface and hot-swappable

power supplies / fans

MS420-48

Layer-3 48-port 10Gbe SFP+ aggregation switch

with 1 management interface and hot-swappable

power supplies / fans

Package contents

In addition to the MS switch, the following are provided (mounting kit provided with 1U models only):

MS420-24 Series front panel

MS420-48 Series front panel

MS420 Series back panel

Power input The MS comes standard with US power cord. EU/

UK/AU power cords may be ordered separately.

Ports and Status Indicators

The MS uses LEDs to inform the user of the device's status. When the device powers on, the main LED will be amber.

Additional functions are described below, from left to right.

Item Function LED Status Meaning

1 Restore N/A

Restore button to clear

switch IP and local

configuration settings

2 Fan Orange

One or more of the

system fans has

malfunctioned or is

missing

3 Power (PSU) Orange

One of the system

PSUs (power supplies)

has malfunctioned or is

missing

2Status Orange

Switch is unable to or

has not yet connected

to the Meraki cloud

Flashing green Firmware upgrade in

process

White

Switch is fully

operational and

connected to the

Meraki cloud

Alternating

Switch is booting,

searching for uplink to

Meraki Cloud

Off Switch does not have

power

3 Switch Port LEDs Off No client connected

Solid orange 10/100/1000 Mbps

Solid green 10,000 Mbps (10Gbps)

In addition, there is a RESTORE button available on the front panel.

Insert a paper clip if a restore is required.

• A brief, momentary press: To delete a downloaded configuration and reboot.

• Press and hold for more than 10 sec: To force the unit into a full factory restore.

Management Port

This port is designed to access the local switch configuration page only. For more information on local configuration,

please see Local Configuration.

The management port can not be used as a standard switched port

The MS420 series will ship with all accessories, including fans and two power supplies. Additional accessories, including

fans and power supplies, can be purchased separately.

Equipment is to be used only in a restricted access location and installed/operated only by trained service personnel.

Bringing your Stack Online

When connecting up your MS420 for the first time the ports are set as ethernet. Once they're online you can convert the

port to a Stack port by simply selecting the option under the interface configuration as shown below:

It's recommended to bring the MS420's online using an uplink on each switch and configuring the port for Stacking prior

to connecting the stack links. This will allow for config sync as well as firmware upgrade. The switches will blink a white

status LED during upgrade so it should be visibly obvious that they're upgrade. When the Switch has a steady White

Light it's connected and ready to continue so the stacking connections can be added.

Mounting hardware

The mounting hardware includes a rack mount rail kit for standard 1U racks. When installing the device, make sure that

there is sufficient space between the rear of the rack and other obstacles to ensure adequate airflow.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Cisco Interruttore

Cisco

Cisco Firepower 8120 Manuale utente

Cisco

Cisco CSS-11051-AC Manuale

Cisco

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module... Manuale utente

Cisco

Cisco IE 3000 Manuale

Cisco

Cisco MS200X-24 Manuale utente

Cisco

Cisco 4900M - Catalyst Switch Manuale utente

Cisco

Cisco 6503 - Catalyst Firewall Security Sys Manuale utente

Cisco

Cisco Linksys SGE2000P Manuale utente

Cisco

Cisco AJ732A - MDS 9134 Fabric Switch Manuale utente

Cisco

Cisco Nexus 93180YC-FX3 Manuale

Cisco

Cisco Catalyst 9500 Series Manuale utente

Cisco

Cisco Nexus 6000 Manuale utente

Cisco

Cisco SRW248G4 - Small Business Managed Switch Manuale utente

Cisco

Cisco Nexus 9000 Series Manuale utente

Cisco

Cisco SRW2008MP Manuale utente

Cisco

Cisco WS-CBS3032-DEL Manuale utente

Cisco

Cisco NM-16ESW-PWR= Manuale operativo e di manutenzione

Cisco

Cisco Nexus 3548 series Manuale di installazione

Cisco

Cisco MDS 9000 Series Manuale utente

Cisco

Cisco Catalyst Express 500-24LC Manuale di istruzioni

Cisco

Cisco Catalyst 9500 Series Manuale

Cisco

Cisco Cisco mds 9124 - fabric switch Manuale utente

Cisco

Cisco 9000 Series Manuale di istruzioni

Cisco

Cisco Catalyst 3650 Manuale di installazione

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente