Clare Controls ClareVision Come usare

Doc ID 2014-01-430 • Rev 01 1 / 6

ClareVision IP CCTV

Camera Integration

Release Notes

Content

Introduction...1!

Installing the ClareVision IP cameras...2!

Connecting the ClareVision IP cameras to the ClareHome data network...3!

Configuring in Fusion...3!

Contact information...6!

Introduction

ClareVision’s newest line of IP CCTV cameras have been tested and certified for

integration with the ClareHome system. These cameras include the Proline

motorized varifocal (P-series), Mainline varifocal (M-series), and Affordable

fixed-lens cameras (B-series).

The ClareVision cameras integrate with the ClareHome system in a way similar

to other integrations. All camera integrations share a common UI, so that the

user experience is consistent.

Camera settings can be controlled via events. Use Fusion’s Scenes and Rules to

automate the actions your customers want. The following figure shows the

ClareVision camera display docked in the ClareHome UI.

Doc ID 2014-01-430 • Rev 01 2 / 6

Figure 1: ClareVision camera display on the UI

Installing the ClareVision IP cameras

Only a qualified installation technician should install the ClareVision IP cameras.

Refer to the installation and setup instructions that came with your ClareVision IP

camera.

Notes

•The Clare Controls application supports three dockable cameras and one

pop-up view.

•Each camera supports six streams at once. For example, six mobile devices

can display the live camera stream at the same time, or five mobile devices

and one Internet connection.

•Do not set the camera for more than 8 FPS.

•If used on the same network as an NVR, the NVR must not be set more then

8 FPS.

Doc ID 2014-01-430 • Rev 01 3 / 6

Connecting the ClareVision IP cameras to the

ClareHome data network

After installing the ClareVision IP cameras, connect them to the ClareHome data

network.

To connect a ClareVision IP camera to the ClareHome data network:

1. Attach one end of a Cat 5E or Cat 6 networking cable to the camera and the

other end to your ClareHome network switch. See Figure 2.

2. Attach a computer to your ClareHome network, and then configure the

camera settings.

Figure 2: Connecting to the ClareHome data network

Configuring in Fusion

Once you have installed your ClareVision IP camera, you must add and

configure it in Fusion.

To add a ClareVision IP camera in Fusion:

1. Click the Devices tab, and then click the New Device button to display the

Select Template dialog.

Doc ID 2014-01-430 • Rev 01 4 / 6

2. Expand the CCTV > IP Cameras folder, and then select your series model

(P, M, or B) from the list.

3. In the Details tab’s Name field, enter a name for your ClareVision IP camera.

4. Click the Configuration tab.

Doc ID 2014-01-430 • Rev 01 5 / 6

5. Enter values in the following fields:

•In the Address field, enter the device’s network IP address.

•In the Driver field, select the Clare Controls ClareVision driver.

6. Click the Save button .

Fusion displays the Create Service dialog.

To create a service for the camera:

1. In the Create Service dialog’s Service Name field, enter a name for your

service. This is the name that appears on the customer’s mobile device – for

example, Front Door Camera.

2. Click Open Wizard to display the Service Instance dialog.

Doc ID 2014-01-430 • Rev 01 6 / 6

3. Click Camera Viewer Service, and then click Next.

4. Fusion displays the New Service Instance Devices tab and auto-populates

the control points.

5. Click Finished.

6. Be sure to deploy your project.

Contact information

Clare Controls, Inc.

7519 Pennsylvania Ave, Suite 104

Sarasota, FL 34243

Support: 941.404.1072

Fax: 941.870.9646

Email: [email protected]

www.clarecontrols.com

Altri manuali per ClareVision

Indice

Altri manuali Clare Controls Telecamera di sicurezza

Clare Controls

Clare Controls ClareVision Plus Manuale utente

Clare Controls

Clare Controls ClareVision Plus Series Manuale utente

Clare Controls

Clare Controls CV-M3D10-ODI Manuale utente

Clare Controls

Clare Controls CV-P5D10-ODHIM Manuale utente

Clare Controls

Clare Controls CV-B13D10-ODI Manuale utente

Clare Controls

Clare Controls IP Network Camera Manuale utente

Clare Controls

Clare Controls Mainline 2MP Manuale utente

Clare Controls

Clare Controls CV-P5D10-ODHIM Manuale utente

Clare Controls

Clare Controls CV-M3B10-ODI Manuale utente

Clare Controls

Clare Controls CVP-B2D50-ODI Manuale utente

Clare Controls

Clare Controls 1.3 MP Budget Mini Bullet Camera Manuale utente

Clare Controls

Clare Controls Mainline CV-M13B10-ODI Manuale utente

Clare Controls

Clare Controls ClareVision Plus Manuale utente

Clare Controls

Clare Controls ClareVision Plus Manuale utente

Clare Controls

Clare Controls CV-M13D10-ODI Manuale utente

Clare Controls

Clare Controls ClareVision Plus Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente