Clarke Air XP15 Manuale di istruzioni

OPERATION & MAINTENANCE

INSTRUCTIONS

LS1019 - ISS 2

ORIGINAL INSTRUCTIONS

150L ENGINE DRIVEN AIR COMPRESSOR

MODEL NO: XP15

PART NO: 2092500

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE compressor which is designed to supply

compressed air to air powered tools for a wide range of applications such as

spraying, sanding, drilling, and cutting.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safe operation

of the compressor.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

RESIDUAL RISK

Although this manual contains extensive safety warnings and information on

the safe operation of your compressor, every tool does have certain residual

risks which cannot be completely excluded with warnings or safety devices.

This compressor must therefore always be operated with caution.

NOISE LEVELS

This machine produces noise levels in excess of 70dB(A). Persons working in the

vicinity of the machine must be provided with suitable ear protection.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SPECIFICATIONS

NOTE: Specifications are correct at the time of going to print. In the

interests of safety or improvement in design, Clarke International

reserves the right to change specifications at any time.

Part Number 2092500

Engine Type Honda GP200H

Pump Type NH3AP

Air Receiver Size 150 l

Maximum Outpur Pressure 100 psi

Air Displacement CFM 15

Outlet Connections 1/2”

Dimensions (mm L X W X H 1330 x 420 x 850

Weight (kg) 88

WARNING: DO NOT ATTEMPT TO ALTER ENGINE SPEED SETTINGS, DOING

SO WILL INVALIDATE YOUR GUARANTEE

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

FOR YOUR SAFETY

GENERAL PRECAUTIONS

ALWAYS

• Ensure that all individuals using the compressor have read and fully

understand the Operating Instructions supplied and are suitably trained

• Stop the engine and ensure the pressure is expelled from the air receiver

before carrying out any maintenance.

• Ensure that there is adequate ventilation when spraying flammable

materials e.g. cellulose paint, and keep clear of any possible source of

ignition.

• Protect yourself. Think carefully about any potential hazards which may

be created by using the air compressor and use the appropriate

protection. e.g. Goggles will protect your eyes from flying particles. Face

masks will protect you against paint spray and/or fumes. Ear defenders

will prevent hearing damage caused by load noise.

• Consult paint manufacturers instructions for safety and usage, before

spraying

• Ensure that the air supply is turned off at the machine outlet and all

pressurised air from the machine and other equipment attached to it, is

expelled BEFORE disconnecting air hoses or other equipment.

• Make sure that children and animals are kept well away from the

compressor and any equipment attached to it.

• Ensure that any equipment or tool used in conjunction with your

compressor, has a safety working pressure exceeding that of the

machine.

DO NOT

• Direct a jet of air at people or animals, and NEVER discharge

compressed air against the skin. Compressed air CAN BE dangerous!

WARNING: AS WITH ALL MACHINERY, THERE ARE CERTAIN HAZARDS

INVOLVED WITH THEIR OPERATION AND USE. EXERCISING RESPECT AND

CAUTION WILL CONSIDERABLY LESSEN THE RISK OF PERSONAL INJURY.

HOWEVER, IF NORMAL SAFETY PRECAUTIONS ARE OVERLOOKED, OR

IGNORED, PERSONAL INJURY TO THE OPERATOR, OR DAMAGE TO

PROPERTY MAY RESULT. IT IS IN YOUR OWN INTEREST TO READ AND PAY

ATTENTION TO THE FOLLOWING RULES:

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

• Leave pressure in the receiver overnight, or when transporting.

• Adjust, or tamper with the safety valves. The maximum pressure is factory

set, and clearly marked on the machine.

• Operate in wet or damp conditions. Keep the machine dry at all times.

Similarly, a clean atmosphere will ensure efficient operation. Do not use

in dusty or otherwise dirty locations.

• Touch the machine until it has cooled down...some of the metal parts

can become quite hot during operation.

• Operate your compressor with any guards removed.

FIRE PREVENTION

ALWAYS

• Switch the engine OFF when refuelling.

• Refuel away from any source of heat.

• Refuel in a well ventilated area.

DO NOT

• Overfill the tank, fill to the level specified.

• Smoke whilst refuelling and avoid smoking or using a naked flame near

the compressor.

• Start the engine if there is spilled fuel. Any spillage must be wiped clean

and the compressor allowed to dry before attempting to start the

engine.

EXHAUST GAS PRECAUTIONS

ALWAYS

• Make sure that there is adequate ventilation when using the

compressor.

• Position the compressor so that the exhaust is pointed away from people

or animals.

DO NOT

• Use the compressor indoors or in an enclosed area. (i.e. in a warehouse,

tunnel, well, hold etc.)

WARNING: EXHAUST FUMES CAN BE FATAL

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

GENERAL NOTES

• NEVER allow anyone, not fully familiar with compressors, to use this

equipment.

• DO NOT alter the engine settings....these settings are set at the factory.

Should they need re-calibration - consult your Clarke dealer

OVERVIEW

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PREPARATION FOR USE

A. ENVIRONMENTAL

• Ensure the compressor is sited on a firm level surface.

• Ensure the environment is dry and dust free.

• Ensure there is adequate ventilation for: (a) Air intake to compressor

pump, (b) Cooling for compressor pump, (c) Engine exhaust gases.

B. ENGINE

Check oil and fuel levels and a visual check of components. Refer to engine

service manual.

C. PUMP

• Check oil level on the sightglass - to level marked.

D. FUELLING

Fill with unleaded petrol, according to the instructions within

the engine manual.

• Ensure the fuel tap is set to the required position.

• Ensure The fuel hose and connectors are intact, in perfectly serviceable

condition and there is no leakage.

NOTE: Always use a funnel to fill the fuel tank so as to avoid accidental

spillage of fuel. If fuel is spilled it must be removed from the unit

and surrounding area, before attempting to start the engine.

E. RECEIVER

• Drain off any condensate, by opening the drain cock (see Fig. 1).

Remember to close the drain cock when completed.

NOTE: This should be carried out DAILY when the compressor is in

constant use.

F. AIR HOSE & AIR TOOL

• Attach the air hose to the outlet using an appropriate connector.

• Attach the air tool/spray gun to the air hose...If using snap couplings, use

a whip end, available from your Clarke dealer.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

STARTING THE COMPRESSOR

1. At the beginning of the day, open the drain cock and allow any

condensate to drain completely, then close the drain cock.

2. To ease starting, ensure there is

no pressure in the pump outlet

manifold by opening the Bleed

valve.

3. Connect the air hose to the air

outlet.

4. Connect your air tool to the air

hose.

• Make sure that the air outlet

tap is closed

5. Start the engine in accordance with the instructions contained in the

engine service manual, If this is the first time you are using the compressor,

allow it to run for 10 minutes.

6. Close the bleed valve fully.

• Pressure will build up in the receiver and eventually the air governor will

operate so that the engine runs off load.

• The pressure registered on the pressure guage should be 100psi.

7. Use your air tool as prescribed in its user guide.

• When the pressure has dropped by approximatley 20psi the compressor

will start up again.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

STOPPING THE COMPRESSOR

1. At the end of the day, stop the compressor in accordance with the

instructions in the engine manual,

2. Operate the air tool trigger or operating lever etc., to ensure there is no

pressure in the air line, then disconnect airline and tool.

3. Finally, close the drain cock very slowly to release pressure in the tank..

4. Take care not to touch the engine or pump as they remain hot for some

time after use.

WARNING: DO NOT UNDER ANY CIRCUMSTANCES ATTEMPT TO REMOVE

THE AIR TOOL OR DISCONNECT THE AIR HOSE UNTIL YOU ARE SATISFIED

THAT THE PRESSURE HAS BEEN RELIEVED.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

MAINTENANCE

DAILY

1. Drain Air Receiver of any condensate

2. Check engine oil level and top up where necessary. Ensure the dipstick

breather hole is not blocked.

3. Check pump oil level

WEEKLY

1. Clean Pump Air Filter

• Unbolt the Pump Air Filter cover and pull away to reveal foam element.

If badly contaminated, replace. Remove any loose contaminants if any

then replace.

2. Clean the engine cooling fins.

6 MONTHLY

1. Renew pump lubricating oil.

2. Drain pump by removing the

drain screw.

3. Replace screw and top up the oil

to the level on the sightglass. Use

SAE40 oil available from your

Clarke dealer as follows:

• Compressor oil - 1 litre: Part No.

3050810

• Compressor oil - 5 litre: Part No.

3050802

In addition to the above, check the

engine manual for service schedule.

Repairs should only be carried out by a qualified engineer. If problems occur,

contact your Clarke dealer.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Clarke compressore d'aria

Clarke

Clarke HUNTER 30 Manuale di istruzioni

Clarke

Clarke BANDIT Manuale di istruzioni

Clarke

Clarke Air RANGER 7-550 Manuale di istruzioni

Clarke

Clarke XPPV11/50 Manuale di istruzioni

Clarke

Clarke 2241000 Manuale di istruzioni

Clarke

Clarke BOXER II 14/150 Manuale di istruzioni

Clarke

Clarke RANGER 64 Manuale di istruzioni

Clarke

Clarke SE15 Manuale di istruzioni

Clarke

Clarke SHHHAIR MAX 50/150 Manuale di istruzioni

Clarke

Clarke BRONCO 2 OIL FREE Guida alla risoluzione dei problemi

Clarke

Clarke BOXER II 14/50P Manuale di istruzioni

Clarke

Clarke PIONEER 210 OF Manuale di istruzioni

Clarke

Clarke Raider 15/500 Manuale di istruzioni

Clarke

Clarke Pioneer 205 Manuale di installazione e funzionamento

Clarke

Clarke RANGER 6/500 Manuale di istruzioni

Clarke

Clarke Ranger 25A Manuale operativo

Clarke

Clarke XE Series Manuale di istruzioni

Clarke

Clarke Boxer 14/200 Manuale di istruzioni

Clarke

Clarke Hunter 25 Manuale di istruzioni

Clarke

Clarke BOXER II 14/200 Manuale di istruzioni

Clarke

Clarke SHHHAIR 30 Manuale di istruzioni

Clarke

Clarke RACER 9/50P Manuale di istruzioni

Clarke

Clarke RANGER 8/50 Manuale di istruzioni

Clarke

Clarke CFP11F Manuale di installazione e funzionamento

Manuali compressore d'aria popolari di altre marche

Sparmax

Sparmax DC-25XR Manuale utente

KAESER

KAESER M122 Manuale utente

GMC

GMC GAC1500 Manuale utente

Briggs & Stratton

Briggs & Stratton Air Compressor Manuale utente

Fini

Fini F3GST2TK Manuale utente

Industrial Air

Industrial Air CP1580325 Manuale di programmazione

Campbell Hausfeld

Campbell Hausfeld RP3300 Guida rapida

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Manuale utente

Hitachi

Hitachi EC99S Manuale dell'operatore

Parkside

Parkside PKO 270 A1 Manuale utente

Sullair

Sullair 185 Manuale utente

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Manuale utente

Ferm

Ferm CRM1046 Manuale utente

BE AC153 Manuale utente

RIDGID

RIDGID OF25150A Manuale utente

Johnson Controls

Johnson Controls QUANTUM LX Manuale

Sears

Sears Craftsman 919.167463 Manuale utente

Ring Automotive

Ring Automotive RAC700 Manuale utente