Clarke CVPW Guida rapida

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

MODEL NO: CVPW

PART NO:

PART NO: 6499644

Weak Chemical Vane Pump

INTRODUCTION

Thank you for purchasing this CLARKE vane pump,

Suitable for use with weak corrosive chemicals such as weak acid, alkali and water based chemicals

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully.

SAFETY

To ensure safe and efficient operation, it is essential to read and follow each of these warnings and precautions.

1. When used to pump flammable liquids, improper use or installation of this product can cause serious bodily injury or

death.

2. Do NOT smoke near the pump or use the pump near an open flame. Fire could result.

3. When pumping flammable liquids, all equipment must be grounded to prevent the build up of static electricity

which may ignite vapours or gases.

SPECIFICATIONS

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of

purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not

used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior

permission.

This guarantee does not effect your statutory rights.

WARNING: THIS PRODUCT IS NOT SUITABLE FOR USE WITH FLUIDS FOR HUMAN CONSUMPTION OR AQUEOUS FLUIDS.

THIS PRODUCT SHOULD NOT BE USED FOR FLUID TRANSFER INTO AIRCRAFT.

Barrel Adaptor Size 2" BSP Outlet Tube Diameter 19 mm

Max Flow 0.35l per rotation Dims (WxDxH) 215 x 270 x 1325 mm

Inlet Tube Diameter 27 mm Product Weight 1.9 kg

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

FITTING THE PUMP TO A BARREL

1. Assemble the pump using the required number of inlet tubes. Use the PTFE tape at all connections

• The tube which contains the black fiter + mesh should be at the bottom.

2. Screw the collar into the threaded opening of the barrel.

3. Raise or lower the inlet tube so that it is just off of the bottom of the barrel when fitted.

USING THE PUMP

1. Make sure all connections are secure and place a suitable container under the spout.

2. Rotate the handle to draw fluid from the barrel.

• The first time you use the pump, liquid should begin flowing after several turns of the handle

MAINTENANCE

CLEANING THE INLET FILTER

1. Unscrew the inlet filter from the bottom of the inlet tube and clear away any debris it has trapped.

2. Replace the filter.

WHAT IS SUPPLIED ASSEMBLED

CAUTION: DO NOT USE THE PUMP WITHOUT THE FILTER IN PLACE.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CHEMICAL RESISTANCE TABLE

• Room Temperature

•%SayMassConcentration

WATER ACIDS ALKALI PETROLEUM

BASED

HALOGENS ALCOHOL THINNER

Sea Water Acetic Acid

20%

Potassium

Hydroxide

25%

Silicone Oil Calcium

Chloride 10%

Ethanol 96% Acetone

Boric Acid

10%

Sodium

Hydroxide

solution 50%

Copper

Sulphate

Glycerine

Citric Acid

10%

Potassium

Dichromate

10%

Isopropanol

Hydraulic

Acid 35%

Soap Solution Methanol

Lactic Acid

80%

Sodium

Chloride 10%

Propanol

Nitric Acid

10%

Sodium

Nitrate 10%

Oxalic Acid

50%

Sodium

Thiosulphate

Phosphoric

Acid 50%

Zinc Chloride

10%

Sulphuric

Acid 70%

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

Questo manuale è adatto per i seguenti modelli

Altri manuali Clarke Pompa dell'acqua

Clarke

Clarke HSEC651A Manuale di istruzioni

Clarke

Clarke psp125b Manuale di istruzioni

Clarke

Clarke DWP300A Manuale di istruzioni

Clarke

Clarke HIPPO 2 Manuale di istruzioni

Clarke

Clarke CM1 Manuale di installazione e funzionamento

Clarke

Clarke DWP100A Manuale di istruzioni

Clarke

Clarke FP150 Manuale utente

Clarke

Clarke PSV3A Manuale di istruzioni

Clarke

Clarke CPE15S Manuale di istruzioni

Clarke

Clarke CS85S Manuale di installazione e funzionamento

Clarke

Clarke CEB103 Manuale di istruzioni

Clarke

Clarke CGP870 Manuale di istruzioni

Clarke

Clarke CBM240E Manuale di istruzioni

Clarke

Clarke DFT12 Manuale di istruzioni

Clarke

Clarke BPT600 Manuale di installazione e funzionamento

Clarke

Clarke MSP12 Manuale utente

Clarke

Clarke CBM250SS Manuale di istruzioni

Clarke

Clarke CD1 - 1 Manuale di installazione e funzionamento

Clarke

Clarke CPCDP500 Manuale di istruzioni

Clarke

Clarke CDDFTP Manuale utente

Clarke

Clarke HIPPO-3 Manuale

Clarke

Clarke CBT1300SS Manuale di istruzioni

Clarke

Clarke BIP1000 Manuale di istruzioni

Clarke

Clarke CRWP1 Manuale utente

Manuali Pompa dell'acqua popolari di altre marche

Neptun

Neptun NPHW 5500 Manuale utente

Sensidyne

Sensidyne Gilian BDX-II Istruzioni per l'installazione e il funzionamento

Draper

Draper 47808 Manuale utente

Trolla

Trolla 12820 Manuale utente

Sunfab

Sunfab SVH Series Manuale utente

WilTec

WilTec 50740 Manuale utente

Fieldmann

Fieldmann FVC 5015 EK Manuale utente

Everbilt

Everbilt EFSUB5-122HD Manuale utente

Graco

Graco Husky 3300e Manuale utente

esotec

esotec 101018 Manuale utente

moyno

moyno 2000 CC Manuale utente

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuale utente

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guida alla risoluzione dei problemi

DUROMAX

DUROMAX XP WX Series Manuale utente

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuale utente

Franklin Electric

Franklin Electric IPS Manuale utente

Xylem

Xylem e-1532 Series Manuale utente

Milton Roy

Milton Roy PRIMEROYAL Manuale utente