Clas Ohlson RC8020 Manuale utente
ENGLISH
IP Camera
Article number 36-3379 Model RC8020
18-2115 RC8020-UK
2
3
ENGLISH
3
Wireless IP Camera
Article number 36-3379 Model RC8020
18-2115 RC8020-UK
Please read the entire instruction manual before using the product and save it for
future reference. We apologise for any text or photographic errors and any chang-
es of technical data. If you have any questions concerning technical problems
please contact our Customer Service Department (see address on reverse.)
Table of Contents
1. Safety 3
2. Product Description 4
3. Features 5
4. Mounting and installation 6
5. Ground conguration 7
6. Show the camera image via the web browser 11
7. Conguration via the web browser 12
8. Advanced use 27
9. Monitor Manager 30
10. Care and Maintenance 40
11. Troubleshooting 40
12. Disposal 40
13. Specications 40
1. Safety
• The camera is for indoor use only.
• Use only the supplied or recommended power adaptor (5 V DC).
• Never expose the camera to moisture or humidity.
• Always disconnect the camera from the electricity network before cleaning.
• Never dismantle the camera. Certain parts inside the casing carry dangerous
currents. Touching these can give you an electric shock.
ENGLISH
2. Product Description
2.1 Features
CMOS Picture sensor.
The MPEG 4 technology offers high video quality but reduced band width
directly to pc.
Built-in microphone and connector for speakers for two-way communication
between computer and camera.
Software program for conguration, monitoring, and recording.
Conguration via installation guide.
Alarm and recording at detecting of movements.
Scheduled recording.
•
•
•
•
•
•
•
Internet functions
• Denable http-port – Allows the user to pick port for access via the Internet.
• Support for DDNS (Dynamic DNS) – Function for updates against Dynamic
DNS-server.
• NTP (Network Time Protocol) – Synchronization of the clock against an
Internet time server.
Safety Features
• User verication – The camera can be password protected for up to 20 users.
Up to 5 users can be connected at the same time.
• Password protected conguration – Prevents unauthorized to change the
camera’s properties.
5
ENGLISH
2.2 System requirements
• Network connection PC with Windows 2000 or XP
• Microsoft Internet Explorer 6.0 or later
• Router
2.3 The package contains
1. Network camera with aerial
2. Power adaptor (5 V DC)
3. Installation disc
4. Instruction manual
3. Features
3.1 Front of camera
Camera lens The camera lens can not be adjusted. However make
sure that it is clean from dirt and dust to obtain the best
image.
Microphone The built-in microphone is place in the front of the camera.
POWER (green) LEDs light up with steady shine when the camera is
turned on.
When the camera starts the LEDs blink for 15-20 seconds.
ACTIVE (green) When the LEDs blink, the camera image is transferred in
real time to one or several users.
NETWORK (green) LEDs light up with steady shine when the camera is
connected to a network.
The LEDs blink when the data is transferred to the network.
3.2 Back of camera
POWER Connector for the included power adaptor (5 V DC, plus
on the centre pin).
SPKR Out 3.5 mm connector for connecting speakers.
LAN Connect a standard network cable to connect the camera
to your network switch or router.
RESET Use a narrow object and push it in and hold for
10 seconds to reset the camera to factory settings.
6
ENGLISH
. Mounting & Installation
1. Mounting the aerial
Attach the supplied aerial to the bracket on top of the camera. The aerial can
be angled for the best possible reception. The best reception is obtained with
the aerial angled vertically.
2. Mounting the camera
Mount the camera on the included table stand. The table stand can also be
ceiling or wall mounted.
3. Connecting the network cable
Connect a standard network cable to the “LAN” connection to connect the
camera to your network switch or router.
4. Starting the camera
Connect the supplied power adaptor to the input marked POWER. The camera
automatically starts up. Use only the included or recommended adaptor.
5. LED-Indicators
• POWER - At start-up the indicator is lit for a short while before it changes
to a ashing light for 15-20 seconds. Then the indicator shines steadily.
• ACTIVE - Lights only when the camera image is transferred in real time
to one or several users.
• NETWORK - Lights when the camera is connected to the network.
7
ENGLISH
If there is more than one
camera connected to the
network, you must rst
select thye camera from
the list and then click on ►.
5. Ground conguration
5.1 Congure the camera with the conguration guide
To be able to use the camera it has to be congured rst.
The installation instructions apply to Windows XP with Service pack 2 installed.
1. Connect the camera according to the instructions in chapter 4.
2. Insert the supplied CD into the computer’s CD-ROM drive. If the installation
does not start automatically, use the le NetworkCamera.exe application
found directly under the root folder on the CD-ROM.
3. When the installation program
has started a welcome image
is displayed. Click on Setup
Camera to start the installation.
4. The installation program searches for the camera on the network and then
displays the camera in the list to the left.
8
ENGLISH
• In the next dialogue you enter the user name and password for the camera.
Then click OK.
The default user name and password are:
User name: Administrator
Password: (no password)
5. In the following dialogue box you set time zone and date. You can also indicate
a name and description for the camera. Make your settings and then click ►.
9
ENGLISH
6. Select if the camera is to use a xed IP address (Fixed IP address) or to
automatically obtain an IP address (Dynamic IP address) from e.g. a router
with DHCP function. Select your choice and click next ►.
7. If you have chosen to give the camera a xed IP address in the earlier step
TCP/IP Settings appears in the dialogue box.
• Enter a vacant IP address, Subnet Mask and Default Gateway for
your network.
• Fill in Primary DNS and if Secondary DNS you wish to use the email and
DNS functions. See information from your broadband supplier.
• Click ► next to continue.
N.B: Note the IP address; you need it later to congure the camera.
10
ENGLISH
8. The following dialogue box shows the settings you have just entered. Click on ►.
9. Click on OK to save and then OK again.
10. Click on Exit to complete the installation.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Clas Ohlson Telecamera IP
