JumboDrive – User's Manual
non-skid and wit out possible collision of t e rotating objects wit t e
device itself or in interaction wit ot er objects, e.g. camera, cables or
lamps.
In general, only t e installation of items, not of persons, on t e rotary
platform, is designated. T e manufacturer does not t ake over any liabil -
ity for t e ride of persons . Instead, t e user as to care for t e stand and
fall protection in suc cases, as suc actions are not designated at t e
device. It is pointed out, t at during t e operation, rotational accelera-
tions and decelerations occur t at can be followed by eavy falls of rid-
ing persons suc as t e rotary motion itself. Likewise, t e on and off of
persons onto t e rotary platform or down from it as to be secured wit
appropriate aids or by assistants, as t e platform can easily be rotated
in operational breaks and t erefore, can turn away w en entering or
leaving.
During operating, strong torques between t e rotary platform and t e
table box are produced. It as to be ensured t at neit er persons nor
items stuck between t e rotary platform and t e table box.
As power supply and data cables, only t e original cables offered by
t e manufacturer ave to be used. T e usage of ot er cables can be fol-
lowed by serious damage at t e device, for w ic t e manufacturer
does not take over any warranty. Furt ermore, t e original cable is not
permitted to use for ot er purposes.
If t e device is opened, e.g. by dismounting t e rotary platform, t e
supply voltage as to be disconnected before and until re-closing by
unplugging t e power cord.
For damages, also secondary damages, w ic are caused by non-ob-
servance of t ese tips at t e Turntable, ot er objects or persons, t e
manufacturer does not take over any liability.
4
