Claxan CL-KVM-5002 Manuale utente
Table of Content
■Introduction
Overview……………...………………………………..1
Features………………….…………………………….2
■Installations
Console Connection……………….………………....3
Computers Connection……………….……….……...8
Initial Power-up……………….………………..……..12
■Operations
Front Panel operation…………...……………..…….13
Hot-key commands…...…………...……………..…..13
Audio Function..……………………………………….16
■Appendices
Specifications………………..………………………..17
■Troubleshooting…………………...……………19
Please read this manual thoroughly and
follow the Installation procedures to prevent any
damage to the Claxan Switch or any connecting
device.
1
-----------------
Introduction
Overview
The Claxan Switch CL-KVM-5002, CL-KVM-5004,
CL-KVM-5002A, CL-KVM-5004A, CL-KVM-UMH-2,
CL-KVM-UMH-4, CL-KVM-UMH-2A, and CL-KVM-UMH-4A
are computer switches that allow access to two or four IBM
compatible computers respectively from one PS/2 (or USB)
keyboard, mouse and monitor. Switching between
computers is as easy as pressing the push button or entering
hot-key commands from your keyboard. There is no interface
card and software to install and the Claxan Switch is
independent of the computer operating system.
Ready to run right out of the box, this Kit comes with
everything you need - a switch and complete cable sets, just
hook them up andgo. By allowing one console to manage all
your computers, the Claxan Switch eliminates the expense
for extra consoles, the spaces for extra peripherals and the
time hopping around for accessing different computers.
The audio function equipped CL-KVM-5002A /
CL-KVM-UMH-2A allow one microphone and speaker to be
shared by two computers and the CL-KVM-5004A /
CL-KVM-UMH-4A allow four.
2
Features
Unique loose-free cables included preventing keyboard
or mouse connector from getting loose.
Supports PS/2 (or USB) keyboard and mouse.
Keyboard and mouse emulation for error-free PC boot
up.
Keyboard and mouse are hot pluggable at any time
without turning either Claxan Switch or PCs off.
Space-saving design - all cables are connected to the
rear.
Auto scan automatically selects computers sequentially.
Supports most of mice such as M/S IntelliMouse (Pro),
Explorer, Optical,etc.
Hot-key and push button allow easy computer access.
Keyboard states automatically saved and restored when
switching computers.
Operating system independent, transparent to all
applications.
High VGA resolution 1920x1440.
DDC2B compatible.
Power-free operation - the Claxan Switch draws power
from the attached PCs.
Supports the audio (SPEAKER+MIC) function (For
CL-KVM-5002A, CL-KVM-5004A, CL-KVM-UMH-2A
and CL-KVM-UMH-4A only)
3
-----------------
Installation
Console Connection
CL-KVM-5002 / CL-KVM-5004 / CL-KVM-5002A
CL-KVM-5004A
Turn your computers off. Connect a PS/2 keyboard to the
mini-DIN-6 portmarked with “Keyboard” and a PS/2 mouseto
the mini-DIN-6 portmarked with “Mouse”. Then connect your
VGA monitor cable directly to the HDB15 port as shown in
Figure 1 for CL-KVM-5002 and Figure 2 for CL-KVM-5004.
For the models with audio function, CL-KVM-5002A and
CL-KVM-5004A, connect a pair of Speakers and a MIC as
well.
Figure 1: CL-KVM-5002 Console Connection
Figure 2: CL-KVM- 5004 Console Connection
4
The Figure 3 and 4 shows the console connection for
CL- KVM-5002A and CL-KVM-5004A respectively.
Figure 3: CL-KVM-5002A Console Connection
Figure 4: CL-KVM-5004A Console Connection
5
CL-KVM-UMH-2 / CL-KVM-UMH-4 / CL-KVM-UMH-2A
CL-KVM-UMH-4A
Turn your computers off. Connect a USB keyboard to the
USB port marked with “Keyboard” and a USB mouse to USB
port marked with “Mouse”. Then connect your VGA monitor
cable directly to the HDB15 port as shown in Figure 5 for
CL-KVM-UMH-2 and Figure 6 for CL-KVM-UMH-4. For the
models with audio function, CL-KVM-UMH-2A and
CL-KVM-UMH-4A, connect a pair of Speakers and a MIC as
well.
Figure 5: CL-KVM-UMH-2 Console Connection
Figure 6: CL-KVM-UMH-4 Console Connection
6
The Figure 7 and 8 shows the console connection for
CL- KVM-UMH-2A and CL-KVM-UMH-4A respectively.
Figure 7: CL-KVM-UMH-2A Console Connection
Figure 8: CL-KVM-UMH-4A Console Connection
7
The multi-sync monitor must be capable of synchronizing
with the computer's video signal. If you are uncertain about
the monitor type, please consult the monitor user's manual.
The Claxan Switch consumes negligible power and is
designed to run reliably without an external power adapter.
8
Computers Connection
CL-KVM-5002 / CL-KVM-5004 / CL-KVM-5002A
CL-KVM-5004A
Claxan Switch comes with complete cable sets facilitating
computer connection. One side of the cable has an HDB15
connector and the other side has three connectors (one
HDB15 and two mini-DIN6s). The PC 1 ~ PC 2 marks on the
Claxan Switch are for computer connection. For the models
with audio function, CL-KVM-5002A and CL-KVM-5004A,
connect to Speaker port and MIC port as well.
Figure 9: CL-KVM-5002 COMPUTER Connection
Figure 10: CL-KVM-5002A COMPUTER Connection
9
The PC 1 ~ PC 4 marks on the Claxan Switch are for
computer connection as shown in Figure 11 and 12.
Figure 11: CL-KVM-5004 COMPUTER Connection
Figure 12: CL-KVM-5004A COMPUTER Connection
NOTE: If your computer uses an AT style keyboard, you will
need an "AT-to-PS/2 keyboard adapter" at the computer
keyboard port.
Questo manuale è adatto per i seguenti modelli
7
Indice
Altri manuali Claxan Interruttore
