OSC (oscillating function)
There are three different directions,
45/90 degree and universal, the
louvers will move or fixed as select
positions
ION (ionization function)
To select 'ION', press the 'ION' key
and the light will come on. An ion
can refresh the air, it's so called air
vitamin.
Carbon filter (deodor function)
Take out the carbon filter from the bag and insert it on
the filter. See picture above.
- Clean the filter 1x every 2 weeks with a vacuum
cleaner
- Replace the filter 1x every 3 months
Order?
https://www.cleanairoptima.com/accessoires/mg/44
(contact the customer service)
UV (Sterilization function)
.To select 'UV' press the 'UV' key and
the light will come on.
Humidity setting
Press UP / DOWN key to select the desired relative
humidity level, default relative humidity is 55%. Relative
humidity 35% is selected, the compressor will not stop
until water tank full.
UV (Sterilization function): To select 'UV' press the 'UV'
key and the light will come on.
FAN (Ventilation key): press 'MODE' key to select 'FAN'
and 'FAN' indicator light comes on.
Defrost
The appliance will defrost automatically as programmed
once the coil sensor detects temperature below some
figure, and the defrosting indicator will light up at the
same time. Once defrosting finishes, the appliance will
recover the previous running mode.
Tank-full
If the water tank is full, the indicator light comes
on and flashes
Timer (timer function)
Press timer to program time and 'TIMER' light comes on while
timer is programmed. Before programming make sure that the
timer function has not been activated (the light must be off)! The
following timer programs are available:
a) Delayed power-on function (the appliance is in stand-
by status) Use key 'UP' and 'DOWN' to set the time
period (0-24 hours). The appliance will start once
time reaches setting value.
b) Delayed power-off function (the appliance is in
working status). The appliance will stop once time
setting value.
6
