Clear-Com FreeSpeak II Manuale utente

Page 1399G106 Rev C 08/07/15

A FreeSpeak II (FS II) system consists of five main elements:

•Wireless beltpacks (FSII-BP-19, FSII-BP-24).

•The Base station (FSII-BASE) that routes communication to and from the beltpacks and

other audio devices.

•Antennas (FSII-TCVR-19, FSII-TCVR-24) that provide coverage zones in which the

beltpacks operate.

•Optional antenna splitters (PD2203) that run up to 5 separate antennas.

•Suitable headsets such as the Clear-Com CC-300-X4.

Connecting the transceiver/antennas to the Base station

To connect the antennas to the Base station:

1) Clear-Com recommends using 4-pair shielded screened cable (CAT-5/5e/6) with RJ45

connectors to connect the antennas to the Base station. Up to 5 antennas can be

connected to each transceiver port using an antenna splitter, or two antennas can be

connected directly to the Base station. The Base station can power cable lengths of up to

650 ft (200m). Powering antennas or splitters individually can increase cable lengths to a

maximum of 3280 ft (1000m). See 3.2.1 Wiring the antennas and splitters in the

User Guide for more information.

2) When the transceiver/antennas are connected, turn on the Base station and wait for it to

boot.

Using the Beltpacks

The system arrives with a default audio set-up and configuration so the system can simply be

wired and powered for basic use. The default set-up has two Wireless Partylines, WPL01 and

WPL02 for beltpack channel A and B respectively. Each channel talks to:

•All the beltpacks on that channel

•The head set on the Base station.

To customize an audio channel configuration please refer to the FreeSpeak II User Guide.

IEC power

connector Transceiver/antenna ports

Wired partyline

connectors

Quick

Start

Guide

FreeSpeak II™ Stand alone

Base station system

Quick Start Guide |FreeSpeak II™ stand alone system

Page 2399G106 Rev C 08/07/15

Enabling registration of beltpacks to the Base station

1) From the Base station menu, go to MAIN MENU ->SYSTEM ->REG ->START. Enable

registration mode has a two minute inactive time-out.

2) On the beltpack to be registered, hold down the menu key for 2 seconds, then enter

SYSTEM CONNECT using the rotary controllers and the C& Dkeys.

3) Select the system to pair to. The system will be visible (V) and in pairing mode (P).

4) Enter the four digit pairing code for the system using the rotary controllers and the menu

select key (D). The default is 0000.

5) Select an available role from the list displayed on the beltpack.

The beltpack is now paired and ready for operation. To test, press and hold the channel A button

while talking. Others will hear you on channel A.

Battery

Compartment

Rotary control, audio

levels Channel A (also

menu navigation in

menu mode)

On/Off button (3 second

press and hold)

Rotary control,

audio levels

Channel B (also

menu navigation in

menu mode)

Channel A

Talk button

Channel A Call button

(also cancels menu selection

when in menu mode)

Beltpack information

screen (also displays

menu options when in

menu mode

Channel B

Talk button

Channel B Call button

(also menu select when in menu mode)

Menu button (2 second

press and hold)Reply button

Menu display screen Menu control. Push to access menu or select

menu item. Turn to scroll through menu items.

Altri manuali per FreeSpeak II

Indice

Altri manuali Clear-Com Sistema di interfono

Clear-Com

Clear-Com KB-702 Manuale utente

Clear-Com

Clear-Com EclipseHX Manuale utente

Clear-Com

Clear-Com Eclipse HX-Median Manuale utente

Clear-Com

Clear-Com MS-200C Guida alla risoluzione dei problemi

Clear-Com

Clear-Com Tempest 900 Manuale utente

Clear-Com

Clear-Com RM-702-IM Manuale utente

Clear-Com

Clear-Com RS-700 Series Manuale utente

Clear-Com

Clear-Com LQ series Manuale utente

Clear-Com

Clear-Com ENCORE MS-702 Manuale utente

Clear-Com

Clear-Com HelixNet Partyline Manuale utente

Clear-Com

Clear-Com HelixNet 2.1 Manuale utente

Clear-Com

Clear-Com MS-222 Manuale utente

Clear-Com

Clear-Com Encore Manuale utente

Clear-Com

Clear-Com RS-602 Manuale utente

Clear-Com

Clear-Com CS-100 Guida alla risoluzione dei problemi

Clear-Com

Clear-Com ECLIPSE MATRIX Manuale utente

Clear-Com

Clear-Com Eclipse HX-PiCo Manuale utente

Clear-Com

Clear-Com RM-220 Guida alla risoluzione dei problemi

Clear-Com

Clear-Com SB-440 Manuale utente

Clear-Com

Clear-Com TEMPEST 2400 Manuale utente

Clear-Com

Clear-Com SB-704 Manuale utente

Clear-Com

Clear-Com HME DX410 Manuale utente

Clear-Com

Clear-Com Matrix Plus 3 Manuale utente

Clear-Com

Clear-Com ICS-2003 Manuale utente

Manuali Sistema di interfono popolari di altre marche

Bticino

Bticino LINEA 3000 Manuale utente

MSI

MSI MSI-140 Manuale utente

golmar

golmar Stadio Plus Manuale utente

CyberData

CyberData 011211 series Manuale

Vidos

Vidos duo M1021 Manuale utente

Vimar

Vimar ELVOX 7539/E Manuale utente

SSS Siedle

SSS Siedle BTSV 850-03 Manuale utente

Dahua

Dahua VTO Series Manuale utente

Elvox

Elvox 5651 Manuale utente

Videx

Videx VIDEOKIT Series Manuale utente

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuale utente

Viking

Viking E-35-EWP Manuale utente

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuale utente

SSS Siedle

SSS Siedle BFCV 850 Series Manuale utente

GRD

GRD MAX V2 Manuale utente

Alecto

Alecto ADI-250 Manuale utente

Aiphone

Aiphone IE-8MD Manuale utente

Perel

Perel EDB4 Manuale utente