Clearaudio Tracer Manuale utente

User manual

Bedienungsanleitung

electronic GmbH, 2018/10 Made in Germany

Tracer

User manual / Bedienungsanleitung

2 © clearaudio electronic GmbH, 2018/10

User manual........................................................3 - 11

Bedienungsanleitung ..........................................12 - 21

Dear Clearaudio customer,

Thank you for your decision to purchase the

Tracer

tonearm from Clearaudio.

This tonearm is manufactured to the highest degree of tolerance and quality.

Drawing on engineering tricks from the nest watchmakers, it features a high-precision, low friction

jeweled bearing, judiciously crafted from tungsten and sapphire. The carbon tonearm tube is both

extremely rigid and very lightweight, giving a perfect combination of stability and agility.

The anti-skating force is eortlessly adjustable by way of a simple dial within perfect reach, while

the aluminium headshell allows the azimuth to be easily ne-tuned.

The counter-weight is underslung providing an optimal centre of gravity and allowing straight forward

adjustment of the tracking force.

Please take a moment to read this owner’s manual to ensure correct set-up, to avoid any possible

damage and to learn how to take good care of your Clearaudio

Tracer

tonearm to ensure that it

will give many years of musical enjoyment and pleasure.

Your Clearaudio team

Clearaudio electronic GmbH

Warning

Do not expose the equipment to rain or moisture.

Do not handle the mains lead with wet hands.

No naked ame sources, such as lighted candles, should be placed on the equipment.

Only for use on turntables.

CE-MARKING

User manual / Bedienungsanleitung

Made in Germany 3

Contents

1. List of components................................................ 4

Tracer

tonearm mounting..................................... 5 - 9

3. Special notes......................................................... 10

4. Technical data....................................................... 11

Warranty................................................................... 22 - 23

User manual / Bedienungsanleitung

4 © clearaudio electronic GmbH, 2018/10

1. List of components

Clearaudio has developed special and secure packing for your

Tracer

tonearm that ensures safe

transportation.

Please keep this original packing, you will need it if you need to ship the tonearm.

Please check the contents as shown in picture below and in the list at the bottom of this page:

Tracer

tonearm

with Sixstream Super Wire cable

incl. counterweight

5. Screws:

- 3 pcs. hex screw M4 x 10

- 1 pcs. grub screw M6 x 8

2. Clearaudio tonearm base 6. Paper tonearm alignment template

(not shown)

3. 1 pcs. additional counter weight 37g

2 pcs. at head screw (3 x 8mm) 7. User manual, quality certicate,

warranty card and return delivery note

(not shown)

4. 3x hex wrench:

- 3mm

- 2.5mm

- 1.5mm

Screwdriver (not shown)

Pic. 1: List of components

345

User manual / Bedienungsanleitung

Made in Germany 5

Tracer

tonearm mounting

To mount the tonearm base on your armboard, please use the hex screws provided (M4 x 10) as

shown in Pic.1 No. 5 (page 4).

Pic. 2: Mount tonearm base

Mounting the aluminum clamping ring on a non-Clearaudio turntable:

To install the aluminum clamping ring on the turntable chassis, you will need to drill the required

holes. Please refer to the drilling template shown below (Picture 3) for the measurements to mark

the exact drilling holes.

Please be informed, that this drawing is not suitable for use as a mounting tool.

Use a 3.3 mm HSS drill bit, then cut an M4 thread into each hole using an appropriate tap cutting

tool.

If the turntable chassis material is not suitable for cutting threads, please use a 4.5 mm HSS drill bit

to drill the holes through the material. In this case use standard bolts and nuts to x the arm base.

User manual / Bedienungsanleitung

6 © clearaudio electronic GmbH, 2018/10

Carefully thread the cables and the tonearm through the armboard, taking care not to damage any

wires. Now secure the tonearm using the two VTA lock screws on the right and the left side, but not

too tight so that you can adjust the VTA in the next step.

Pic. 4: Threading the tonearm through the armboard

Pic. 3: Mounting the aluminum clamping ring on a non-Clearaudio turntable

User manual / Bedienungsanleitung

Made in Germany 7

Ensure that the distance from the spindle to the pivot point of the tonearm is exactly 222 mm.

Moving the armboard in one direction or another will allow you to locate the correct position.

You can also use optional the Clearaudio

cartridge alignment gauge

(Art. No.: AC005/IEC www.analogshop.de ).

Pic. 5: Distance from pivot to spindle

222 mm

You can now mount the cartridge.

VTA adjustments are accomplished by loosening the two VTA lcok screws on the side of the armboard

base (shown in picture 5 below). Once loose, you can move the arm up or down to achieve the

desired VTA. Always ensure that you adjust the VTA such that the tonearm tube is parallel to the

turntable chassis. Tighten the screw when nished.

Pic. 6: VTA adjustment

User manual / Bedienungsanleitung

8 © clearaudio electronic GmbH, 2018/10

Azimuth adjustments are made by loosening the small (1.5 mm) hex bolt (red marked screw) on the

bottom side of the armtube where the headshell enters the armtube. Once you loosen this screw,

you´ll be able to rotate the headshell a small amount in either direction. Be sure to tighten the screw

when done.

Pic. 7: Azimuth adjustment

You can adjust the tracking force of your cartridge by turning the adjustment screw

(shown in the picture below)

Green arrow = more tracking force (counter clockwise)/

Red arrow = less tracking force (clockwise)

Pic. 8: Screw to adjust the headshell

Pic. 9: Tracking force adjustment

User manual / Bedienungsanleitung

Made in Germany 9

Now you are ready to adjust the antiskating force. The level of antiskating force required will depend

on the tracking force of the cartridge.

Level of antiskating Tracking force Position of the antiskating control

minimal antiskating >> 10 – 15mN >> see illustration 1

medium antiskating >> 15 – 20mN >> see illustration 2

maximum antiskating >> 20mN and more >> see illustration 3

Illustration 1 Illustration 2 Illustration 3

(minimal antiskating) (medium antiskating) (maximum antiskating)

Pic. 10: Position of the antiskating control

The general setup is now complete.

Now you can connect your

Tracer

tonearm with the phono input of your phono-preamplier.

For more information on compatible phono-preampliers, see our website www.clearaudio.de.

Now you are ready to play your vinyl records.

Clearaudio wishes you mcuh enjoyment with your new

Tracer

tonearm.

User manual / Bedienungsanleitung

10 © clearaudio electronic GmbH, 2018/10

3. Special notes

3.1 Maintenance

If you don`t use your

Tracer

tonearm for while (eg. two weeks or more), you are advised to raise

and lower the arm‘s cueing lever/arm lifter a few times over that time period to avoid it sticking in

the raised position.

3.2 Transportation

Should further transportation of the

Tracer

tonearm be necessary, please alway use the original

packing material to avoid the risk of damage.

3.3 Service

If any servicing or repair of a Clearaudio product is necessary, please rst contact your dealer or

distributor. Alternatively contact Clearaudio directly and we will advise you of your nearest service

location.

PLEASE RETAIN ALL ORIGINAL PACKAGING. You will need it if this product has to be shipped or

otherwise transported.

Any further questions you may have about this product should be directed to your local dealer or

direct to Clearaudio at:

Clearaudio electronic GmbH

Spardorfer Str. 150

91054 Erlangen

Germany

Phone: +49 9131 40300 100

Fax: +49 9131 40300 119

www.clearaudio.de

www.analogshop.de

info@clearaudio.de

Altri manuali per Tracer

Indice

Lingue:

Altri manuali Clearaudio Giradischi

Clearaudio

Clearaudio Jubilee MM Manuale utente

Clearaudio

Clearaudio Master Innovation Series Manuale utente

Clearaudio

Clearaudio Charisma V2 MM Manuale utente

Clearaudio

Clearaudio Innovation Wood Manuale utente

Clearaudio

Clearaudio Performance DC Manuale utente

Clearaudio

Clearaudio CMB-Bearing Manuale utente

Clearaudio

Clearaudio Concept Manuale utente

Clearaudio

Clearaudio concept active Manuale utente

Clearaudio

Clearaudio Satisfy Manuale utente

Clearaudio

Clearaudio Smart matrix professional Manuale utente

Clearaudio

Clearaudio smart power 12V Manuale utente

Clearaudio

Clearaudio Smart matrix professional Manuale utente

Clearaudio

Clearaudio TT3 Manuale utente

Clearaudio

Clearaudio Statement V2 Manuale utente

Clearaudio

Clearaudio Double Matrix Professional Manuale utente

Clearaudio

Clearaudio Magnify Manuale utente

Clearaudio

Clearaudio Statement TT1 Manuale utente

Clearaudio

Clearaudio Champion Manuale utente

Clearaudio

Clearaudio Emotion SE Manuale utente

Clearaudio

Clearaudio Master Innovation Black Manuale utente

Clearaudio

Clearaudio Charisma V2.1 MM Manuale utente

Clearaudio

Clearaudio Maximum Solution Manuale utente

Clearaudio

Clearaudio Emotion SE Manuale utente

Clearaudio

Clearaudio Reference Jubilee Manuale utente

Manuali Giradischi popolari di altre marche

Gemini

Gemini CDT-05 MKII Manuale utente

Rotel

Rotel RP-820 Manuale utente

Shuman

Shuman MC-250BT Manuale utente

Stanton

Stanton STR8-150 Manuale utente

Audio Technica

Audio Technica AT-LPW40WN Manuale utente

Crosley

Crosley McQueen CR7011-GY Manuale utente

Reloop

Reloop SMP-1 Manuale utente

auna

auna TT-Classic Plus Manuale utente

COMO AUDIO

COMO AUDIO Turntable Analog Manuale utente

Dual

Dual 1009 F Manuale utente

REED

REED Muse3C Manuale utente

AXIOMTEK

AXIOMTEK OPS883-H Series Manuale utente

Pioneer

Pioneer PL-71 Manuale utente

Vestax

Vestax PDX-a1 Manuale utente

Denon

Denon DP-400 Manuale utente

Dual

Dual 504 Manuale utente

Audio-Techica

Audio-Techica AT-LP60XBT Manuale utente

Goldring

Goldring G99 Manuale utente