Clearfield FieldSmart 36 Manuale utente
FieldSmart®Fiber Distribution Point (FDP)
36, 96 & 144 Port Indoor Wall Box
Installation Manual ____________________________________________________
Manual 019751 REV A - Sept 2018
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
2
FieldSmart®Fiber Distribution Point (FDP)
36, 96 & 144 Port Indoor Wall Box
Installation Manual ______________________________________________________
Manual 019751 REV A - Sept 2018
Table of Contents
Application 3
Description 3
Technical Specications 3
Indoor Wall Box Component Views 4
Wall Box Installation 7
Wall Box Access 8
Cable Preparation and Installation 9
Grounding 11
Sealing the Wall Box 11
Fiber Splicing 12
Jumper Installation 14
PON Splitter Installation 15
Connector Cleaning Procedure 17
Standard Warranty 20
Proprietary Notice 21
Technical Support 21
3
FieldSmart®Fiber Distribution Point (FDP)
36, 96 & 144 Port Indoor Wall Box
________________________________________________________Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 019751 REV A - Sept 2018
Technical Specications
Description
Application
36 Indoor 96 Indoor 144 Indoor
Dimensions 10.5” H x 16.0” W x 5.5” D 15.0” H x 27.5” W x 11.5” D 24” H x 26” W x 8” D
Port Density Up to 36 ports Up to 96 distribution ports and
12 feeder ports
Up to distribution 144 ports and
24 feeder ports
Splitter Capacity N/A Up to 6 Ruggedized Splitters Up to 9 Ruggedized Splitters
Splice Capacity 12 or 24 splice congurations in each Clearview Blue Cassette
Storage Capacity Up to 5 meters of 12-ber IFC jacketed ber
Cassette Types
Supported Clearview® Classic and Clearview Blue
Connector Types SC/UPC, SC/APC, LC/UPC, LC/APC, FC/UPC, FC/APC, ST/UPC, MPO
Cable Types Indoor Riser, Indoor Plenum, Indoor/Outdoor
Material 18 gauge cold rolled steel (almond powder coating)
The Fieldsmart Fiber Delivert Point (FDP) Indoor Wall Box has
been optimized for MDU (Multi Dwelling Unit) applications. With
the Clearview® Cassette at its heart, the FieldSmart FDP Wall
Box gives service providers plug-and-play integration based
upon the conguration requirements of their application. With
the ability to house one to three 1 x 32 splitters and a compact
footprint, indoor wall boxes are perfect for the deployment of
PON-based FTTH networks in an MDU environment. Additional
applications include ber demarcations, entrance facilities and
security systems (CCTV).
The FieldSmart Fiber Delivery Point (FDP) Indoor Wall Box is Clearview optimized, allowing the user to easily scale from 12
to 36, 96, or 144 ports. Designed from conception to provide fast and easy ber jumper routing with ease of access to all
circuits, the FieldSmart FDP Wall Box system is craft-friendly, keeping the installer’s needs for quick deployment, intuitive
use and ease of maintenance as the top priorities. Utilizing Clearview Cassettes, the product is shipped loaded with the
industry standard adapter of choice and can be congured for patch only, patch and splice and MPO plug-and-play
applications, while supporting all cable constructions for the inside plant. It is ring cut or mid-span capable, allowing for the
distribution cables to be daisy-chained and for ber hand-off through the riser. The wall box has a swinging bulkhead for
rear-access to the cassettes and protects sub-unit slack storage, security enabled doors for extra protection and a solid
enclosure to protect ber terminations from damage. Designed from conception to provide fast, easy ber jumper routing
and ease of access to all circuits, the wall box system is craft-friendly, keeping the installer’s needs for quick deployment,
intuitive use and ease of maintenance as the top priority.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
4
FieldSmart®Fiber Distribution Point (FDP)
36, 96 & 144 Port Indoor Wall Box
Installation Manual ______________________________________________________
Manual 019751 REV A - Sept 2018
Indoor Wall Box Component Views
4
56
2
3
36 Port Indoor Wall Box
1
1. Security Access Doors
2. Clearview Blue Cassettes
(Left Exit for Patch and Splice)
3. Slack Storage for Jumpers
4. Cable Clamp Locations (Top and Bottom)
5. Bridge Lances for Securing Buffer Tube Slack
6. Designation Card
7. Ground Lug
7
5
FieldSmart®Fiber Distribution Point (FDP)
36, 96 & 144 Port Indoor Wall Box
________________________________________________________Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 019751 REV A - Sept 2018
96 Port Indoor Wall Box
4
5
6
23
1
1. Security Access Doors
2. Clearview Blue Cassettes
(Left Exit for Patch and Splice)
3. Slack Storage for Jumpers or Splitter Legs
4. Cable Clamp Locations (Top and Bottom)
5. Bridge Lance for Securing Buffer Tube Slack
6. Designation Card
7. Staging Plate Area
8. Ground Bar
7
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
6
FieldSmart®Fiber Distribution Point (FDP)
36, 96 & 144 Port Indoor Wall Box
Installation Manual ______________________________________________________
Manual 019751 REV A - Sept 2018
4
6
2
3
144 Port Indoor Wall Box
1
1. Security Access Doors
2. Distribution Cassettes
3. Feeder Cassettes
4. Radius Limiting Spools
5. Cable Clamp Locations (Top and Bottom)
6. Splitter Cage
7. Staging Plate Area
8. Designation Card
9. Ground Bar
5
9
8
7
7
FieldSmart®Fiber Distribution Point (FDP)
36, 96 & 144 Port Indoor Wall Box
________________________________________________________Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 019751 REV A - Sept 2018
Wall Box Installation
The wall box is installed via the 4 holes
located in the rear of the enclosure.
Hold the wall box up to the mounting surface and mark the
hole locations with a marker.
Note: A level may be used to ensure that the wall box is
mounted straight.
Pilot holes can then be drilled at each mark. Using appropriate fasteners for the material, attach the wall box to the
surface.
Mounting
Holes
1.
2.
3.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
8
FieldSmart®Fiber Distribution Point (FDP)
36, 96 & 144 Port Indoor Wall Box
Installation Manual ______________________________________________________
Manual 019751 REV A - Sept 2018
Wall Box Access
The interior of the wall box can be accessed by loosening the security screws on each of the two doors using a 7/16”
thin wall socket or a telecommunications industry “can wrench”.
Note: The door on the right provides access to the distribution ports and the jumper slack storage, while the door on
the left is used to access the splicing compartment.
The cassette splicing area can be locked by pressing in the tabs at both the top and bottom of the wall box, and can
then be opened again by pressing the tabs back and swinging the bulkhead open.
1.
2.
9
FieldSmart®Fiber Distribution Point (FDP)
36, 96 & 144 Port Indoor Wall Box
________________________________________________________Installation Manual
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
Manual 019751 REV A - Sept 2018
Cable Preparation and Installation
The slack storage compartment of the wall box is large enough to
accommodate 15 feet of buffer tube slack from a cable matching the
wall box port count. However, it is recommended that you only prep
as much cable as you will need to perform your work.
Note: You will need approximately 3 feet of ber inside the splice
tray so add that to the total prep length.
The splicing side of the indoor wall box will accommo-
date a cable that is prepped in either a ring cut/mid-span
opening fashion or at the end of the cable.
Note: An OSP cable is shown in the picture, but an IFC
tight buffer cable can be used as well. If a shielded cable
is used, a bonding clamp 3M 4460-D or equivalent can
be used.
In order to install cable in the splicing side of the wall box, the feed
through plate will need to be removed by removing the screws hold-
ing it in place.
Ring Cut/Mid-span End of Cable Opening
1.
2.
3.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • [email protected]
10
FieldSmart®Fiber Distribution Point (FDP)
36, 96 & 144 Port Indoor Wall Box
Installation Manual ______________________________________________________
Manual 019751 REV A - Sept 2018
Locate the green cable clamp shells and corresponding barrel nuts from the ship-along hardware.
The cable clamp shells are used in same size pairs. Avoid using a clamp that is too small and does not easily close
around the cable. Use the next larger clamp and grommet tape. The provided grommet tape should be applied to one
or two of the clamp shells prior to installation, depending upon the size of the cable.
Use the included barrel nuts and cable clamp shells to fasten the cable to the wall box on the threaded studs inside the
wall box. The cable should be mounted so that the breakout is slightly beyond the end of the clamp shell. After
mounting the cable, replace the feed through plate with the same screws.
4.
5.
6.
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Clearfield Rack e supporto
