Æ
Æ
Æ
Æ
Æ
Æ
Æ
TO MAKE OR ANSWER A CALL USING A CORDED PHONE WITH HANDSET LIFTER CONNECTED
OPTIONAL LIFTER SET UP FOR THE QH2 HUB *Lifter not included*
QUICK START GUIDE
Æ
Æ
Æ
Æ
3. TO MAKE OR ANSWER A CALL USING A CORDED PHONE
STEP 2: Manually
lift the handset from
the base.
STEP 2: On the underside
of the lifter, remove the
paper backing from the
two pieces of tape.
STEP 3: Firmly press the
bottom of phone base lifter,
directly below the earpiece,
so that it lies beneath the
handset arm.
STEP 4: Connect the
L-shaped connector to
the LIFT port on the
bottom of hub...
STEP 5: ...then connect
the other end of the
cable firmly to the port
on the top of the lifter.
Look for a red glow the
on lifter.
STEP 3: On the hub,
press and release
the MFB. You will
hear a dial tone or
the caller in your
listening device.
Dial or talk.
STEP 1: Remove the
handset from the
phone base.
STEP 2: On the hub, press
and release the MFB. The
lifter raises the phone
handset and you hear a dial
tone or the caller in your
listening device. Dial or talk.
STEP 3: Slide the
TONE slider on the
hub until you hear the
tone that you prefer
[ OPTIONAL]
STEP 4: To end the call,
press and release the MFB
and the lifter returns the
phone handset to the base.
STEP 4: Slide the
TONE slider on the
hub until you hear
the tone that you
prefer.
[ OPTIONAL ]
STEP 5: To end the
call, press and
release the MFB.
STEP 6: Manually
hang up the hand-
set.
Please Note: You will need to manually remove the handset from the base to make a
call and replace it to hang up.
Please Note: Bluetooth connection required for lifter.
STEP 1: Wear your
Bluetooth listening
device and remain
within 33 feet of the
QH2 hub.
STEP 1: Wear your
Bluetooth listening
device and remain
within 33 feet of the
QH2 hub.
